Official Seven Forums Overclock Leader boards [2]

Page 29 of 129 FirstFirst ... 19272829303139 ... LastLast

  1. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #281

    Dude said:
    Will it run 5 passes of IBT without error?
    Yeah it will do that on Standard.
    essenbe said:
    Gary set LLC to Ultra High. See if that makes a difference. Also, read this and set your BIOS exactly like it is except the ram settings and voltage, but leave the CPU Voltage to manual and try again. Ivy Bridge Overclocking Guide ? Asus Motherboards# One problem you have is your VID is very high, which you can't change.
    This is the Sandy chip, but will give it a shot later on.
      My Computer


  2. Posts : 5,915
    Windows 10 Pro X64
       #282

    essenbe said:
    Gary set LLC to Ultra High. See if that makes a difference. Also, read this and set your BIOS exactly like it is except the ram settings and voltage, but leave the CPU Voltage to manual and try again. Ivy Bridge Overclocking Guide ? Asus Motherboards# One problem you have is your VID is very high, which you can't change.
    That is a very good guide. I was reading it, and something stuck out, in the prime settings

    I use Prime95 and I have never had a problem afterwards. When using Prime95, use Custom Blend meaning, select Blend first and then press Custom. After that, change the RAM amount to 90% of available RAM.
    It defaults to 100 percent which can be to much. Thats what I think might cause workers to error, I could be wrong though
      My Computer


  3. Posts : 26,567
    Windows 11 Pro
       #283

    Britton30 said:
    Dude said:
    Will it run 5 passes of IBT without error?
    Yeah it will do that on Standard.
    essenbe said:
    Gary set LLC to Ultra High. See if that makes a difference. Also, read this and set your BIOS exactly like it is except the ram settings and voltage, but leave the CPU Voltage to manual and try again. Ivy Bridge Overclocking Guide ? Asus Motherboards# One problem you have is your VID is very high, which you can't change.
    This is the Sandy chip, but will give it a shot later on.
    Gary, you said it was the Ivy chip, not that it makes a lot of difference, but change the LLC, that's too high.

    I can't get Prime to run on the i7-3770K system, workers stop after a few minutes. I've got it only at 4636MHz and Vcore up to 1.364V.
      My Computer


  4. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #284

    Sorry, I'm fiddling with both chips. The settings I have mentioned were for the Sandy though.
      My Computer


  5. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #285

    Another request to overclocking team to guide another noob
    BSOD when running CPU-Z or HardwareMonitor after overclocking
      My Computer


  6. Posts : 6,077
    Windows 7 Professional 64 bit
    Thread Starter
       #286

    Britton30 said:
    How hot does the new CPU get Tom Paul? I ran this i5-2550K to 100C once and now, while it works OK, it won't run at over 4.6 stable. Prime shuts down 2-3 core within a minute. It's running with a Vcore of 1.464V.
    Sorry Gary I forgot to reply to this, well it gets to 71C at 4.6GHz after 10 passes of IBT. I guess that's not bad.
      My Computer


  7. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #287

    paulpicks21 said:
    Britton30 said:
    How hot does the new CPU get Tom Paul? I ran this i5-2550K to 100C once and now, while it works OK, it won't run at over 4.6 stable. Prime shuts down 2-3 core within a minute. It's running with a Vcore of 1.464V.
    Sorry Gary I forgot to reply to this, well it gets to 71C at 4.6GHz after 10 passes of IBT. I guess that's not bad.
    No, that's cool in an unheated cabin.
    Mine gets to 86C at 4700, 5 passes.
      My Computer


  8. Posts : 6,077
    Windows 7 Professional 64 bit
    Thread Starter
       #288

    Britton30 said:
    paulpicks21 said:
    Britton30 said:
    How hot does the new CPU get Tom Paul? I ran this i5-2550K to 100C once and now, while it works OK, it won't run at over 4.6 stable. Prime shuts down 2-3 core within a minute. It's running with a Vcore of 1.464V.
    Sorry Gary I forgot to reply to this, well it gets to 71C at 4.6GHz after 10 passes of IBT. I guess that's not bad.
    No, that's cool in an unheated cabin.
    Mine gets to 86C at 4700, 5 passes.
    It's pretty mild at the moment for the time of year, it's 11PM at mid 60s F. Let me run it again on a cold winters morning
      My Computer


  9. Posts : 6,077
    Windows 7 Professional 64 bit
    Thread Starter
       #289

    Actually I did post a screenie Gary when I had just installed the latest 3770k

    Official Seven Forums Overclock Leader boards [2]
      My Computer


  10. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #290

    Thanks. Man I need 1.340V or so at 4500. Or that's what it runs anyway.
      My Computer


 
Page 29 of 129 FirstFirst ... 19272829303139 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:16.
Find Us