New
#1
CPU Speed, BCLK and Memory Speed: Boot failure.
Probably I am in the right section for this issue. If not, please move it.
A couple of days ago I changed the motherboard and processor, but not the RAM as the RAM is apparently compatible with that board as stated in GIGABYTE - Motherboard - Socket 1150 - GA-B85M-D3H (rev. 1.0/1.1) ...Now, I cannot remember from exactly what time, but most probably it started to happen after I applied the display cable to the iGPU's HDMI port but them went back to nvidia display.
Now, whenever I try to power up the computer after it is turned off for some time being, it refuses to boot, even to the BIOS. I do some hocky pocky with the RAM sticks, then I get this message ....If i opt for either of the first two, it boots up normally.
The computer restarts normally during use.
But if it is off for some hours, then it goes to the same place after I power it up. Some hocky pocky with the memory sticks, this screen, and normal boot.
Same with the integrated GPU and the graphics card.
What I need to do to have a permanent solution? Please guide me, and consider that I am novice about those staff.
Thanks a great lot in advance.
I am providing as much info as I can.
- Speccy Screenshot: http://speccy.piriform.com/results/KtQO0ncvmU8HT5OFYVPwjJU
- CPUz ...
- System Specs is updated with the hardware component changes.
If any more info is needed, let me know, I will supply it.
Thanks again. :)
I have disabled the iGPU in device manager .... but is there any chance that it is kicking in? Or is teh RAM not compatible? Or anything else I need to do in the BIOS setup?