Official Seven Forums Overclock Leader boards [2]

Page 63 of 129 FirstFirst ... 53616263646573 ... LastLast

  1. Posts : 2,973
    Windows 7 Professional 64bit SP1
       #621

    I was stuck at 4.9xxGHz for a few months before I finally got above 5.0GHz........but I finally did it. I was only using the BIOS and I was happy that I broke 5GHz so that's where I stopped.
      My Computer


  2. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #622

    Ralph you might try raising the FSB and lowering the RAM frequency some. If possible try getting the QPI link closer to 2000.
      My Computer


  3. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #623

    crankypenguin said:
    Almost there guys!
    CPU-Z Validator 4.0
    So close yet so far lol.

    Updated oh cranky one

      My Computer


  4. Posts : 598
    Windows 7 Ultimate x64
       #624

    Ok my motherboard simply wont allow any higher than this. Theoretically this should be a 5 as I set the bus to 200 and multi 20 25x but what can you do? CPU-Z Validator 4.0 Of course I know what you're going to say, move the bus to 201 and you will get 5020, but it wasn't having it, would not boot no matter what. I had the cpu voltage on [+.300] I don't 2 places higher and the numbers turn red I am officially done OCing this chip and this mobo, so you can put this in Paul without worries of me coming back with a higher score. I plan to upgrade my rig in the upcoming months....Christmas...I am an Aquarius so I will save up the money to do it. I am very happy that I was able to push this mobo and cpu this far.
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-capture2.jpg  
      My Computer


  5. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #625

    crankypenguin said:
    Ok my motherboard simply wont allow any higher than this. Theoretically this should be a 5 as I set the bus to 200 and multi 20 25x but what can you do? CPU-Z Validator 4.0 Of course I know what you're going to say, move the bus to 201 and you will get 5020, but it wasn't having it, would not boot no matter what. I had the cpu voltage on [+.300] I don't 2 places higher and the numbers turn red I am officially done OCing this chip and this mobo, so you can put this in Paul without worries of me coming back with a higher score. I plan to upgrade my rig in the upcoming months....Christmas...I am an Aquarius so I will save up the money to do it. I am very happy that I was able to push this mobo and cpu this far.
    Try validating again, it will fluctuate a little on each validation, you might hit 5000 after a couple.
      My Computer


  6. Posts : 598
    Windows 7 Ultimate x64
       #626

    CPU-Z Validator 4.0

    This is my green zone score guys, can someone please remove the above post, I tried editing it but it kept going back to my old score
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-capture.jpg  
      My Computer


  7. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #627

    crankypenguin said:
    CPU-Z Validator 4.0

    This is my green zone score guys, can someone please remove the above post, I tried editing it but it kept going back to my old score
    Holy sheep sh*t you did it! How come it jumped so much? Well done Ralph
      My Computer


  8. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #628

    Congratulations Ralph (if your PC is still alive lol) and welcome to the top 10!

      My Computer


  9. Posts : 598
    Windows 7 Ultimate x64
       #629

    A few weeks ago I read this article and in it, the guy had the same mobo as me and he said to raise the CPU PLL to stabilize. That option is mostly useless for most mobos from what I hear, but on this one, I raised it this last go and ...well It worked.
      My Computer


  10. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #630

    crankypenguin said:
    A few weeks ago I read this article and in it, the guy had the same mobo as me and he said to raise the CPU PLL to stabilize. That option is mostly useless for most mobos from what I hear, but on this one, I raised it this last go and ...well It worked.
    Excellent, well you certainly worked for the 5GHz plus mate and you suddenly went 100MHz higher so fair play. You can sleep happy tonight lol.
      My Computer


 
Page 63 of 129 FirstFirst ... 53616263646573 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:21.
Find Us