Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Kingston RAM Overclock?

18 Jul 2010   #41
Omlet

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Nemix77 View Post
No post with fans spinning?

If so, turn off the computer by holding the power button then wait for 5 seconds and turn on the computer gain.

I may have tried to push the ram too far.
No problem bro. I set the DRAM Frequency to 1000MHz, nothing serious.


My System SpecsSystem Spec
.
18 Jul 2010   #42
Nemix

Windows 7 Professional
 
 

Try increasing the 'NB Voltage' and 'NB 1.8v Voltage' both by .1 respectively.

You may have to re-input the overclock settings again.
My System SpecsSystem Spec
18 Jul 2010   #43
Nemix

Windows 7 Professional
 
 

So you've got Windows started I presume?

Any CPU-Z screenshots?

My System SpecsSystem Spec
.

18 Jul 2010   #44
Omlet

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Nemix77 View Post
Try increasing the 'NB Voltage' and 'NB 1.8v Voltage' both by .1 respectively.

You may have to re-input the overclock settings again.
I'm confused by what you mean. I increased the NB Voltage to 1.100, but what do you mean by the NB 1.8v Voltage?
My System SpecsSystem Spec
18 Jul 2010   #45
Nemix

Windows 7 Professional
 
 

I'm not sure really, it's in your manual but I do not have your mother or an Asus motherboard in general. I feel like a blind guy walking my dog.

Anyhow, your 'NB Voltage' defaults to 1.0v right and you've increased it by .1 which it is now 1.1v effective right?

Forget about the 'NB 1.8v Voltage' if it does not exit in your BIOS.
My System SpecsSystem Spec
18 Jul 2010   #46
Omlet

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Nemix77 View Post
I'm not sure really, it's in your manual but I do not have your mother or an Asus motherboard in general. I feel like a blind guy walking my dog.

Anyhow, your 'NB Voltage' defaults to 1.0v right and you've increased it by .1 which it is now 1.1v effective right?

Forget about the 'NB 1.8v Voltage' if it does not exit in your BIOS.
I set what you said, but my computer once again refuses to POST. I've restarted and am back in the BIOS.

I really don't want to waste your time bro. I feel that I'm forcing you to walk me through this deathtrap with handcuffs. I would like to achieve 1066, but I also don't want to hold you up.
My System SpecsSystem Spec
18 Jul 2010   #47
Nemix

Windows 7 Professional
 
 

Yeah, I think I've got my hands tied up on this one. All the instructions were very carefully calculated but I've failed. Only thing left to do know is set all the changed settings back to defaults and leave the ram voltage at 2.2v and ram frequency at 800.

Sorry dude, I feel I've wasted you time not to mention had your hopes up.

On the brighter side of things, there's still free dinner this coming Wednesday.
My System SpecsSystem Spec
18 Jul 2010   #48
Omlet

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Nemix77 View Post
Yeah, I think I've got my hands tied up on this one. All the instructions were very carefully calculated but I've failed. Only thing left to do know is set all the changed settings back to defaults and leave the ram voltage at 2.2v and ram frequency at 800.

Sorry dude, I feel I've wasted you time not to mention had your hopes up.

On the brighter side of things, there's still free dinner tomorrow.
It's no trouble at all.
My System SpecsSystem Spec
18 Jul 2010   #49
Nemix

Windows 7 Professional
 
 

If you're still cruising the SevenForums, you may want to check the Chillout Room sub forum to take your mind off things. There's always a whole lot things going on in there.
My System SpecsSystem Spec
18 Jul 2010   #50
Omlet

Windows 7 Ultimate x64
 
 

Quick update Nemix, I went back into the BIOS and manually set all the timings, voltages, and also set it to unganged mode. I was actually able to get into Windows, but I got a BSOD. I'll keep playing around with it until I lose my patience.
My System SpecsSystem Spec
Reply

 Kingston RAM Overclock?




Thread Tools




Similar help and support threads
Thread Forum
Kingston HyperX ddr 3 1600 (cl 9) overclock ( 16 GB)
hey! i got a set of 4 sticks of ram ( 16 gb) . the stock speed they give is 1333 MHZ and i want to change timing clocks , add a little voltage as well to squeeze the max of it ( of course with add cooling) now, my motherboard (asus M4A88t-M) doesnt have AI TWEAKS options that makes the over...
PC Custom Builds and Overclocking
Kingston HyperX DDR3
I am thinking to upgrade my ram from 4GB (4x1024MB Corsair XMS3 DDR3) to Kingston HyperX Blu DDR3 1333MHz CL9 8GB DIMM. In near future, I might upgrade to i5/i7 depending on budget along with motherboard. Rest of the hardware will be carried forward to new machine and hoping this RAM will be...
Hardware & Devices
Q6600 to 3.ghz with 800 kingston ram
Hi if i clock my 2.4 q6600 to 3 ghz will i have to change anything on my ram. My mobo does not support ram voltage option !:huh:
PC Custom Builds and Overclocking
Kingston 256GB USB
Hi I recently bought Kingston 256GB USB it comes with a default exFAT format is it possible to format it using FAT32 the reason of buying it is to load the images on it and play it back on digital photo frames which unfortunately doesnt detect exFAT. I have a laptop with windows 7 and 64 bit
Hardware & Devices
help here~ mine usb kingston cant format
mine kingston cant format when i plug in mine usb windows say need to format after i click on format then it show "windows unable to format" is mine usb pen drive is dead??
Hardware & Devices
New RAM. Corsair or Kingston?
About to upgrade my second PC's ram t0 4gb. I'm looking at: Corsairs TWIN2X4096-6400C5C and Kingstons KHX6400D2B1K2/4G or KHX6400D2K2/4G 2 Questions.
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:50.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App