Official Seven Forums Overclock Leader boards [2]

Good luck Non

Thanks guys,

We have an old saying here and is a bit sarcastic one, though: "good luck for the future" that means you're gonna have a real tough time for the next step!!

Well, i am prepared to it and will delid as soon i got the right tools!

Good luck NoN........keep us updated!

Going to be doing some RAM Overclocking later, any tips?

As per title, i have successfully delidded my Core i5 3570K with the Razor blade method...

I am giving you here, the screenshots taken during that "Hot Delidding Session" between 18h00 PM to 20h30 PM today (here).

The pictures are talking by themselves....

About the "Temps" i guess its just too early as the Thermal Compound is freshly applied, but if you want Core Temp shot, tell me. Anyway, i have still seven/eight degrees from Core #3 to Core #1 at idle load, but i do suspect its me with the Tim Paste "onto" the IHS or "into" the IHS...

I've to check that later, i'm not gonna unmount the CPU until tomorrow evening, now.

Your braver then me :)

HarriePateman said:

Your braver then me :)

As i would not recommend it, now that i have done that delidding, how scary was to start at it!!

Edit:
Screenshot of Core Temp 1.0 RC6 with that delidded core.

Forgot to mention, Delta room is 24°C today compare to previous undelidded nearly same results with delta room 19°C...

That's impressive :)

Worth doing to my G3420?

Great job NoN. Also great results.
How long did it take you?

HarriePateman said:

That's impressive :)

Worth doing to my G3420?

For the G3420 have a look here at some shots: CPU: Intel G3258 Performance and Delid thread! Way to Go!