Official Seven Forums Overclock Leader boards

I was only joking, Dude.

essenbe said:

I was only joking, Dude.

I know, I just want you to get 5.4, so the leader boards will keep climbing

AddRAM said:

Well, I installed the cooler, was a bit involved so I took my time while watching football. Everything seems to be functioning but the software. It`s giving me the usb error, but I also have an issue in Device Manager and I`m not finding diddly squat on the Thermaltake site, and no help from windows update. And the plug that goes to the cpu fan header is only a 3 pin, shouldn`t it be a 4 pin ?

You can stick a 3 pin into a 4 pin that could be the error some pc's like to have the CPU fan attached to the cooler some don't ,I use the 4 pin couldn't hurt

@Steve The Force is strong with you and your new chip

Dude said:

I seem to remember that you need a driver or firmware update.

Amazing the driver`s not on the cd

AddRAM said:

Dude said:

I seem to remember that you need a driver or firmware update.

Amazing the driver`s not on the cd

It should be every cooler I had used since the H80i debacle had a CD with drivers

Solarstarshines said:

AddRAM said:

Well, I installed the cooler, was a bit involved so I took my time while watching football. Everything seems to be functioning but the software. It`s giving me the usb error, but I also have an issue in Device Manager and I`m not finding diddly squat on the Thermaltake site, and no help from windows update. And the plug that goes to the cpu fan header is only a 3 pin, shouldn`t it be a 4 pin ?

You can stick a 3 pin into a 4 pin that could be the error some pc's like to have the CPU fan attached to the cooler some don't ,I use the 4 pin couldn't hurt

@Steve The Force is strong with you and your new chip

Yep, the Hyper N520 has a 4 pin plug, this thing has a 3 pin, makes no sense to me.

If I can find this driver I need I can get the pump turning faster.

This is insane

AddRAM said:

Solarstarshines said:

AddRAM said:

Well, I installed the cooler, was a bit involved so I took my time while watching football. Everything seems to be functioning but the software. It`s giving me the usb error, but I also have an issue in Device Manager and I`m not finding diddly squat on the Thermaltake site, and no help from windows update. And the plug that goes to the cpu fan header is only a 3 pin, shouldn`t it be a 4 pin ?

You can stick a 3 pin into a 4 pin that could be the error some pc's like to have the CPU fan attached to the cooler some don't ,I use the 4 pin couldn't hurt

@Steve The Force is strong with you and your new chip

Yep, the Hyper N520 has a 4 pin plug, this thing has a 3 pin, makes no sense to me.

If I can find this driver I need I can get the pump turning faster.

This is insane

Just stick it in like you would a 4 pin just used the header to position and drop you will just see that one naked pin but it's really unnoticable

That`s where it is, but without that 4th pin I can`t even control the pump with my MSI control center software.

I sent an email to Thermaltake, I won`t hold my breath.

AddRam, did you try this?
Installation Thermaltake - Global - Water 2.0 Extreme - CLW0217

Driver and Software Thermaltake - Global - Water 2.0 Extreme - CLW0217

Yes, that is the same software that`s on the cd that came with it, it`s asking for another driver. From what I can find it`s got something to do with Antec.