New
#471
With a few more tweaks, made it to 4.9GHz ("4899.91 MHz," as validated). :)
http://valid.canardpc.com/2893781
With a few more tweaks, made it to 4.9GHz ("4899.91 MHz," as validated). :)
http://valid.canardpc.com/2893781
Wow, looks like I have a little updating to do on the leaderboards.
Very nice OC Alan at fantastic volts.
Great work Wrend, that is one excellent OC!
I will update the leaderboards a little later on when I get a few mins.
Paul.
Thanks, Paul. I might be having a little too much fun with this...
At least now I have a legitimate 8th place instead of getting it by margins.
Leaderboards updated.
@Alan, you are supposed to Validate your speed as stated in the first post of this thread, but seeing as you are a long standing and respected member then I have put you in any way. :)
Congrats Wrend!
Yes i saw that!
Now all is set to manual in AI Tweaker tab
Started at Cpu Voltage 1.23v.
Set in Bios, Cpu Load line calibration to "Ultra High", And Cpu Capability to "130%", VRM Fixed Frequency Mode to "250KHz", Cpu Power Thermal Control to "130°C". DRAM Voltage Frequençy at 350KHz.
In the Digit+ Power Control, CPU & DRAM Power Phase Control are on "Extreme". Kept the T.Probe module!
A quick IBT gives,
Max:
Core #0: 67°
Core #1: 78°
Core #2: 74°
Core #3: 69°
I'm gonna lower til it reach 1.16v [edited] if its stays stable.
If i understand right, when set to Manual the CE State should be kept to Enable, and when on Offset Mode +, it should be set to Disable. Is preventing BSOD during high loads, right?
PS: My results can be moved if i'm posting in the wrong forum section!
Last edited by NoN; 20 Aug 2013 at 06:18. Reason: adding pics and infos