Show Us Your Rig [4]


  1. Posts : 5,915
    Windows 10 Pro X64
       #1711

    I have thought about making the move to liquid, but since my processor is a non k I wont go that route. When I get the urge and get a 3570k, I will probably do that.

    The stock cooler works decent enough, I have a slight overclock to 3.6, it stays in 30'sC idle and close to 60 under load.

    The coolermaster I was looking at should be a little more quiet, plus it looks cool.
      My Computer


  2. Posts : 11,425
    Windows 7 Ultimate 64
    Thread Starter
       #1712

    Duder,
    Without hesitation I would have you drop this bad boy in your case. I have two of these running and a H100 and H50. I've upgraded all with Noctua fans running wide open and the systems are dead silent.

    Thermaltake CLW0217 Water 2.0 Extreme/All-In-One Liquid Cooling System - Newegg.com

    Show Us Your Rig [4]-hpim2940.jpg

    Show Us Your Rig [4]-hpim2955.jpg

    Show Us Your Rig [4]-hpim2961.jpg

    Show Us Your Rig [4]-hpim2968.jpg
      My Computer


  3. Posts : 5,915
    Windows 10 Pro X64
       #1713

    linnemeyerhere said:
    Duder,
    Without hesitation I would have you drop this bad boy in your case. I have two of these running and a H100 and H50. I've upgraded all with Noctua fans running wide open and the systems are dead silent.

    Thermaltake CLW0217 Water 2.0 Extreme/All-In-One Liquid Cooling System - Newegg.com

    My case is set for liquid, and looking at that makes me want it. I'm gonna wait on it until I get a K chip though as it would be a shame not to oc with that.
      My Computer


  4. Posts : 599
    Windows 7 Ultimate x64
       #1714

    linnemeyerhere said:
    Duder,
    Without hesitation I would have you drop this bad boy in your case. I have two of these running and a H100 and H50. I've upgraded all with Noctua fans running wide open and the systems are dead silent.

    Thermaltake CLW0217 Water 2.0 Extreme/All-In-One Liquid Cooling System - Newegg.com

    Show Us Your Rig [4]-hpim2940.jpg

    Show Us Your Rig [4]-hpim2955.jpg

    Show Us Your Rig [4]-hpim2961.jpg

    Show Us Your Rig [4]-hpim2968.jpg
    Are those 120x120mm fans? Because I also use a Thermaltake All in one, but it's a pro :) So I was wondering if I could replace my 2 120mm fans to lower the noise level a bit. ( Not that it's loud to begin with, but the quieter the better :) )
      My Computer


  5. Posts : 1,568
    Windows 8.1.1 64bit
       #1715

    Would this work well in my machine ?
    Looking to replace the stock cooler with 80mm fan.
      My Computer


  6. Posts : 5,915
    Windows 10 Pro X64
       #1716

    COMPUTIAC said:
    Would this work well in my machine ?
    Looking to replace the stock cooler with 80mm fan.
    It's a pretty good size cooler, look at the specs and determine if your case can fit it.
      My Computer


  7. Posts : 11,425
    Windows 7 Ultimate 64
    Thread Starter
       #1717

    crankypenguin said:
    linnemeyerhere said:
    Duder,
    Without hesitation I would have you drop this bad boy in your case. I have two of these running and a H100 and H50. I've upgraded all with Noctua fans running wide open and the systems are dead silent.

    Thermaltake CLW0217 Water 2.0 Extreme/All-In-One Liquid Cooling System - Newegg.com

    Show Us Your Rig [4]-hpim2940.jpg

    Show Us Your Rig [4]-hpim2955.jpg

    Show Us Your Rig [4]-hpim2961.jpg

    Show Us Your Rig [4]-hpim2968.jpg
    Are those 120x120mm fans? Because I also use a Thermaltake All in one, but it's a pro :) So I was wondering if I could replace my 2 120mm fans to lower the noise level a bit. ( Not that it's loud to begin with, but the quieter the better :) )
    Yes those are P series 120mm fans I also have the F series on one radiator. Can't say there's any difference between them. I run them off the Thermaltake software and they flux between 800-1400 rpm. On the H100 and 50 they're running full 12v.
      My Computer


  8. Posts : 1,568
    Windows 8.1.1 64bit
       #1718

    Dude said:
    COMPUTIAC said:
    Would this work well in my machine ?
    Looking to replace the stock cooler with 80mm fan.
    It's a pretty good size cooler, look at the specs and determine if your case can fit it.
    Nope, won't fit. It is 6.25" tall and I have only 4 7/8" of clearance.
    Anyone have a suggestion as to what I can use instead ?
      My Computer


  9. Posts : 26,447
    Windows 11 Pro
       #1719

    Go with one of the self contained liquid units like the H50 or H80. If you run short on space, you can mount the rear fan on the outside of the case.
      My Computer


  10. Posts : 11,425
    Windows 7 Ultimate 64
    Thread Starter
       #1720

    COMPUTIAC said:
    Dude said:
    COMPUTIAC said:

    Would this work well in my machine ?
    Looking to replace the stock cooler with 80mm fan.
    It's a pretty good size cooler, look at the specs and determine if your case can fit it.
    Nope, won't fit. It is 6.25" tall and I have only 4 7/8" of clearance.
    Anyone have a suggestion as to what I can use instead ?
    +1 to Steve's suggestion even look at the H70 and use you current fan or better yet get a high pressure quiet model !
    Corsair CW-9060002-WW Hydro H70 CORE High Performance Liquid CPU Cooler - Socket LGA 1155, LGA 1366, LGA 2011,AM2, AM3, FM1 at TigerDirect
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:53.
Find Us