Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Missing BIOS settings in jumperfree configuration

19 Dec 2012   #1

Windows 7 Professional 64bit
Missing BIOS settings in jumperfree configuration

I've been trying to overclock my computer, but it seems I'm missing cpu/nb frequency and the option for load line calibration as well as possibly a few others I forget. I've seen other people with the same mobo and cpu that had the options available to them, any ideas? Also bonus question: I have my voltage set to 1.487, but in cpu-z I never see it get that high, it's usually sitting at 1.456 and bouncing between 1.47 and 1.44, which is mostly why I was looking for llc, is that normal? It seems a bit extreme for a normal vdrop to me.

Attached Thumbnails
Missing BIOS settings in jumperfree configuration-12.jpg  
My System SpecsSystem Spec
19 Dec 2012   #2

Windows 7 x64 Ultimate and numerous virtual machines

Version 2301 is the latest version of the bios. Have you tried a bios update, this is the usual cause of missing features, an older bios version.
My System SpecsSystem Spec
19 Dec 2012   #3

Windows 7 Professional 64bit

I thought that could be it, but I didn't see anything that stood out to me in the updates. I'll have to look again
My System SpecsSystem Spec

19 Dec 2012   #4

Windows 7 Professional 64bit

aaand there it is! much obliged
weird thing though, I set my bios back up the same way I had it before, but in windows it said everything (cpu, ram, nb, hypertransport) was running consistently about .4% higher than what was set. amd overdrive also confirmed that it was running faster than the target speed. I reset the bios to default, which seemed to fix it, but I have yet to try to oc it again
My System SpecsSystem Spec

 Missing BIOS settings in jumperfree configuration

Thread Tools

Similar help and support threads
Thread Forum
I can't access BIOS settings because BIOS assumes Windows is resuming
Good evening! A week ago I reinstalled Windows 7 in EFI mode on my laptop, and now I've got this problem: whenever I turn on my computer after a shutdown, the BIOS says "System Resuming" instead of "Press F2 to enter settings". This makes impossible for me to access BIOS settings. Previously, my...
General Discussion
System Configuration settings
using W7, 64 bit OS In System Configuration under the general tab "Selective Startup" is selected with the top two squares hilighted. Is that the correct option as opposed to "Normal Startup?" Under the Services tab there are 161 services ticked, is that also correct?
General Discussion
BIOS POST configuration question
Hello, I have recently installed an internal card reader and started to notice a slower boot time. After sitting next to my PC during POST I witnessed that it was caused due to the BIOS going through each and every card slot (even when not occupied) and then it 'initializes' them. It persists...
Performance & Maintenance
BIOS: Can access BIOS utility, but cannot change settings.
Hello: This is my first post here, so hi to everyone. I just got an ASUS X401a Notebook and I want to use a flash drive to boot from Linux. I need to change the sequence in the BIOS so that the flash drive is first choice to boot from. I have no problem accessing the BIOS utility, but it...
General Discussion
Creepy BIOS Problem with Missing ram settings!
Hi, ive been wondering for a while. why i dont have memory settings on my bios. while trying to use memset, i cam across this screenshots.. nothing comes up on the 2nd dim with memset. i used SIW and the serial numbers are pretty odd. there's also a warning with SIW "warning wrong bios value" i...
Hardware & Devices
Okay, it is going to sound like I am stupid, but I once set my next boot to enter to BIOS, and now I can't remember how to do it on my new laptop through Msconfig.exe I don't know how to enter my BIOS on boot(dknow what F...)
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:13.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App