Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Faulty Mobo?

25 Jan 2015   #1

7 Ultimate 64 bit
Faulty Mobo?

Not sure where to put this but since I built the PC...

I have this board
ASRock MB-A75PR4M Socket FM1/ AMD A75 FC
in a Zalman z9 case, which is huge.

I have been running this pc as a file server for 3/4 of a year. It's been kickin' along decently.
I shut it down, moved it and plugged into a KVM. Booted back up, fail.
No display. I could get another monitor to work w/DVI but the VGA has apparently failed.
While messing around with it I have noticed some things.

If I push, ever so slightly, on the corner where the SATA ports are it will cause one of the case fans to turn on or off. I'm talking SLIGHT pressure.
I've gone back and forth w/different monitors and I've verified that the VGA cable and the monitor work.
The DVI works as well but the VGA has apparently quit.

Is it safe to assume that this board is toast? I mean...the VGA simply does not work and pushing on the board slightly causes a fan to turn on and off.

What would y'all advise? Take it out of the case and see how it runs?

My System SpecsSystem Spec
26 Jan 2015   #2

Windows 10 Pro/ Windows 10 Pro Insider

The pushing on it slightly sounds like either the fan is barely making contact. Try making sure the fan is completely plugged in. Make sure there are no extra standoffs under the board. There should be one for every screw hole in the board and no more. Also make sure the standoff screws are completely screwed in, not real tight, but secure.

I'm not sure what to tell you about the VGA. It could be out or the KVM switch could have done something to it.

If you options are buy another board or make this one work as long as possible, I would opt for #2. If you can RMA it, you may consider that, but Asrock can be difficult to deal with, and in return you will receive a refurb.
My System SpecsSystem Spec

 Faulty Mobo?

Thread Tools

Similar help and support threads
Thread Forum
BSOD 116 faulty graphics card or faulty drivers?
I believe the initial crash was caused by overheating. Based on the fact that I have gotten it to work for a short amount of time, more on that later. Booting up with the drivers for my graphics card enabled causes BSOD to appear but when it is disabled everything is fine. I can boot into safe...
BSOD Help and Support
Is my mobo now faulty?
I upgraded my PC and used my old components to build another PC in an old case I have. Everything seemed to be fine up to the point where all of a sudden my LAN controller disappeared from Windows. No lights are flashing on the port whether it's booting up or in Windows itself. As a temporary...
Hardware & Devices
Fans are spinning but no display.Mobo faulty?
Hi guys,this is 2nd or 3rd post on this forum so if here its the wrong place please notice me.So here is my story 2 months ago i built desktop system(not the greatest but...) which is: Mobo:Foxconn A6vmx CPU:AMD Phenom x3 8600 GPU:ATI Radeon R7 240 1GB GDDR5 2x2GB Ram 800 MHz A friend gave me...
Hardware & Devices
No audio - Faulty mobo ?
I am having some issues with my computer regarding sound. I don't have any of it! My computer was recently RMA'd due to a faulty PSU and video card. I just received it back and the speakers that I used before no longer work. I figured it was a driver issue and simply downloaded the RealTek...
Sound & Audio
Faulty P67 mobo exchange and Windows reinstall
Hey all, it's my firs post here :) So, I decided to exchange my MSI P67 motherboard because of the faulty sata port issue. They will exchange my P67A-GD65 for the same motherboard model but without this error. And the thing is - will I need a clean install of my Win7? I've heard many things about...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:30.
Twitter Facebook Google+