CPU Temps way to high please help

Page 1 of 6 123 ... LastLast

  1. Posts : 26
    Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
       #1

    CPU Temps way to high please help


    Hello, so randomly yesterday my cpu temps jumped to around 90c min and 90c max (way to high for what i have read) and that's at idle,

    My pc:

    Windows 7 64-bit

    CPU: Amd phenom(tm) II X4 955 Processor (4 CPUs), ~2.1GHz

    GFX: 2 Amd radeon 6850's running through crossfire

    8 gigs of ram

    Motherboard: GA-870A-USB3

    ----------------------------------

    This has happened to me once before a long time ago, i noticed it happening again when all my games starting getting really low fps and all chopy etc, i forget how i managed to fix it last time, but i know that it was something running in the background or something just cant remember what it was please if any of you guys/gals know what i could try to do that would really help me out!

    Thanks,
    Vaas
      My Computer


  2. Posts : 85
    Windows 7 Home Premium 64bit
       #2

    First thing is how are you checking your temps? I recommend installing SpeedFan, use it to check all your computers temps, CPU useage, and if supported fan speeds. If it shows that your CPU temp is still high and the CPU is being heavily used then investigate what is hogging it, otherwise check your fans to make sure they're spinning, and that your heatsinks are clean.
      My Computer


  3. Posts : 25,847
    Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
       #3

    The first thing the good folks here need you to do is this Tutorial.
    By Brink.
    System Info - See Your System Specs

    Tick on My System Specs lower left corner of this post and you will see what I mean.
      My Computer


  4. Posts : 26
    Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
    Thread Starter
       #4

    herqulees said:
    First thing is how are you checking your temps? I recommend installing SpeedFan, use it to check all your computers temps, CPU useage, and if supported fan speeds. If it shows that your CPU temp is still high and the CPU is being heavily used then investigate what is hogging it, otherwise check your fans to make sure they're spinning, and that your heatsinks are clean.
    speedfan says 4 of my things are really high i guess? im not sure what else i should see ( T.T ) so what can i do to find out what is hogging it?
    also my fan is spinning just fine as always ( i have water cooling)

    Thanks alot for the reply!
    Vaas
      My Computer


  5. Posts : 26
    Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
    Thread Starter
       #5

    Layback Bear said:
    The first thing the good folks here need you to do is this Tutorial.
    By Brink.
    System Info - See Your System Specs

    Tick on My System Specs lower left corner of this post and you will see what I mean.
    Done
      My Computer


  6. Posts : 85
    Windows 7 Home Premium 64bit
       #6

    Vaas said:
    herqulees said:
    First thing is how are you checking your temps? I recommend installing SpeedFan, use it to check all your computers temps, CPU useage, and if supported fan speeds. If it shows that your CPU temp is still high and the CPU is being heavily used then investigate what is hogging it, otherwise check your fans to make sure they're spinning, and that your heatsinks are clean.
    speedfan says 4 of my things are really high i guess? im not sure what else i should see ( T.T ) so what can i do to find out what is hogging it?
    also my fan is spinning just fine as always ( i have water cooling)

    Thanks alot for the reply!
    Vaas
    Your CPU is completely idle so nothing Windows is doing/running is at fault. If you use water cooling and the radiator fan is running fine then the next two things to check are your coolant level and that the cooling pump is pumping. Along with can't forget is make sure it is properly attached to the CPU.
    EDIT: Also just to note, although right this time, generally it is safe to ignore the little flame icon, SpeedFan has way too low of a warning temp (50C I think?) and warns you too soon usually. So your CPU (Core) is very hot but still in an acceptable short term temperature range, I believe 95 or 100C is the max for that CPU before it shuts itself off. Also whatever Temp2 and Temp3 are are pretty hot too. But your GPU is acceptable despite the flame icon.
    Last edited by herqulees; 06 Aug 2013 at 21:17.
      My Computer


  7. Posts : 25,847
    Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
       #7
      My Computer


  8. Posts : 85
    Windows 7 Home Premium 64bit
       #8

    Layback Bear said:
    I never liked the interface but do have to say it tends to understand more about the hardware than SpeedFan, possibly capable of locating those two temp sensors, which I imagine will be the northbridge as it usually relies on an air cooled CPU to blow air over it.
      My Computer


  9. Posts : 26
    Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
    Thread Starter
       #9

    This is what i see when i open HWMoniter Let me know if im supposed to be looking at a dif tab or w.e

    @Herqulees my water cooling is attached to the cpu fine, the fan is spinning perfect, and i can hear the water pumping as always so i don't think there's anything wrong with it (i might be wrong tho)

    thanks so much for the replys guys, means alot!
    Vaas
      My Computer


  10. Posts : 85
    Windows 7 Home Premium 64bit
       #10

    Vaas said:
    This is what i see when i open HWMoniter Let me know if im supposed to be looking at a dif tab or w.e

    @Herqulees my water cooling is attached to the cpu fine, the fan is spinning perfect, and i can hear the water pumping as always so i don't think there's anything wrong with it (i might be wrong tho)

    thanks so much for the replys guys, means alot!
    Vaas
    How about the air coming out of the radiator? Is it cool, warm, very hot? Have you done anything in the BIOS to disable the CPUs power saving features? You have almost the same CPU I had on an old gaming build of mine (AMD Phenom II X4 965 Black Edition @3.4GHz) and when I disabled the power saving features in BIOS the temps skyrocketed. From an idle of 25-30C to 55-65C after it was running for awhile.
    EDIT: It's called AMD Cool and Quiet and was listed in my BIOS as CPU Phase Control.
    Last edited by herqulees; 06 Aug 2013 at 21:17.
      My Computer


 
Page 1 of 6 123 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:53.
Find Us