Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Images & switching AHCI to IDE

18 Dec 2010   #11
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8

Even for SSDs, the AHCI versus IDE question seems to be open. Here are a couple of threads where the guys discussed it.

My System SpecsSystem Spec

 Images & switching AHCI to IDE

Thread Tools

Similar help and support threads
Thread Forum
Switching AHCI to IDE in Windows 8.1
I'd like to know how to switch from AHCI to IDE in Windows 8.1 Professional x64. I know there's countless threads on this but they all (all I've seen/found) are directed towards Windows 7 I actually switched from IDE to AHCI with the registry value changes and BIOS change but if I just change...
Hardware & Devices
Switching SATA Mode from RAID to AHCI
While dealing with another issue, I've been told that I should switch my SATA mode from RAID to AHCI. I do not have a RAID array and don't plan to. However, I've been told that I would need drivers for this, and I'm not sure if my Windows installation has them or not. I don't want to switch modes...
Hardware & Devices
Switching from IDE mode to AHCI help needed, please
I have an older win7 media server (WMC with 4 cable card tuners) that I want to add a 3TB drive. However when I first installed sata controller was set to ide mode. The 3tb drive only works with AHCI mode and of course my WIN7 will not boot if I only switch mode in bios. I was going to save...
General Discussion
After switching from IDE to AHCI disk requires formatting to be recogn
I reinstalled windows, and went with AHCI for eSata hot swap. 2 of my 6 drives did not appear in my computer. 1 of them I just assigned a drive letter in DM and it is fine. the other, which was previously working, says it requires initialization, which I did, and assigned a drive letter.......
Hardware & Devices
0x0000007B After switching to AHCI
I recently put together a custom computer (first time building one) I set it up in IDE mode, but now I'd like to switch it to AHCI because the SSD is running really slow. It boots up slow, windows takes quite a while to load up. I've got a Western Digital 1 TB in addition to my Mushkin Chronos...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:48.
Twitter Facebook Google+