Post Your Overclock! [2]

Page 91 of 123 FirstFirst ... 818990919293101 ... LastLast

  1. Posts : 5,915
    Windows 10 Pro X64
       #901

    For AddRam


    Here are shots from Click Bios. I have everything pretty much on Auto except the Core voltage @ +.06. I do not have some of the other settings you have such as vdroop and digi something. I set my Bios like this and can boot at 4.6 at the highest, the other overclocks I have are software assisted with Intel Extreme Tuning Utility. I hope this helps you

    Post Your Overclock! [2]-bios-1.png Post Your Overclock! [2]-bios-2.png

    Post Your Overclock! [2]-bios-3.png
      My Computer


  2. Posts : 7,470
    Windows 10 Home Premium 64bit sp1
       #902

    Dude said:
    Here are shots from Click Bios. I have everything pretty much on Auto except the Core voltage @ +.06. I do not have some of the other settings you have such as vdroop and digi something. I set my Bios like this and can boot at 4.6 at the highest, the other overclocks I have are software assisted with Intel Extreme Tuning Utility. I hope this helps you

    Post Your Overclock! [2]-bios-1.png Post Your Overclock! [2]-bios-2.png

    Post Your Overclock! [2]-bios-3.png

    Ahh good old MSI Bios don't miss it one Bit looking good Doug
      My Computer


  3. Posts : 5,915
    Windows 10 Pro X64
       #903

    Solarstarshines said:
    Dude said:
    Here are shots from Click Bios. I have everything pretty much on Auto except the Core voltage @ +.06. I do not have some of the other settings you have such as vdroop and digi something. I set my Bios like this and can boot at 4.6 at the highest, the other overclocks I have are software assisted with Intel Extreme Tuning Utility. I hope this helps you

    Post Your Overclock! [2]-bios-1.png Post Your Overclock! [2]-bios-2.png

    Post Your Overclock! [2]-bios-3.png

    Ahh good old MSI Bios don't miss it one Bit looking good Doug
    Yeah it is frustrating. I did not know they took out offset, and went with vdroop on the last few board generations. They might have brought it back for Haswell, but I'm not going that route, I am happy with my mighty little board, but will go Asus as soon as I can. Guess I was out of the game for a little to long and didn't do enough research before I came back in. I was really suprised I could get the OC I did, even though it was software induced. I prefer being able to do it from the BIOS. The other settings that AddRam has in his Bios should be able to let him OC higher. Here is some info from the MSI forums

    http://forum-en.msi.com/index.php?topic=161966.0
      My Computer


  4. Posts : 7,470
    Windows 10 Home Premium 64bit sp1
       #904

    Dude said:
    Solarstarshines said:
    Dude said:
    Here are shots from Click Bios. I have everything pretty much on Auto except the Core voltage @ +.06. I do not have some of the other settings you have such as vdroop and digi something. I set my Bios like this and can boot at 4.6 at the highest, the other overclocks I have are software assisted with Intel Extreme Tuning Utility. I hope this helps you

    Post Your Overclock! [2]-bios-1.png Post Your Overclock! [2]-bios-2.png

    Post Your Overclock! [2]-bios-3.png

    Ahh good old MSI Bios don't miss it one Bit looking good Doug
    Yeah it is frustrating. I did not know they took out offset, and went with vdroop on the last few board generations. They might have brought it back for Haswell, but I'm not going that route, I am happy with my mighty little board, but will go Asus as soon as I can. Guess I was out of the game for a little to long and didn't do enough research before I came back in. I was really suprised I could get the OC I did, even though it was software induced. I prefer being able to do it from the BIOS. The other settings that AddRam has in his Bios should be able to let him OC higher. Here is some info from the MSI forums

    WHY No Vcore voltage Offsets?
    I never used the Oc Genie or MSI control center just seemed wrong and the actual bios was locked at 1.44volts it was killing me I couldn't get a stable 4.5ghz on a 8120 without maxing the bios voltage and putting on APS on ACTIVE PHASE SWITHCING
      My Computer


  5. Posts : 5,915
    Windows 10 Pro X64
       #905

    I don't use OC genie, it will only go to 4.2 anyway. Control center works somewhat, but the Intel Extreme Tuning utillity allowed me to add some voltage, that is the only way I could OC to 5ghz. But I can use auto settings in the bios and run 4.6 which isn't bad
      My Computer


  6. Posts : 26,468
    Windows 11 Pro
       #906

    What board does AddRam have?

    EDIT: never mind. I did what I should have done in the first place, I looked it up.
      My Computer


  7. Posts : 6
    Windows 7 Professional 64 bit
       #907

    SO... Mr. Dude, this is where you come to hang out I see! LOL :) Not sure I have ever posted here and if I have it was YEARTS AGO... I'm a lurker, hanging out in the shadows. And now that I know your secret, I'll give XTU a try.

    I agree with you, I have been pretty impressed by this little board but really wish they hadn't of skimped on some of the BIOS access to adjustable voltages. And IF, Social Security paid a little more, I could have afforded an Asus Mobo. OH WELL, it is what it is.

    I'll work on my respectful 4.4 GHz OC later today maybe. Thanks for all of your help. I appreciate you NOT making me feel small and foolish with my stupid questions. At my age diapers, drool and stupid questions are about all I have left! LOL Well, not that old, just brain damaged from the accident.

    Have a great day guys!

    Mr. Bill


    Elko, Nevada
      My Computer


  8. Posts : 26,468
    Windows 11 Pro
       #908

    Hello, Bulldog and welcome to the forums. If you are interested in overclocking you may want to give this a read through. You will probably find some helpful info.
    Official Seven Forums Overclock Leader boards
    Last edited by essenbe; 10 Sep 2013 at 14:16.
      My Computer


  9. Posts : 3,118
    Win7 Home Premium x64 SP1
       #909

    Ello Bulldog and welcome to Seven Forums
    Nice oc mate, there's noubt wrong with 4.4Ghz
      My Computer


  10. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #910

    Hiya Mr. Bill. It takes a bit of craziness to overclock anyway, you'll be fine here.

    Post Your Overclock! [2]-4948-ivy.png
      My Computer


 
Page 91 of 123 FirstFirst ... 818990919293101 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 18:45.
Find Us