Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 4818MHz Amd FX-8350

11 May 2013   #11
BigTabs

Windows 7 64 (bit)
 
 

Which part on aida is socket temp ????




Attached Thumbnails
4818MHz Amd FX-8350-aida.png  
My System SpecsSystem Spec
.
11 May 2013   #12
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by BigTabs View Post
Which part on aida is socket temp ????
for you it would be the Motherboard I figure because it show on HW monitor your Mother Board and Socket which you have to keep a eye on too because you can burn the socket before the CPU and then there goes the CPU

If you look it has three different areas of temps for the CPU /Motherboard and the actual CPU


Attached Thumbnails
4818MHz Amd FX-8350-socket.png  
My System SpecsSystem Spec
11 May 2013   #13
BigTabs

Windows 7 64 (bit)
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by BigTabs View Post
Which part on aida is socket temp ????
for you it would be the Motherboard I figure because it show on HW monitor your Mother Board and Socket which you have to keep a eye on too because you can burn the socket before the CPU and then there goes the CPU

If you look it has three different areas of temps for the CPU /Motherboard and the actual CPU

Your the brains thank you what would i do with out Solarstarshines helping me
My System SpecsSystem Spec
.

11 May 2013   #14
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by BigTabs View Post
Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by BigTabs View Post
Which part on aida is socket temp ????
for you it would be the Motherboard I figure because it show on HW monitor your Mother Board and Socket which you have to keep a eye on too because you can burn the socket before the CPU and then there goes the CPU

If you look it has three different areas of temps for the CPU /Motherboard and the actual CPU

Your the brains thank you what would i do with out Solarstarshines helping me
No problem I enjoy helping out my friend just giving you the do's and don't because you know the motherboard and socket temps count doesn't matter if you have fancy cooling or not if it gets to almost 60 that is not a good sign you don't ever want that chip to go above 55 c if you can help it 61 is the ceiling but for all safety don't go above it like some do and ignore the over volting some don't even test and assume they are rock solid
My System SpecsSystem Spec
11 May 2013   #15
BigTabs

Windows 7 64 (bit)
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by BigTabs View Post
Quote   Quote: Originally Posted by Solarstarshines View Post
for you it would be the Motherboard I figure because it show on HW monitor your Mother Board and Socket which you have to keep a eye on too because you can burn the socket before the CPU and then there goes the CPU

If you look it has three different areas of temps for the CPU /Motherboard and the actual CPU

Your the brains thank you what would i do with out Solarstarshines helping me
No problem I enjoy helping out my friend just giving you the do's and don't because you know the motherboard and socket temps count doesn't matter if you have fancy cooling or not if it gets to almost 60 that is not a good sign you don't ever want that chip to go above 55 c if you can help it 61 is the ceiling but for all safety don't go above it like some do and ignore the over volting some don't even test and assume they are rock solid


On min can you point out where i should be looking its differant to yours well same but info is not there


Attached Thumbnails
4818MHz Amd FX-8350-hw.png  
My System SpecsSystem Spec
11 May 2013   #16
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by BigTabs View Post
Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by BigTabs View Post


Your the brains thank you what would i do with out Solarstarshines helping me
No problem I enjoy helping out my friend just giving you the do's and don't because you know the motherboard and socket temps count doesn't matter if you have fancy cooling or not if it gets to almost 60 that is not a good sign you don't ever want that chip to go above 55 c if you can help it 61 is the ceiling but for all safety don't go above it like some do and ignore the over volting some don't even test and assume they are rock solid


On min can you point out where i should be looking its differant to yours well same but info is not there
TMPIN0
TMPIN1 -TMPIN2 not sure why it is there could be the chip itself if you notice lot lower then the others
could be ram sensor but I know for sure TMPIN0 and TMPIN1 are the cpu and mb

lol lol I was right read here http://randomroms.com/?p=22
My System SpecsSystem Spec
11 May 2013   #17
BigTabs

Windows 7 64 (bit)
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by BigTabs View Post
Quote   Quote: Originally Posted by Solarstarshines View Post
No problem I enjoy helping out my friend just giving you the do's and don't because you know the motherboard and socket temps count doesn't matter if you have fancy cooling or not if it gets to almost 60 that is not a good sign you don't ever want that chip to go above 55 c if you can help it 61 is the ceiling but for all safety don't go above it like some do and ignore the over volting some don't even test and assume they are rock solid


On min can you point out where i should be looking its differant to yours well same but info is not there
TMPIN0
TMPIN1 -TMPIN2 not sure why it is there could be the chip itself if you notice lot lower then the others
could be ram sensor but I know for sure TMPIN0 and TMPIN1 are the cpu and mb

lol lol I was right read here HWMonitor TMPIN0, TMPIN1, TMPIN2 « Random ROMs
your a fecking star thank you
My System SpecsSystem Spec
12 May 2013   #18
ganjiry

Win7 Home Premium x64 SP1
 
 

Very nice oc's both I need to save me some pennies..
Have you tried HWiNfo64 for monitoring? HWiNFO64 Download
It maybe different for you but i found HW monitor would give low readings on a lot of my voltage's where hwinfo did'nt. It also has a few other feature's including being able to display any of it's readings in an osd via revertuner in Msi Afterburner if needed.
Whatever works best for you though enit


Attached Thumbnails
4818MHz Amd FX-8350-hwinfo.png   4818MHz Amd FX-8350-config.png  
My System SpecsSystem Spec
12 May 2013   #19
BigTabs

Windows 7 64 (bit)
 
 

Yes tried hwfon still 10less than real readings for me
My System SpecsSystem Spec
12 May 2013   #20
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

I have that one sorry didn't mention it earlier
My System SpecsSystem Spec
Reply

 4818MHz Amd FX-8350




Thread Tools




Similar help and support threads
Thread Forum
Which MB for FX-8350 and 16gb 2x8 DDR3 1600
Hi maybe it would have been better to ask this question before parting with my money I bought a bundle which consists of, Had I known at the time of buying that this is an old board I would have stayed well clear of it. I paid extra for insurance cover! AMD X8 Core FX-8350 4.0Ghz ASUS...
PC Custom Builds and Overclocking
Replaced Fx-8350 and still getting x124 Hal.dll BSOD
Please help! I have replaced my fx8350 with a new one and still getting BSOD X124 with Hal.dll error. This happens when running stress test in less then 90 seconds. No over clocking done just stock settings in bios. I can play games fine at least so far with no bsod. It just happened again while...
BSOD Help and Support
FX-8320 vs 8350
Hey guys, quick question here. I want to have a definitive system that will last me for some 4 to 5 years without problems. I currently have the system in my specs, and was thinking about moving up to the FX family for AMD. My store currently has the 8320 on sale for 155 dollars and the...
Hardware & Devices
Voltage ? for 8350 clockers
I just replaced a FX4170 with a FX8350. FSB is at 212 with a 21.5 multiplier giving me 4.558ghz. Anything higher and I get a BSOD from ntoskkl.exe. 2 hrs of P95 and I do not go over 56C with the cpu, that's with the fans and water pump really slow. How much voltage do you guys with 8350's...
PC Custom Builds and Overclocking
FX 8350 8 core Temps seem way to low
I just got this processor a few days ago, its cooled by a corsair H60 Liquid cooler, still havent tweaked the cpu or anything,, all settings are set to auto in the bios. Heres idle screen shot of my temps,,, The pc was on about 5 mins when i clipped this image, at boot Core Temp was showing 6...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:20.
Twitter Facebook Google+