Official Seven Forums Overclock Leader boards [2]

Page 59 of 129 FirstFirst ... 49575859606169 ... LastLast

  1. Posts : 598
    Windows 7 Ultimate x64
       #581

    I have actually noticed that it might be my PSU that is holding back my green overclock. You see after I make an at·temp at 5 and reboot, first thing I do is go into PC Health Monitor and I notice that my main 12V rail is dipping below 12, like a 11.989. It may just mean I need a stronger PSU, but then again I do have a lot of hard drives in my case ( 8 ) and fans ( 11 ) 6x120mm 2x220mm 2x140mm 1x40mm. It's a 650watt modular, I figured with a 95 watt cpu and my gtx 660 isn't power hungry it wouldn't be an issue.
      My Computer


  2. Posts : 3,118
    Win7 Home Premium x64 SP1
       #582

    crankypenguin said:
    I have actually noticed that it might be my PSU that is holding back my green overclock. You see after I make an at·temp at 5 and reboot, first thing I do is go into PC Health Monitor and I notice that my main 12V rail is dipping below 12, like a 11.989. It may just mean I need a stronger PSU, but then again I do have a lot of hard drives in my case ( 8 ) and fans ( 11 ) 6x120mm 2x220mm 2x140mm 1x40mm. It's a 650watt modular, I figured with a 95 watt cpu and my gtx 660 isn't power hungry it wouldn't be an issue.
    If i remember rightly aslong as your 12v isn't dropping by more than 5% then all is good and yours is just varying slightly like any psu. All psu voltages will vary slightly chap. Here's some more info regarding psu tolerences Power Supply Voltage Tolerances
    5Ghz is really pushing that Fx 6100 mind What issues are you having and what kind of voltage are you trying for the 5GHz?
      My Computer


  3. Posts : 598
    Windows 7 Ultimate x64
       #583

    ganjiry said:
    crankypenguin said:
    I have actually noticed that it might be my PSU that is holding back my green overclock. You see after I make an at·temp at 5 and reboot, first thing I do is go into PC Health Monitor and I notice that my main 12V rail is dipping below 12, like a 11.989. It may just mean I need a stronger PSU, but then again I do have a lot of hard drives in my case ( 8 ) and fans ( 11 ) 6x120mm 2x220mm 2x140mm 1x40mm. It's a 650watt modular, I figured with a 95 watt cpu and my gtx 660 isn't power hungry it wouldn't be an issue.
    If i remember rightly aslong as your 12v isn't dropping by more than 5% then all is good and yours is just varying slightly like any psu. All psu voltages will vary slightly chap. Here's some more info regarding psu tolerences Power Supply Voltage Tolerances
    5Ghz is really pushing that Fx 6100 mind What issues are you having and what kind of voltage are you trying for the 5GHz?
    Ok. I run my rig on a 22x200 , [+0.150V]24/7 , and that is stable with temps around 20C, 25 at load. When I do my OC runs, I raise the voltage up to [+.200]. I can get it stable on that up to around 4.7. I Updated my bios a few days ago and it seems my system became even more stable temps even lower ( checked with with (k type thermocouple). Yesterday when I ran the 4.8 OC I dared to raise the voltage to [+.225] with a multiplier of 24x200. Ran prime, temps never went above 38~39, no workers deserted me. Now I insinuate that If I spike it to [+.250] I might be able to boot into 5ghz~. that is also the issue, if the computer does not like the settings I input, it simply says ....Loading Operating System and it gets stuck with 3 little dots...I assume the beginning of that little butterfly. I am including 3 pics. 1st pic is my 4.4 normal daily use, second pic is what I used to get 4.8( even though it says 1.512 in the bios, you can see on the validation screen it never went above 1.48~) and third pic is what I would like to try to get to 5.

    P.S I Image Googled *FX-6100 5ghz overclock cpu-z* and I saw quite a few validations of it @ 5 with V ar 1.512....they all seemed to have that .512 ending, maybe its the sweet spot for the highest it can do. I am not worried about temps, I have that covered. So what do you think ganjiry? (To be honest, when I bought this chip, I didn't think it would overclock past 3.8-3.9)
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-001.jpg   Official Seven Forums Overclock Leader boards [2]-002.jpg   Official Seven Forums Overclock Leader boards [2]-003.jpg  
      My Computer


  4. Posts : 3,118
    Win7 Home Premium x64 SP1
       #584

    I had a feeling you were using offset voltages and I have no clue about offset overclocking as it's something I'm literally just about to start looking into. So I can't help you in that area. sorry chap. Solar maybe able to help you more in that department.
    If the highest vcore you have seen is 1.48v then I would say it's not enough for 5Ghz and if it's freezing at the Windows logo sound's like too little vcore, the maximum should not exceed 1.55v.
    What are your HT Link and Cpu/Nb frequencies and Cpu/Nb voltage?
    How are you cooling the cpu to see a temp of less than 40c during prime?
      My Computer


