New
#161
Thats not the one! Lol not sure why the link is showing that, check out the attachment in post #155.
Thats not the one! Lol not sure why the link is showing that, check out the attachment in post #155.
Just got my Deepcool Kendomen case come in and I got the window panel off but im finding it difficult to take off the side panel where the wiring goes. I took out the two screws on the back for it and pulled but it wouldnt come out dont want to force anything just incase it might break. Whats the usual way of opening the side panel?
Lay it on it's side and look at the bottom for another screw
Otherwise just pull 2 screws on the back should be all there is.
Just the two screws on the back. Pulled it back a fourth with no movement, when i pulled it to the side it opened up a little bit but only to fit a pound through and there was no click or anything.
Got it off, couldnt pull it off with the handle at the back but then pulled it off using the little bump on the side panel and pulled on that and came sliding off.
Good stuff, really like the case so far, looks durable and having the 5 pre-installed fans is always good.
Theres one cable called USB 3.0, its blue and in the manual says it has to be connected to the psu, does that mean directly or in the motherboard?
Blue cable at the bottom by the PSU placement.
A usb3 would connect to a usb3 port on the mother board not on the psu.
Take a picture of your mother board and we can point it out for you :)