How do i check if my over clocking is working

Layback Bear said:

To make sure I understand you correctly.
You can not boot with ram in slot 2 & 4.
But it will boot with ram in slot 2 only.
It will boot with ram in slots 1 & 2.

Your strung out 1 sentence is hard to understand.

yhea sorry about that my punctuation is horrible and spelling
ok 1 and 2 can boot on there own or together no problem
but as soon as i put any ram in 3 or 4 it will not boot

Layback Bear said:

If this is correct I would think it is the motherboard.

To make sure I understand you correctly.
You can not boot with ram in slot 2 & 4.
But it will boot with ram in slot 2 only.
It will boot with ram in slots 1 & 2.

Has this problem always been there??

yes from day 1 that's why i thought the dimm slot 2 and 4 in the manual was a missprint

Layback Bear said:

Does your manual show the same ram location as the picture I posted for the online manual?

yes

Layback Bear said:

Are you going to RMA the motherboard?

not sure honestly did not know what RMA ment till i goggled it. would u recommend it
still kind of confused what it mean tbh dose it mean to give it back to the seller or to the manufacture i am trying to get in contact with msi to see if they will repair it but i can not give it back to amazon as they have a 30 day return policy

pandasniper100 said:

tital says it all so i have run msi command center and run oc engine in it but i do not know how to check if it is working i did try checking my system but it says it is still at 3.40ghz ? do i need to change some bois settings any help is appreciated thanks

Use CPU-Z and check the frequency