NEW CPU right out of the box


  1. Posts : 318
    Genuine windows 7X64
       #1

    NEW CPU right out of the box


    Hello everyone, i just got a new CPU FX 8320 and right out of the box its over clocked at 3.7 MHZ, i am guessing everything in the BIOS is set to AUTO, i also see a few cores going to 4.0

    also it seems my MAX Temps and VID Voltage are a little high for IDLE ?

    can i get the same OC with a manual Settings ?

    and how would i go about doing this manually ?

    Thanks in advance
    Attached Thumbnails Attached Thumbnails NEW CPU right out of the box-cpu-out-box.jpg  
      My Computer


  2. Posts : 1,992
    10 Pro x64
       #2

    IMO if your using the stock amd cooler then those temps on air are good since the 83xx series runs pretty hot. That is a very stable and rock solid mobo you got there I had it before, friend is still using it with almost 5ghz OC. 3.5ghz is your stock clock and that almost always is uped a little with auto mode on most asus boards and 4.0ghz is your boost clock so it only does that if it is using like two cores at a time. AMD FX 8320 What are you temps at load, also don't run multiple temp apps at the same time it will skew the results, if you have aisuite installed the temp part of it is pretty inaccurate I would use coretemp myself.
      My Computer


 

Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 23:37.
Find Us