Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: AMD overclock advice.

20 May 2013   #1
madcratebuilder

Win8/8.1,Win7-U64, Vista U64, uncounted Linux distor's
 
 
AMD overclock advice.

This is my first venture into overclocking, take a look at these screen shots and tell me what I should be working on. I know it's pretty mild compared to some of you guys, only about 7-8%. My memory well default to 1866 IF I run two sticks (8mb), but with 16mb it defaults to 1366. 1696 is as fast as I have had all 16mb and be 100% stable. Prime95 torture test has been running a couple of hours now and temps remain as in the screen shot.

AMD overclock advice.-system01.jpg

AMD overclock advice.-sensor01.jpg

AMD overclock advice.-sensor02.jpg




My System SpecsSystem Spec
.
20 May 2013   #2
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Ok if you have ram that runs at 1866 and when you ad the exact same ram to 16 it defaults to 1333 ?

then it has to be one of the memory sticks that are no good should run a mem test
even if they default back to 1333mhz you should have a option to choose it's rated speed im not sure if you mean when you have one set it just goes to 1866 or you have to adjust them to 1866

anyway you have done a very mild oc that probably would not need a voltage change max turbo on FX4170 is 4.3Ghz you are running 4.664Ghz hardly a need for a voltage change the chip is already set pretty high so an increase of 300mhz won't hurt a bit I don't think and if you ran prime with no errors then you should be fine

Looks like a solid OC thus far
My System SpecsSystem Spec
20 May 2013   #3
madcratebuilder

Win8/8.1,Win7-U64, Vista U64, uncounted Linux distor's
 
 

It's a limitation of the cpu, the 4170 well run 1866 with just two sticks but defaults back to 1366 with all four banks filled. AMD has this info buried pretty deep on thier web site. I may do some bench marks with just two sticks to see if it's worth loosing half my ram. I did have the cpu to 4800 but was seeing random errors. I have not played with cpu voltage...yet.

Been playing with the GPU today, this 7770 does not like a lot of OC. I've read that some are getting 1250 core and 1300 mem. Best I can do so far is 1125/1275 and that's with a +10% voltage. Upping the voltage brought the temps dowm. I would push 80C with FurMark and now it's 72-73C with the same fan profile.
My System SpecsSystem Spec
.

20 May 2013   #4
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by madcratebuilder View Post
It's a limitation of the cpu, the 4170 well run 1866 with just two sticks but defaults back to 1366 with all four banks filled. AMD has this info buried pretty deep on thier web site. I may do some bench marks with just two sticks to see if it's worth loosing half my ram. I did have the cpu to 4800 but was seeing random errors. I have not played with cpu voltage...yet.

Been playing with the GPU today, this 7770 does not like a lot of OC. I've read that some are getting 1250 core and 1300 mem. Best I can do so far is 1125/1275 and that's with a +10% voltage. Upping the voltage brought the temps dowm. I would push 80C with FurMark and now it's 72-73C with the same fan profile.
you would probably need a moded bios for that I moded my 2x 7970's to Ghz ed
My System SpecsSystem Spec
20 May 2013   #5
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

My System SpecsSystem Spec
20 May 2013   #6
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by Britton30 View Post
That is what I was wondering is that what he was trying to do ?

drop it to 1600 or even go from default 1333 MHz and go up it will still be about the same gains
My System SpecsSystem Spec
21 May 2013   #7
madcratebuilder

Win8/8.1,Win7-U64, Vista U64, uncounted Linux distor's
 
 

Quote   Quote: Originally Posted by Britton30 View Post

Thanks for that link Britten. Currently I have the 16mg (4X4) OC'd to 848X2, or 1696. This OC has been stable through several torture tests this past week. I'll keep working at this, I want to see the rated 1866 with all 4 sticks installed.

When the memory settings in BIOS are set to default is when I have the expected 1866 with 2 sticks and 1366 with 4 sticks.

Question about the GPU, when I upped the voltage 10% I saw a reduction on full load operating temps, is this normal?
My System SpecsSystem Spec
21 May 2013   #8
bassfisher6522

Windows 7 Ultimate 64 bit
 
 

I have something similar with my DDR2 8 GB RAM 800mhz G-SKill but should run at 1066mhz, do to the same limitation of the CPU and MOBO. What I did was to make sure I had a CPU that could handle that and then OC my RAM in the BIOS using CPU-Z for the timings and voltage. I've been running the RAM at that for the past year. What a difference it made doing so.
My System SpecsSystem Spec
21 May 2013   #9
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by madcratebuilder View Post
Quote   Quote: Originally Posted by Britton30 View Post

Thanks for that link Britten. Currently I have the 16mg (4X4) OC'd to 848X2, or 1696. This OC has been stable through several torture tests this past week. I'll keep working at this, I want to see the rated 1866 with all 4 sticks installed.

When the memory settings in BIOS are set to default is when I have the expected 1866 with 2 sticks and 1366 with 4 sticks.

Question about the GPU, when I upped the voltage 10% I saw a reduction on full load operating temps, is this normal?
Because you overclocked the Gpu it might needed that extra voltage to even out

Also if you really want to get that 1866 going to have to sacrifice some more multiplyer and bring it up fsb
My System SpecsSystem Spec
21 May 2013   #10
madcratebuilder

Win8/8.1,Win7-U64, Vista U64, uncounted Linux distor's
 
 

Quote:
Also if you really want to get that 1866 going to have to sacrifice some more multiplyer and bring it up fsb
That's my next step. As I recall changing the fsb changes several other settings.
My System SpecsSystem Spec
Reply

 AMD overclock advice.




Thread Tools




Similar help and support threads
Thread Forum
How to Overclock the CPU...
I have a Pentium Dual Core CPU with 3 Ghz... Its model name is E5700... I want to overclock it.. how much should overclock it.. I only have the stock Fan.. No extra coolers
PC Custom Builds and Overclocking
Overclock advice wanted: Which first, multiplier or FSB?
Hi all, I managed to resist the lure of Sandy Bridge and Ivy Bridge and remained somewhat content with my Core 2 Duo E8500 (overclocked to 4.2GHz). Lately, however, I become a bit unhappy with my gaming performance and bought a Core 2 Quad Extreme QX9650. Yes, I know that it's "obsolete" but...
PC Custom Builds and Overclocking
Overclock a GTX 660
So I've be looking at Nvidia Inspector and was thinking of trying some OCing on my card. Does anyone here have experience on ocing a vid card. I'm looking at bumping it up a little, but wondered if it would be worth it. If so should I increase just the base clock at first, or the base clock and...
PC Custom Builds and Overclocking
GTS 450 overclock
hi, I have a PNY GTS 450 (XLR8) with 1 GB 128bit-GDDR5 memory. Standard clocks are: - GPU: 783 MHz - Memory: 902 MHz - Shader: 1566 MHz I'm going to overclock it, and i want to reach the maximum frequency i can.
PC Custom Builds and Overclocking
I7 overclock help
hi i have just overclocked to 4GHz with 1.35625 volts question is whether it is too large for a D0 or is it normal? i have even tried 1.3875 and without bsod.Qpi: one is now at 2.8 ghz you should increase or decrease the QPI: one for better stability? Have max temp 75 degrees sounds like a lot? I...
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:24.
Twitter Facebook Google+