Official Seven Forums Overclock Leader boards

Britton30 said:

Well I took the plunge and delidded a 3770K and lapped the IHS. this is the one I used to clock to 52xx. No damage to the die, looks good.

Attachment 287325

That's pretty neat job!:)

Are you just put some tim paste then use the cooler to hold it?

Britton30 said:

Well I took the plunge and delidded a 3770K and lapped the IHS. this is the one I used to clock to 52xx. No damage to the die, looks good.

Attachment 287325

Gary, you crazy bastid lol. I look forward to seeing your results.

N00berG00ber said:

Dude said:

I missed that conversation did you order all new parts noob?

you calling me a n00b!?!?!

ha no, i was having stuttering problems in all games, and finally came to a conclusion that its either my mobo, gpu, or psu. i tested to make sure all components were getting power, then i realized my NB was INCREDIBLY hot to where i couldn't touch it. so i sent my mobo back. took about 3 weeks to get it back, and it was still getiing REALLY hot, so i sent it back again along with my gpu. its been about 3 weeks, and its going to ship by end of this week. i should get it back by next week. the 4th week on the same RMA! but anyway, thanks to Solar for helping me figure it all out.

I look forward to seeing your OC Noob I can see why Doug called you that, come on it's the first 4 letters of your username!

NoN said:

Britton30 said:

Well I took the plunge and delidded a 3770K and lapped the IHS. this is the one I used to clock to 52xx. No damage to the die, looks good.

Attachment 287325

That's pretty neat job!:)

Are you just put some tim paste then use the cooler to hold it?

The socket retainer will hold it together.

paulpicks21 said:

Britton30 said:

Well I took the plunge and delidded a 3770K and lapped the IHS. this is the one I used to clock to 52xx. No damage to the die, looks good.

Attachment 287325

Gary, you crazy bastid lol. I look forward to seeing your results.

Guilty as charged yer honor.

paulpicks21 said:

N00berG00ber said:

Dude said:

I missed that conversation did you order all new parts noob?

you calling me a n00b!?!?!

ha no, i was having stuttering problems in all games, and finally came to a conclusion that its either my mobo, gpu, or psu. i tested to make sure all components were getting power, then i realized my NB was INCREDIBLY hot to where i couldn't touch it. so i sent my mobo back. took about 3 weeks to get it back, and it was still getiing REALLY hot, so i sent it back again along with my gpu. its been about 3 weeks, and its going to ship by end of this week. i should get it back by next week. the 4th week on the same RMA! but anyway, thanks to Solar for helping me figure it all out.

I look forward to seeing your OC Noob I can see why Doug called you that, come on it's the first 4 letters of your username!

HEY!

lol i know. just messin.

i just cant wait to get my PC back together. its been like 2 months total....
i really hate asus support!

Britton30 said:

NoN said:

Britton30 said:

Well I took the plunge and delidded a 3770K and lapped the IHS. this is the one I used to clock to 52xx. No damage to the die, looks good.

Attachment 287325

That's pretty neat job!:)

Are you just put some tim paste then use the cooler to hold it?

The socket retainer will hold it together.

paulpicks21 said:

Britton30 said:

Well I took the plunge and delidded a 3770K and lapped the IHS. this is the one I used to clock to 52xx. No damage to the die, looks good.

Attachment 287325

Gary, you crazy bastid lol. I look forward to seeing your results.

Guilty as charged yer honor.

In theory you should see temps 20C lower and as a result should be able to clock higher, but time will tell how high you can go. Steve set a massive target.

N00berG00ber said:

paulpicks21 said:

N00berG00ber said:

you calling me a n00b!?!?!

ha no, i was having stuttering problems in all games, and finally came to a conclusion that its either my mobo, gpu, or psu. i tested to make sure all components were getting power, then i realized my NB was INCREDIBLY hot to where i couldn't touch it. so i sent my mobo back. took about 3 weeks to get it back, and it was still getiing REALLY hot, so i sent it back again along with my gpu. its been about 3 weeks, and its going to ship by end of this week. i should get it back by next week. the 4th week on the same RMA! but anyway, thanks to Solar for helping me figure it all out.

I look forward to seeing your OC Noob I can see why Doug called you that, come on it's the first 4 letters of your username!

HEY!

lol i know. just messin.

i just cant wait to get my PC back together. its been like 2 months total....
i really hate asus support!

That is a long time to be without a main rig, I bet you can't wait. So you recon you will be back up and running by the end of the week?

N00berG00ber said:

paulpicks21 said:

N00berG00ber said:

welp, got my GPU back, and my mobo is about to ship.... LOOK OUT PPL!

Good news mate, I am sure you will be at the top with a 5.6GHz overclock in no time haha.

lol not pushing that hard!
but that would be cool!

That's not pushing that is just nudging

paulpicks21 said:

N00berG00ber said:

paulpicks21 said:

I look forward to seeing your OC Noob I can see why Doug called you that, come on it's the first 4 letters of your username!

HEY!

lol i know. just messin.

i just cant wait to get my PC back together. its been like 2 months total....
i really hate asus support!

That is a long time to be without a main rig, I bet you can't wait. So you recon you will be back up and running by the end of the week?

by the end of next week. but hell ive taken appart and put back my PC SO many times by now that it only takes me 10 mins... kinda sad actually lol. but yea i really cant wait to play BF3 and some new games i got

atleast now i will have a perfect rig. no more stuttering and ill get the full performance of my gtx 660

[QUOTE=Britton30;2543679]

NoN said:

Britton30 said:

Well I took the plunge and delidded a 3770K and lapped the IHS. this is the one I used to clock to 52xx. No damage to the die, looks good.

Attachment 287325

That's pretty neat job!:)

Are you just put some tim paste then use the cooler to hold it?

The socket retainer will hold it together.

I found that product....

Gasketing of cooling channels, radiator cover and soils, for repairing etc.

Especially when it comes to craft fans again and again: the seal is not seated properly or it has a small Macke and therefore no longer seals properly. Remedy is now done! Simply apply this surface seal at the desired location and let harden. Waterproof, can withstand temperature variations from -50 to 180 ° C and bridged seal height differences of up to half a millimeter.

Some will say what's the point delidding then re-gluing it, but i was wondering since this trick came over on Ivy Bridges if applying a thin coat of this product will not interfere with the Tim paste and height of the Core to the IHS.

I mean not that 0,5mm thick but very very thin coat.