  5. Posts : 598
    Windows 7 Ultimate x64
       #585

    ganjiry said:
    I had a feeling you were using offset voltages and I have no clue about offset overclocking as it's something I'm literally just about to start looking into. So I can't help you in that area. sorry chap. Solar maybe able to help you more in that department.
    If the highest vcore you have seen is 1.48v then I would say it's not enough for 5Ghz and if it's freezing at the Windows logo sound's like too little vcore, the maximum should not exceed 1.55v.
    What are your HT Link and Cpu/Nb frequencies and Cpu/Nb voltage?
    How are you cooling the cpu to see a temp of less than 40c during prime?

    I use a thermaltake 2.0 pro, computer next to window, window is open, this is Poland, below freezing outside. Here are some screens that should give you what you asked for. I did OC the FSB way, but my CPU was not as happy as when I do it this way. I spiked it to 4.5 for these screens @ [+.175] When I overclocked to 4.8, the Normal CPU VCORE on the bottom of the last pic was around 1.44~V
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards [2]-001.jpg   Official Seven Forums Overclock Leader boards [2]-002.jpg   Official Seven Forums Overclock Leader boards [2]-003.jpg  
      My Computer


  6. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #586

    Offset with AMD is Different then Intel

    Intel you use offset and turbo together

    You can do the same thing with AMD actually but you would need to calculate the 5GHZ turbo numbers from the overclock you have in place like 4.5 ghz turbo to 5ghz

    I have read about it never tried it though some people get turbo going on good numbers too

    I would try it amd 6100 turbo clock - Overclockers Forums


    This would net you a high oc with lower voltage
      My Computer


  7. Posts : 3,118
    Win7 Home Premium x64 SP1
       #587

    crankypenguin said:
    I use a thermaltake 2.0 pro, computer next to window, window is open, this is Poland, below freezing outside. Here are some screens that should give you what you asked for. I did OC the FSB way, but my CPU was not as happy as when I do it this way. I spiked it to 4.5 for these screens @ [+.175] When I overclocked to 4.8, the Normal CPU VCORE on the bottom of the last pic was around 1.44~V
    Ah no wonder your temp's are so good
    Having looked at your bios pic's again I see it's not offset oveclocking as such but just a different way of showing the settings.
    With your current settings what does your vcore drop to when under load? For 4.5ghz you wouldn't want it to drop below about 1.428v-1.440v while under load but all cpu's are different so it could be higher or lower.
    Does your motherboard have any settings for load-line calibration?
    Try setting your Cpu/nb to 2400Mhz,
    Set the Cpu/nb voltage to manual and set it so it read's 1.225 ish volts.
    set the Cpu Host clock control to manual and set 200.
    Apart from that your setting's look ok but your vcore may need to be increased depending on what it's reading under load.
      My Computer


  8. Posts : 598
    Windows 7 Ultimate x64
       #588

    LLC it has 3 settings, Auto , HIGH and EXTREME, with either HIGH or EXTREME on cpu-z my cpu voltage is maxed out nonstop at whatever setting I set in bios. Plus when using LLC I get a lot of BSOD's :/
      My Computer


  9. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #589

    You should check out gigabytes OC program

    For AMD my LLC was Med to High anything higher would BSOD
      My Computer


  10. Posts : 598
    Windows 7 Ultimate x64
       #590

    ganjiry said:
    crankypenguin said:
    I use a thermaltake 2.0 pro, computer next to window, window is open, this is Poland, below freezing outside. Here are some screens that should give you what you asked for. I did OC the FSB way, but my CPU was not as happy as when I do it this way. I spiked it to 4.5 for these screens @ [+.175] When I overclocked to 4.8, the Normal CPU VCORE on the bottom of the last pic was around 1.44~V
    Ah no wonder your temp's are so good
    Having looked at your bios pic's again I see it's not offset oveclocking as such but just a different way of showing the settings.
    With your current settings what does your vcore drop to when under load? For 4.5ghz you wouldn't want it to drop below about 1.428v-1.440v while under load but all cpu's are different so it could be higher or lower.
    Does your motherboard have any settings for load-line calibration?
    Try setting your Cpu/nb to 2400Mhz,
    Set the Cpu/nb voltage to manual and set it so it read's 1.225 ish volts.
    set the Cpu Host clock control to manual and set 200.
    Apart from that your setting's look ok but your vcore may need to be increased depending on what it's reading under load.
    By this *Try setting your Cpu/nb to 2400Mhz* you mean CPU Northbright Frequency below the multiplier? Because I once set that to 2600mhz and I had to manually reset cmos with the two pins
      My Computer


 
Page 59 of 129 FirstFirst ... 49575859606169 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:55.
Find Us