Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Question about NB and Bus auto vs manual and voltage

19 Nov 2013   #1

Windows 7 Ultimate x64
Question about NB and Bus auto vs manual and voltage

I have a fx-6100 and in my bios the Ht frequency is on AUTO 2400mhz, while the NB frequency is @ 2000MHZ. I have my chip OCed via cpu multiplier to 22x and raised voltage to [+1.750]. NB voltage is on auto as, its its multiplier. My bus is on auto ( 201.3) as well. I have been told that the bulldozers like the nb and ht freq to be equal. I have tried this with ht and nb @ 12x which gave both 2400mhz, and bus on manual which gave me 200, ram was on auto for the time being but it was read correctly. Simply my question is, can I set the NB to 12x, without setting the bus to manual, leave it at auto (201.3) and give the nb a +1 in voltage which would give it around 1.2~V?

PS I have also been getting random aero shut offs but at the time I noticed my voltate dipped to like 1.2 on the cpu, so I lowere cpu voltage to [+1.500] and turned LLC to regular ( I only have 3 options, auto, regular, extreme) Now my cpu voltage is at a constant 1.440-1.456....should I maybe lower it to [+.125] with LLC set to regular to get a slightly lower constant?

My System SpecsSystem Spec
22 Nov 2013   #2

Win8/8.1,Win7-U64, Vista U64, uncounted Linux distor's

Hi cranky, that vcore seems high to me but I'm not familiar with what the 6100 likes. My 8350 runs a 1.313 20x P-state. My OC raised that to 1.404. The lower your 20x p-state voltage is (at default) the better the chip can oc.

Many amd clockers leave the ht alone and very small changes to nb voltage. About all I change is vcore, bus and multiplier. Some very good amd OC guides at and

Question about NB and Bus auto vs manual and voltage-capture.jpg

My System SpecsSystem Spec

 Question about NB and Bus auto vs manual and voltage

Thread Tools

Similar help and support threads
Thread Forum
is possible to disable auto restore, while manual restore intact?
my windows 7 keeps deleting my old system restore point that i've manually created everytime there's an auto restore point being made... for example I have installed/uninstall/update a software, then poof there's an auto restore created and my old restore point gone... is it possible to turn...
Backup and Restore
Memory voltage question.
Hey guys/gals Quick question for you.. I was going to buy some extra ram for my father in law, but then I thought perhaps I could upgrade mine and give him my G.Skill Ripjaws. The question is regarding voltage.
Hardware & Devices
Win 7 SP1 not auto-installed & old updates popup after manual install?
Just found out Win 7 SP1 was not auto-installed in a netbook and a home PC today, even though both machines were set up to auto-update. The SP1 was sitting in the Windows update notification. Is this normal? Also after manually installing SP1 (i.e. click OK in Windows update), some old updates...
Windows Updates & Activation
i7 920 Voltage Question.
I'm trying to obtain a stable 3.8Ghz OC. My temperatures are fine, and my memory frequencies are set accordingly. I'm just afriad to go past 1.35v on the vcore and qpi? Can you go higher?
PC Custom Builds and Overclocking
Services. Which should be manual and/or auto?
In our beloved Windows 7. Can anyone lists the 'Services' that is better to be set to 'manual', beside the Services that is optional to be set to manual. And why? Thanks before.
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:50.
Twitter Facebook Google+