Post Your Overclock! [2]

Page 32 of 123 FirstFirst ... 22303132333442 ... LastLast

  1. Solarstarshines
    Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       New #311

    rodpgfx said:
    Crazy how how difference there is in the two. I'm used to AMD now, and I could OC that board to almost 280 if I wanted to. I'd like to know how high would be optimal for this sabertooth Z77 to go. I'd like to get better than 1:7 ratio on my ram
    Well you need to read up on the Ram you are runing to find out it's full potential
    I know the ram im running can be Oc'ed to 1800mhz before i need to bump voltage might be worth a look
      My Computer
    Quote Quote

  3. rodpgfx
    Posts : 30
    Windows 8 pro 64 bit
       New #312

    FFS I got a new problem now!
    It sounds like my computer has a heart beat lol
    I'm trying to watch a movie, and there is a glitch sound, same pace as a heartbeat, in my speakers
    I've uninstalled the audio driver and re-installed.
    I've unplugged all USB devices in back.

    Lost now
    Starting to think it wasn't the AMD stuff giving me the problems, maybe my PS or power bar
      My Computer
    Quote Quote

  4. A Guy
    Posts : 53,363
    Windows 10 Home x64
       New #313

    You can monitor your PSU in real time, and over time with OCCT

    Home

    A Guy
      My Computer
    Quote Quote

  6. Pedroc1999
    Posts : 1,326
    Windows 7 Ultimate x86
       New #314

    That is some great overclocks going on here, cant wait till i make a rig with a non-oem board.... obviosly
      My Computer
    Quote Quote

  7. D3LL
    Posts : 570
    Windows 7
       New #315

    Just hit around 4Ghz.
      My Computer
    Quote Quote

  8. essenbe
    Posts : 26,869
    Windows 11 Pro
       New #316

    Nice job. Congratulations
      My Computer
    Quote Quote

  10. D3LL
    Posts : 570
    Windows 7
       New #317

    essenbe said:
    Nice job. Congratulations
    Thanks very much :)!
      My Computer
    Quote Quote

  11. A Guy
    Posts : 53,363
    Windows 10 Home x64
       New #318

    D3LL said:
    Just hit around 4Ghz.
    Good one

    A Guy
      My Computer
    Quote Quote

  12. kbrady1979
    Posts : 2,973
    Windows 7 Professional 64bit SP1
       New #319

    Finally decided to push the 3570K a little more. I have been running @ 4.4GHz for about 2 weeks and it is completely stable. Stable under Prime95 for 12 hours and stable with AIDA64 for 12 hours as well. I can still fine tune this OC and lower the voltage some, but I wanted to make sure it was good to go before I started fiddling with it again. The temps are very good considering I have the heat cranked up in the house because we finally got some cold weather outside, and there is a heating vent 3 feet away from the rear of the PC case. Loving this CPU!

    Post Your Overclock! [2]-oc-snippet.jpg
      My Computer
    Quote Quote

  13. A Guy
    Posts : 53,363
    Windows 10 Home x64
       New #320

    Very nice Kelly Couldn't get 4.4 huh?

    A Guy
      My Computer
    Quote Quote

 
Page 32 of 123 FirstFirst ... 22303132333442 ... LastLast

  Related Discussions
Should I overclock my CPU?
in PC Custom Builds and Overclocking

Hello all, Recently my temps of my CPU have gone out of control, however, I disabled turbo mode in my bios and it works much better. Temps are less than 70c under full load My question is should I overclock this CPU I have? specs: CPU: Intel core i5 650 3.20GHz Mobo: Intel dq57tm
i had recently built a new computer. after installing windows 7 everything was fine, except for during start-up it'd say 'no keyboard deteced'. which it wasn't detecting it because i couldnt acess bios during this. once i came to the windows log in screen, it was then reading the keyboard. a...
Cant seem to get an overclock
in PC Custom Builds and Overclocking

Hi have an i7 2700k and an Asus P8H 61-M LE usb3 mobo and when i do a autotune overclock it says 4.0ghz and should set in the bios but it dosent,could anyone help me out on this one please Thanks
Post Your Overclock!
in PC Custom Builds and Overclocking

Here you can Post your Overclocks and Benchmark results! I have added download links for your convenience. Latest GPU-Z v0.3.7 Latest CPU-Z v1.52 3DMark Vantage Download here!!
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 01:40.
Find Us