Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Cooling with Haf 922 case and H50 water cooler

19 Jul 2010   #1

Windows 7 Ult
Cooling with Haf 922 case and H50 water cooler

Hi i am cooling with Haf 922 case and H50 water cooler. I would like to know what people are recomending for their fan setup..I have a push pull setup with my H50. Front intake fan and top exhaust fan. 2 side intakes and 1 bottom intake cpu underload gets to about 51. Please someone help with my setup

My System SpecsSystem Spec
20 Jul 2010   #2

Windows 7 Home Premium 64bit

Top/front - intake
rear- exhaust
My System SpecsSystem Spec
20 Jul 2010   #3



It's a difficult one regarding the H50, Corsair recomments to use the fans on the H50 as intake, but you will be blowing hot air and without a dust filter dust over your motherboard.
I used to use the H50 in P/P and followed their advice because I had a dust filter on it and 3 exhaust fans right above it.
What i've read from other users the difference in using the fans on the H50 as exhaust or intake will only be a couple of degrees.
Anyway I don't think you have bad temps with H50 and a 940 under load.

My System SpecsSystem Spec

22 Jul 2010   #4

Windows 7 Ultimate x64

My experience with a HAF 932 and push / pull with the H50 is having it mounted in the rear exhausting air. I get better temps that way than any other way I have had it mounted in the case.
My System SpecsSystem Spec

 Cooling with Haf 922 case and H50 water cooler

Thread Tools

Similar help and support threads
Thread Forum
Water Cooler
Okay, so I made up my mind I want to try it. I can't decide which one I want. Which one would you suggest? Are the quiet? How much cooler will my cpu be, from what I read the big difference is when under load as ambient temp plays in to idle temp. If you read my specs you will see my mb...
PC Custom Builds and Overclocking
Do I need to put new water in my water cooling system?
So i have heard that some water cooling systems do need new water in them every 6 months, and i have also heard that some never need to have the water replaced, so i have no idea of what brand/kind of water cooling system i have because it has no branding or anything, i got my computer custom built...
PC Custom Builds and Overclocking
Good Water Cooling Case??
So I was wondering what cases people suggest for water cooling cases? Budget max for the case is $150-250. A must have is internal USB3 connector. Also I realize that mid tower may or may not be an option, so probably full size? One other thing is radiator configuration, I want something...
PC Custom Builds and Overclocking
Water Cooling Help!
I'm trying to learn how to setup a simple water cooling heatsink for my i7-2600K. Does anybody know what items I should get to do this?
PC Custom Builds and Overclocking
NEW CASE + Water cooling system
Hello... Some weaks ago I've opened a thread about my games crashing, the result was that my PSU was broken and my CPU and GPU temperature are heating too fast: Also my case is too small there is no room for...
PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:51.
Twitter Facebook Google+