A day ago I have ran IBT @4.4GHz and a delta room of 22°C..Results were pretty encouraging and compare to today's delta is significant ratio.
One thing I do not fully understand is about "Cool Laboratory Pro/Ultra" Tim...
I went through a lot of reading at OCNet Delidded Club. Why some have their liquid dried up after fews months only on Die with their nickel plated IHS and some stays liquid for even a year??
If I ever use that one I want to be sure I can remove the IHS wihtout chipping the Die glass!!!!!
I kept my promise and i'm quoting myself after a month having said i will post new IBT results with a better Thermal Paste, which i did today by changing both the Delidded i5 "K" CPU and my Graphics Card.
Wasn't enough confident with the CLP or CLU on Die so took a very good non conductive one at 16W/Mk actual for both In & Out. Previous T.Paste was a 8,5W/Mk.
Kept @4.4GHz, Delta room 20°C/21°C.
I'm doing on the right time as its no winter time yet and my Delta room is are pretty like last month and the results were reaching 67°C at max Temps.
That's exactly the Temps i was expecting when i delidded my Core. Previous were so high before, i even reached 105°C TJM on my last valided overclock @4.9GHz.
I have an average of 10°C minus gain since, with this new T.Paste!!
I might try at later date when the Thermal paste will have cure itself and if i can get around 90°C @4.9ghz, i might try to beat my score @5.0GHz!
That's exactly the Temps i was expecting when i delidded my Core. Previous were so high before, i even reached 105°C TJM on my last valided overclock @4.9GHz.
I have an average of 10°C minus gain since, with this new T.Paste!!
I might try at later date when the Thermal paste will have cure itself and if i can get around 90°C @4.9ghz, i might try to beat my score @5.0GHz!
No, the 2013 results were with an AirCooler 120mm in Push/Pull, was a good one, though!
Well i'm using such actual high vCore because my Razer keyboard driver that is at shame past under 1.224V and keep BSOD once in a while, also have a lot plug onto the motherboard so i try to keep on the safe side between 1.224 to pick 1.24V. I have to change for another brand sooner or later.
The Official Seven Forums Overclock Leaderboards
After some discussions between several members, I have created a new leaderboards thread. Obviously there is still the https://www.sevenforums.com/pc-custom-builds-overclocking/251850-post-your-overclock-2-a-73.html thread, but I thought it would...