Got a New Case!

Page 12 of 37 FirstFirst ... 2101112131422 ... LastLast

  1. Posts : 9,600
    Win 7 Ultimate 64 bit
    Thread Starter
       #111

    NoN said:
    Nice overall work Lady! You don't make yourself a rest on this job :)
    Thanks, Nonny.
      My Computer


  2. Posts : 9,600
    Win 7 Ultimate 64 bit
    Thread Starter
       #112

    Britton30 said:
    Ding, ding, ding! We have a winner. Actually, it's in the right place; I just punched it too small. The one I should have punched is just below and slightly left it. All will be good once I lay my grubby little hands on a 1/2" punch.
      My Computer


  3. Posts : 9,600
    Win 7 Ultimate 64 bit
    Thread Starter
       #113

    I woke up a little after 3AM with a mild hot flash (I would like to "meet" the MAN who named them hot FLASHES!) and couldn't get back to sleep so, once I got the old carcass limbered up, I hung up the two fan braces and the 200mm front grill outside and spent the rest of the morning painting them. After the last coat of color went on, I made an Ace Hardware run to get some nuts, washers, and a 1/2" punch. The biggest punch they had was 3/8". So, after collecting my mail (including some spare case parts I ordered from Corsair), I went back toward home to where there is a Tandy Leather close to my home...er...where it used to be. It turned out they had moved to the other side of town. So, I ran (actually, drove) across town and got the punch.

    After a late lunch and visiting a bit with the neighbors, I punched out the 1/2" holes in the acoustic foam for the side panel, installed the foam, then installed the fans on top of the foam.

    Got a New Case!-img_0001.jpg

    Got a New Case!-img_0003.jpg

    Then came the filter bases...

    Got a New Case!-img_0004.jpg

    ...and then the filter tops.

    Got a New Case!-img_0006.jpg

    Here is the inside view with the foam.

    Got a New Case!-img_0008.jpg

    I won't be able to install the braces for a week or two until the paint has had enough time to dry completely. I also need to get some black fan connectors to replace those ugly white ones.

    The next step will be to finish cutting out the top grill and install the fan shroud—I'm not looking forward to that—then I can start cutting, punching, and installing the acoustic foam in the case. I should be able to install the PSU, fans, and fan hub after that.

    I've also decided to make a shroud to cover the entire PSU and the cables coming out of the PSU. The PSU has this big, ugly sticker on top of the case and I can't remove it without voiding the warranty because it has the model and serial number on it (mutter, mutter, mumble, mumble). Since I can't remove it, I'll just cover it. I'm going to secure it to the PSU with 1/8" x 1" magnetic tape, which just happens to be the thickness I need to shim the cover away from the top of the PSU to clear one of the retention brackets. I need to get a sheet of aluminum to make the shroud with (forgot to grab some while I was at Ace Hardware today).
    Last edited by Lady Fitzgerald; 12 May 2014 at 22:57.
      My Computer


  4. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #114

    Looks very well done Jeannie.
    Weren't they to be intake fans?
    Got a New Case!
      My Computer


  5. Posts : 9,600
    Win 7 Ultimate 64 bit
    Thread Starter
       #115

    Britton30 said:
    Looks very well done Jeannie.
    Weren't they to be intake fans?
    Got a New Case!
    Son of a... Yes, they are supposed to be intakes. Some day it doesn't pay to get out of bed. Sigh! I'm off to get the tools to remove and flip the flippin' fans.
      My Computer


  6. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #116

    Maybe you need new thermal paste to cool the flashes.

    I've installed many fans backwards myself. Better to find it now though.
      My Computer


  7. Posts : 9,606
    Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
       #117

    I have had trouble getting intake & exhaust fans mounted the correct way so I put on my reading glasses & use a magnifying glass to find the little direction arrow on one of the sides of the fan. Then I color it with a black Sharpie, unless the fan case is black, then white nail polish.
      My Computer


  8. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #118

    The best way I found it that the air always blows in the direction of the motor supports on the fan. At least all the fans I've seen so far.
      My Computer


  9. Posts : 9,600
    Win 7 Ultimate 64 bit
    Thread Starter
       #119

    Thanks, Gary! That was a good catch! Like you said, better to catch it now. What really bites my ample asset (besides tall dogs with poor taste) is I know darn well which way the fans are suppose to go. And these fans are easy because the leading edge of the fan blades have chrome colored stripes on them. Anywho, it's fixed now. I'll have to look into changing my TIM for the hot anything-but-flashes.
      My Computer


  10. Posts : 25,847
    Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
       #120

    Thank you all because now I feel better.
    I'm not the only one that has installed a fan backwards.
    Lady you new build is looking very nice.
      My Computer


 
Page 12 of 37 FirstFirst ... 2101112131422 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:12.
Find Us