Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: [Project] Fan Speed Controller

21 Jun 2010   #31

Windows 7

hmmmmmmmm, the key switch is hard to find one , can i use a car switch instead of that , damm LED fried , take out LED from RC Cars or broken CArs, i have bunch of LED , nd ur guide is AWEsome , i made up 3 LEd, blue,green nd REd in my FAn

Thanks LordBob UR great

My System SpecsSystem Spec
21 Jun 2010   #32

Windows 7 Ultimate x64, Mint 9

You can use any switch that is single pull, single throw.

My System SpecsSystem Spec
23 Jun 2010   #33

Windows 7 Ultimate x64, Mint 9

I have decided to go back and get some non lighted switches to use for the fans. I have no idea how to wire them up otherwise.

My System SpecsSystem Spec


 [Project] Fan Speed Controller

Thread Tools

Similar help and support threads
Thread Forum
Ethernet Controller Link Speed is locked at 10 Mbps.
My network card is a Realtek PCIe FE Family Controller. I don't know what caused this problem but my Realtek driver is up-to-date, and previously it was a link speed of 100 Mbps. But now for some reason it suddenly dropped to a link speed of 10 Mbps and I've tried a...
Network & Sharing
Fan Speed Controller - Build your Own
How to Create your Own Fan Speed Controller How to Build the Fan Controller This tutorial will show you how to use a Potentiometer (see below) to regulate your fan speed. This will work the same as a commercial fan controller, for a fraction of the cost. The modification will use a...
SATA AHCI Controller, IDE DVD RW slow speed
I have 2 IDE DVD drives (TEAC DV-W516D DVD/CD ReWriter, and TSSTcorp DVD-ROM SH-D162C DVD/CD Reader). Teac is capable of 16X DVD writting. My motherboard Gigabyte Z77-D3H has only SATA II/III slots. So I connected each IDE optical drive to motherboard's SATA II slot(s) using IDE to SATA I adapters...
Hardware & Devices
Firefox 13 Gets a Triple Shot of Speed Through ‘Project Snappy'
Source A Guy
Fan Speed Controller
My Antec 300 case came with 2 case fans that have a switch H M L switch on them... and it is kind of a pain in the ass to open the case to switch the fan speeds. I usually keep them on low for noise reduction, but during gaming or other heat intense work id like them to ramp up a bit to keep the...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:42.
Twitter Facebook