Enabling turbo on my 2500k pushes clock speed too high


  1. niemad
    Posts : 27
    Windows 7 Ultimate x64
       New #1

    Enabling turbo on my 2500k pushes clock speed too high


    I was trying to enable turbo on my bios, mobo is asrock extreme 3 gen 3, in the oc section of the bios and it shot the clock speed up to over 4.4GHz which then put my temps way too high. I don't see where in the bios you can turn down the boost multiplier. Without it enabled even Intel ETU its all blacked out in the manual tuning section. As far as I know the cpu is supposed to boost to 3.7GHz which I would like to test.
      My Computer
    Quote Quote

  3. AddRAM
    Posts : 13,576
    Windows 10 Pro x64
       New #2

    Isn`t there a way to set the max core speed in the bios ?

    You should be able to set each core to a maximum GH.
      My Computer
    Quote Quote

 

  Related Discussions
I need help in understanding one simple thing that I find difficult to realise of my CPU. You can see my specs, I filled all of them in while registering. My BIOS is fully up-to-date, and, except the battery which does not charge, this laptop works fine. I am not a wealthy-enough person to buy...
Recently, I reinstalled my Netgear wna3100 driver. Ever since then, I've been experiencing problems with high pings in games where I normally never had problems with. Pages load slowly even just the home page of Google. I've attached my ipconfig picture. Any help would be greatly appreciated. ...
i5 2500k NH-D14 temperatues - Are they too high?
in PC Custom Builds and Overclocking

Ok i have recently built my new, and first, rig. Had a little trouble with some software issues but the great guys here helped handle that. So i thought i would see if more help could be recieved. With i5 2500k, nh-d14 and a corsair 600t white case i am experiencing idle temperatures of about...
I have a 2Mb/s connection. At least that is what online speed test shows. But why are my downloads much lower? I mean less than 1Mb/s
after dealing with PCI usb hub. i went and got external usb hubs and yes it worked on windows 7, but only FULL speed, my cam went from fast to laggie, iphone connect to usb hub had a message " it can perform faster if connect to a high speed port" , i check under device manager and it says " the...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 12:14.
Find Us