![]() |
|
05 Dec 2010 | #1 |
|
Backing up to a sandisk 8 gb cruzer
I have been writing before in a different forum that had kind of died out. I just bought a Cruzer Blade USB flash drive, 8 gb, to back up my computer - windows 7.
It still doesn't like it. I cannot get an external hard drive and this wasn't that expensive. It says to please insert a d/dvd/or usb drive. Well I did that and it gives me an error to insert a dvd. Why wouldln't I be able to back up on an 8 gb back drive. All I want to back up is my data anyway and not sure how to get just that. |
My System Specs![]() |
. |
|
05 Dec 2010 | #2 |
![]() |
The computer see's the inserted usb drive correct? Remember what drive letter it's assigned and copy and paste the data you want directly to it, if needed create a folder in the usb for the data.
|
My System Specs![]() |
05 Dec 2010 | #3 |
|
I personally do not ever recommend flash drives as a backup medium.
They are not reliable. They have a life span and do go bad. External Hard Drives are always highly preferred. However,,, what application are you trying to use to run a back up? If you are using Windows Back up, it may not like backing up to a Flash Drive, They are seen as Removable Media. I am not completely familiar with Windows Backup so can not say for sure. But if that is the case, then the flash drive may not work. Or it may be too small? The other option is drag and drop |
My System Specs![]() |
. |
|
05 Dec 2010 | #4 |
![]() |
I have made images to USB sticks using Macrium. Provided the stick can hold the image (which is a bit more than 50% of the data you want to image), it will work.
|
My System Specs![]() |
05 Dec 2010 | #5 |
|
I put the usb in and go to computers and it doesn't even show up there that I have a usb drive in. I tried a DVD and it worked, but I would much prefer to use a usb. When you say which application am I using. I just put in the usb,, go to my "pictures" and tried to drag and drop except there was nothing there.. So I don't know if I used a program.
|
My System Specs![]() |
05 Dec 2010 | #6 |
|
It is an 8 gb usb
|
My System Specs![]() |
05 Dec 2010 | #7 |
|
linnem - when I go to computer is does not recognize a usb
|
My System Specs![]() |
. |
05 Dec 2010 | #8 |
|
Open the start menu, right click on computer, then manage, then disk management. Do you see 8GB of unallocated space?
|
My System Specs![]() |
05 Dec 2010 | #9 |
![]() |
That is strange. Normally it would first install the driver (you see a ballon on the bottom right) and then Autoplay should come up. Did you tra another USB port?
PS: The advantage if you image the data is that it gets compressed and you can fit appr. twice as much data. |
My System Specs![]() |
05 Dec 2010 | #10 |
|
yes parabellum I saw the 8 gb of unallocated space.
I was just trying to drag my documents which are 3 gb onto this usb and it says it will take 22 hours????? |
My System Specs![]() |
![]() |
Thread Tools | |
Similar help and support threads | ||||
Thread | Forum | |||
Sandisk cruzer blade 64GB not detected in my computer Hello everyone! :) I just bought a new sandisk cruzer blade 64bit, it worked fine and the win 7 detected it, and I wanted to format it to NTFS, but I couldn't, so I formated it into Fat32, because it was on exFat, and then I converted from Fat32 to NTFS by using "Mini partition wizard" .. and I... |
Hardware & Devices | |||
Error with nearly-new 32Gb Sandisk Cruzer Glide It now reports itself as a Sandisk Firebird with 64Mb total and it is reported by Win7 Home Premium x64 as of type RAW, when I know it should be either VFAT or FAT32. Have scanned drive with Easeus Partition Manager (nada, except same report) and Minitool Partition Wizard Home Edition (also, same... |
Software | |||
16 GB SanDisk Cruzer suddenly becomes write protected! Got a 16 GB SanDisk Cruizer flash drive and it did well - until I swapped my hard drive for an SSD. Since the SSD conversion, the ReadyBoost file on it does not work - Windows won't use it because I have an SSD - that' fine. The real problem is the SanDisk became write protected - can't format,... |
Hardware & Devices | |||
Sandisk U3 Cruzer Micro won't load U3 software I've updated my U3 drive to the newest version. When I plug in it occupies J: (the "CD Drive") and K:. When I try to run the U3 launcher it tells me Windows has mounted it on a drive that was already occupied and that I can't start it. Disk management won't let me change the drive letter of... |
Hardware & Devices |
Our Sites |
Site Links |
About Us |
Find Us |
Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd All times are GMT -5. The time now is 12:43. |
![]() ![]() |