Official Seven Forums Overclock Leader boards [2]

Page 44 of 129 FirstFirst ... 34424344454654 ... LastLast

  1. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #431

    I went off topic with the free game thing and Solar has managed to go off topic on the off topic

    @ Steve, I am having one for the road then bed
      My Computer


  2. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #432

    Steve I'm a good Batman see

    I am just Lurking at your local store
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-batman.png  
      My Computer


  3. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #433

    paulpicks21 said:
    I went off topic with the free game thing and Solar has managed to go off topic on the off topic

    @ Steve, I am having one for the road then bed

    I thought it was to make you laugh

    Any who I hope the picture did it that was last year during Christmas

    I have nothing to say as of now about you to make you laugh but I will one day
      My Computer


  4. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #434

    Great pic Solar, suits you sir!
      My Computer


  5. Posts : 26,863
    Windows 11 Pro
       #435

    Don't lurk around my neighborhood Solar.

    Official Seven Forums Overclock Leader boards [2]-we-dont-call-911.jpg
      My Computer


  6. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #436

    Here are the special cards with the codes on, I would have offered the new Splinter Cell too, but I gave it to a friend and I want the other copy for myself, btw the friend has still not told me if it's any good even after me asking him several times.
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-dsc_1389.jpg  
      My Computer


  7. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #437

    Haha I am Batman

    Weapons don't scare me but Alimony does
      My Computer


  8. Posts : 53,363
    Windows 10 Home x64
       #438

    Solarstarshines said:
    Any who I hope the picture did it that was last year during Christmas
    Ahhh, a traditional Christmas at your house then...

    A Guy
      My Computer


  9. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #439

    Solarstarshines said:
    Haha I am Batman

    Weapons don't scare me but Alimony does

    I always thought it was you! You look so similar
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-solar.jpg  
      My Computer


  10. Posts : 21,004
    Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
       #440

    essenbe said:
    ICit2lol said:
    Ok looks like I ought to try it am running an i5 3570K at stock on an Asus P8Z77-V board I have the RAM set at 2400 so where do I go in the EUFI BIOS to ramp the CPU up say to 4GHz? (It's turboed at 3.7 now)
    John, this it the best overclocking guide I know of. Ivy Bridge Overclocking Guide ? Asus Motherboards. Don't worry about the type of board they use. All Asus boards have the same basic overclocking options. Set your board the way they have their board set. You may want to save your current profile in case you want to go back to it. The guide will explain some of the terms in bios and what they do. They're are very few you need to change. Disregard their Dram frequency, voltage and the CPU vcore. You will have to use your own. Just set the timings and Dram voltage and frequency for your ram. You will want all the C states enabled if you set your Vcore to Manual. When you move to offset set the C states to C1 as enabled, C3, C6 and C states Package to disabled. It is very time consuming to set a high overclock, so just be able, but in the end, it will be worth it. Make sure you have Cpre Temp, CPUz and IBT, Prime95 or AIDA64 installed. Just remember when you run them, your core temp will go way up. That's normal. In normal usage you will never see even half those temps. Just try to keep your temps while stress resting to 95C or below. Set your Vcore to manual and set a vcore. I start at 1.250 and run prime for about 30 minutes at a multiplier of 4.5. If you pass, no workers shut down or no BSOD. You can either raise the multiplier or lower the vcore. Keep core temp and cpuz open during that test. Just keep playing with the Vcore and multiplier during those sessions until you find the lowest vcore you can run at the multiplier you want without going over 95. Don't worry, you'll get the hang of it. Post a screenshot of it while prime95 is running. post the screenshot of prime95, CPUz and Coretemp all in 1 screenshot. after setting the bios by that tutorial, set the vcore to manual, the vcore to 1.250 and the multiplier to 45. Save and exit. see if you can boot into windows and run the stress test for 30 minutes. If it runs well, post the screenshot of those 3 programs open. You'll get a lot of help about where to go after the screenshot as well as how to convert back to offset in your bios. If you have questions, just ask. But, always keep a close eye on temps while running the stress test. If they get too high, on Prime95, press file, and stop, yes to the window that will open and the test will stop.
    Sorry late reply Steve have just had a huge batch of this thread replies come though I'll duck in and check out that link.
    At the moment it is running 4.2 and the RAM 2400 and I really don't know what I am supposed to be looking for.
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-core.png  
      My Computer


 
Page 44 of 129 FirstFirst ... 34424344454654 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:19.
Find Us