New
#121
Your new build is looking fantastic Jeannie great work and a great thread !I woke up a little after 3AM with a mild hot flash (I would like to "meet" the MAN who named them hot FLASHES!) and couldn't get back to sleep so, once I got the old carcass limbered up, I hung up the two fan braces and the 200mm front grill outside and spent the rest of the morning painting them. After the last coat of color went on, I made an Ace Hardware run to get some nuts, washers, and a 1/2" punch. The biggest punch they had was 3/8". So, after collecting my mail (including some spare case parts I ordered from Corsair), I went back toward home to where there is a Tandy Leather close to my home...er...where it used to be. It turned out they had moved to the other side of town. So, I ran (actually, drove) across town and got the punch.
After a late lunch and visiting a bit with the neighbors, I punched out the 1/2" holes in the acoustic foam for the side panel, installed the foam, then installed the fans on top of the foam.
Attachment 317560
Attachment 317561
Then came the filter bases...
Attachment 317562
...and then the filter tops.
Attachment 317564
Here is the inside view with the foam.
Attachment 317565
I won't be able to install the braces for a week or two until the paint has had enough time to dry completely. I also need to get some black fan connectors to replace those ugly white ones.
The next step will be to finish cutting out the top grill and install the fan shroud—I'm not looking forward to that—then I can start cutting, punching, and installing the acoustic foam in the case. I should be able to install the PSU, fans, and fan hub after that.
I've also decided to make a shroud to cover the entire PSU and the cables coming out of the PSU. The PSU has this big, ugly sticker on top of the case and I can't remove it without voiding the warranty because it has the model and serial number on it (mutter, mutter, mumble, mumble). Since I can't remove it, I'll just cover it. I'm going to secure it to the PSU with 1/8" x 1" magnetic tape, which just happens to be the thickness I need to shim the cover away from the top of the PSU to clear one of the retention brackets. I need to get a sheet of aluminum to make the shroud with (forgot to grab some while I was at Ace Hardware today).