Official Seven Forums Overclock Leader boards [2]


  1. NoN
    Posts : 4,167
    Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
       #1201

    NoN said:
    essenbe said:
    Nice job, NoN.
    Thanks!

    A day ago I have ran IBT @4.4GHz and a delta room of 22C..Results were pretty encouraging and compare to today's delta is significant ratio.

    One thing I do not fully understand is about "Cool Laboratory Pro/Ultra" Tim...

    I went through a lot of reading at OCNet Delidded Club. Why some have their liquid dried up after fews months only on Die with their nickel plated IHS and some stays liquid for even a year??

    If I ever use that one I want to be sure I can remove the IHS wihtout chipping the Die glass!!!!!
    I kept my promise and i'm quoting myself after a month having said i will post new IBT results with a better Thermal Paste, which i did today by changing both the Delidded i5 "K" CPU and my Graphics Card.

    Wasn't enough confident with the CLP or CLU on Die so took a very good non conductive one at 16W/Mk actual for both In & Out. Previous T.Paste was a 8,5W/Mk.

    Kept @4.4GHz, Delta room 20C/21C.
    I'm doing on the right time as its no winter time yet and my Delta room is are pretty like last month and the results were reaching 67C at max Temps.

    I stayed under the 60C...(58C)!!!

    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-capture.png   Official Seven Forums Overclock Leader boards [2]-capture2.png  
      My Computer


  2. Posts : 1,486
    Windows 10 Pro
       #1202

    Those are nice temps! I'm getting about 75 on IBT 4.4ghz 1.178v on h80i
      My Computer


  3. NoN
    Posts : 4,167
    Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
       #1203

    Thanks N00ber,

    That's exactly the Temps i was expecting when i delidded my Core. Previous were so high before, i even reached 105C TJM on my last valided overclock @4.9GHz.

    I have an average of 10C minus gain since, with this new T.Paste!!

    I might try at later date when the Thermal paste will have cure itself and if i can get around 90C @4.9ghz, i might try to beat my score @5.0GHz!
      My Computer


  4. Posts : 1,486
    Windows 10 Pro
       #1204

    NoN said:
    Thanks N00ber,

    That's exactly the Temps i was expecting when i delidded my Core. Previous were so high before, i even reached 105C TJM on my last valided overclock @4.9GHz.

    I have an average of 10C minus gain since, with this new T.Paste!!

    I might try at later date when the Thermal paste will have cure itself and if i can get around 90C @4.9ghz, i might try to beat my score @5.0GHz!
    nice man! u got me curious....

    Heres my 4.4GHz :)
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-capture.jpg  
      My Computer


  5. NoN
    Posts : 4,167
    Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
       #1205

    I found some @4.4GHz (less vCore) results back in October 04, 2013 made at the same weather & nearly same condition...with the Undelidded Core!

    Highest were 63C to 71C...pretty much gained, now!

    AH, N00ber! I dare you doing it again...remember your post #1162 and stay on the safe side!!!
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-capture1.png  
      My Computer


  6. Posts : 1,486
    Windows 10 Pro
       #1206

    NoN said:
    I found some @4.4GHz (less vCore) results back in October 04, 2013 made at the same weather & nearly same condition...with the Undelidded Core!

    Highest were 63C to 71C...pretty much gained, now!

    AH! I dare you doing it again...remember your post #1162 and stay on the safe side!!!

    Yea, why r u using such a high voltage for 4.4? Also is that result under your custom loop?

    Edit: nope. Won't do it. After my new GPU comes in, I'm calling my PC "perfect" and I'm not touching anything more.
      My Computer


  7. NoN
    Posts : 4,167
    Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
       #1207

    No, the 2013 results were with an AirCooler 120mm in Push/Pull, was a good one, though!

    Well i'm using such actual high vCore because my Razer keyboard driver that is at shame past under 1.224V and keep BSOD once in a while, also have a lot plug onto the motherboard so i try to keep on the safe side between 1.224 to pick 1.24V. I have to change for another brand sooner or later.
      My Computer


  8. Posts : 5,915
    Windows 10 Pro X64
       #1208

    Looking good with the temps, here is mine, ran it at 4.5 but forgot cpuz for the ss

    Official Seven Forums Overclock Leader boards [2]-ibt.png
      My Computer


  9. NoN
    Posts : 4,167
    Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
       #1209

    Dude said:
    Looking good with the temps, here is mine, ran it at 4.5 but forgot cpuz for the ss

    Official Seven Forums Overclock Leader boards [2]-ibt.png
    With that Antec Kuhler 920 ?

    Your i5 K Core looks better than was mine before, or?...Three of your cores are pretty close Temps but its no autumn time where you are, yet.
      My Computer


  10. Posts : 5,915
    Windows 10 Pro X64
       #1210

    Yep, Antec 920. Your temps are amazing with the delid, but I still don't have the nerve to try it.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 18:41.
Find Us