New
#11
Good luck with getting it a 100% power on those gpu's
Sounds like when you get that fixed your going to burn rubber on those benches
Good luck with getting it a 100% power on those gpu's
Sounds like when you get that fixed your going to burn rubber on those benches
We shall see enit. Thats if i ever manage to get em too 100% lol
I'm still tweaking my cpu oc too as i thought it was stable at 4.5 but then it failed wei. It seems ok now i've upped the vcore a tad. We shall see.
I found with the older fx chips like the 4100 ,6100, 8120,8150 take alot more juice to control vs the Piledriver the Pile driver can operate a couple notches lower in V-core then the first generation
so to get it super stable i would assume you need to be 1,45 or 1,46 to be solid those chips were terrible in stability unless it has alot of juice that is what i have seen in the past months with overclocking these chips
Cheers chap, i shall keep trying as it just failed IBT on the 10th pass with the error linpak binary stopped unexpectedly. Vcore is 1.452 with llc high but its drooping to 1.428 under load.
My Fx has a higher vid of 1.337
try 1.46 and it it runs through your 10 then your fine i don't do the full ten if you can pass 5 to 8 then i would say it is fine 10 passes is kinda extreme but if you want to make sure tap it to the 1.46 im going to jump to the oc thread i don't want to get in trouble for hijacking or anything lol
I think so as Amd chips don't do handle the physics like intel do. I think it was physics but i maybe wrong?