I just replaced a FX4170 with a FX8350. FSB is at 212 with a 21.5 multiplier giving me 4.558ghz. Anything higher and I get a BSOD from ntoskkl.exe.
2 hrs of P95 and I do not go over 56C with the cpu, that's with the fans and water pump really slow.
How much voltage do you guys with 8350's run? According to HWinfo all 8 cores are at 1.313v running P95 torture test.
Ok there are a lot of settings involved with this not just voltage
you are running water cooled and getting 56c @ 4.55 ghz that is wow either you need to change the fans to Corsairs sp fans or your going to have issues with heat
Normal voltage for 4.5 ghz is at least 1.45 v-core and if you are at 1.33 then you have tons of work to do
A change of fan profile, 900rpm to 1200rpm has brought cpu temps down to 47C maximum observed after three hours of P95.getting 56c @ 4.55 ghz that is wow either you need to change the fans to Corsairs sp fans or your going to have issues with heat
Apparently I still have a bios setting allowing the cpu to throttle. I've disabled "Cool&Quiet", "C1E Support" and "Core C6 State".Normal voltage for 4.5 ghz is at least 1.45 v-core and if you are at 1.33 then you have tons of work to do
Quote