Official Seven Forums Overclock Leader boards

Solarstarshines said:

Well it seems i should just roll with Big Brother here seeing he does better then the water 2.0 Antec Kuhler H2O 920 Water Cooling System 77086 - Micro Center

Yep i can roll with Big Brother the SP120 HP's I have hit 2,350 rpm so yup that is it


CFM is 110 no wonder Paul hits super numbers

Sorted!
I hope it serve's you well mate

110 thats proper high

On rads, it is not how many CFM a fan puts out, it's how much pressure it builds up. It takes pressure to push the air through the rad. A lower CFM fan with higher static pressure will do better. I know on OCN one of the more popular fans there is the Scythe Gentle Typhoon AP-15, they spin at 1850 RPMs but only put out 58CFM, but supposedly have high static pressure.

essenbe said:

On rads, it is not how many CFM a fan puts out, it's how much pressure it builds up. It takes pressure to push the air through the rad. A lower CFM fan with higher static pressure will do better.

Yup! I always get the abreviation's mixed up and meant static preasure.

Here is a post from OCN talking about the same thing, fans, CFM, and static pressure (mmH2O).

essenbe said:

Here is a post from OCN talking about the same thing, fans, CFM, and static pressure (mmH2O).

Good info chap
I used a Cougar Vortex as an exhaust in my Carbide 500r and did a pretty poor job of it. So i wouldn't recomend them as case fans.

ganjiry said:

Dude said:

I'm going ASUS on the MB and still wavering on the cooler, I think it will be the H100i but haven't verified it will fit in my case. I have the right fan slots up top but still need to check the clearance down towards the board. I want a sabertooth but am considering this MB ASUS P8Z77-M PRO LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard - Newegg.com as it's a little less expensive. What do you think of that MB?

Ere ya go mate H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings) This list shows all case's the H series coolers are compatible with aswell as links to the mod's needed if it doesn't fit.

:

Nice link, thanks!

Dude said:

I'm going ASUS on the MB and still wavering on the cooler, I think it will be the H100i but haven't verified it will fit in my case. I have the right fan slots up top but still need to check the clearance down towards the board. I want a sabertooth but am considering this MB ASUS P8Z77-M PRO LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard - Newegg.com as it's a little less expensive. What do you think of that MB?

Dude, did I miss this post? Personally, I'd pay the extra money for the Sabertooth. The Sabertooth, you know is a great board. The Z77-M Pro has almost as many 1 and 2 star ratings as 4 and 5 star ratings. Not good. Personally, I wouldn't go there. And Newegg has gotten real hard on their motherboard returns. I buy all my boards from Amazon. They have the best customer service there is, no questions asked. Plus, they pay for shipping both ways if it has to be returned.

Dude said:

Nice link, thanks!

No probs chap

essenbe said:

Dude said:

I'm going ASUS on the MB and still wavering on the cooler, I think it will be the H100i but haven't verified it will fit in my case. I have the right fan slots up top but still need to check the clearance down towards the board. I want a sabertooth but am considering this MB ASUS P8Z77-M PRO LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard - Newegg.com as it's a little less expensive. What do you think of that MB?

Dude, did I miss this post? Personally, I'd pay the extra money for the Sabertooth. The Sabertooth, you know is a great board. The Z77-M Pro has almost as many 1 and 2 star ratings as 4 and 5 star ratings. Not good. Personally, I wouldn't go there. And Newegg has gotten real hard on their motherboard returns. I buy all my boards from Amazon. They have the best customer service there is, no questions asked. Plus, they pay for shipping both ways if it has to be returned.

thanks for the info

No problem, Dude. Just my opinion.