Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: cpu dying?

26 Mar 2011   #1
farout

win7
 
 
cpu dying?

Hello all - a strange thing happened the other day ( two days in fact ). On startup
the screen stayed on the bios for a few minutes then loaded windows. Normally the bios screen is only on for a few seconds. Windows loaded and
seemed to be fine. However the reset switch which normally flashes when the
hard drive is being accessed stayed on. A reboot didn't do anything. The next day
it was the same thing. Local Radio Shack dude said that the cpu is getting ready
to die. Yesterday and today all is back to normal. And no, the interior is not full
of dust. Is my $$$ cpu ill or is it something not so drastic?
Mike

win7 64
i7 920 cpu 2.67 mHz
6gB RAM
500gB drive
1tB usb drive for backup


My System SpecsSystem Spec
.
26 Mar 2011   #2
seth500

Windows 7 Ultimate x64
 
 

That happens to my computer from time to time and it's not from the cpu dying, when the cpu goes it goes. I have never known one just to slowly die. Sometimes after a hard reboot of my system it will hang on the bios screen until the system regains it's bearings sort of speak. I don't think you have any major problems but the size of the drive powering up could do that also, it's nothing to fret over...
My System SpecsSystem Spec
26 Mar 2011   #3
farout

win7
 
 
thanks

Thanks for your input, that sets my mind at ease....
Mike
My System SpecsSystem Spec
.

26 Mar 2011   #4
Dwarf

Windows 8.1 Pro RTM x64
 
 

A CPU is one of those components that either works or it doesn't. Your problem with staying on the BIOS screen for longer than normal could point to potential hardware issue(s), namely one or more hardware items failing to report themselves correctly when interrogated as part of the BIOS POST process. What I would do to begin with is to enter your BIOS and turn off the Quick Boot option. This means that the POST will take longer, but it also means that its progress will also be displayed on the screen, and you should be able see where the process is hanging, or being delayed longer than normal.
My System SpecsSystem Spec
26 Mar 2011   #5
mjf

Windows 7x64 Home Premium SP1
 
 

It appears the BIOS is taking longer in POST. I don't see how this relates to a failing CPU.
I find the largest variablity in POST times involves USB peripherals, particularly HDDs. For example, it takes a noticeable (but livable) amount of time for my POST to wake up and check a partitioned 1 TB ext USB HDD. I generally plug them in after boot.
My System SpecsSystem Spec
30 Mar 2011   #6
SLeePYG72786

Windows 7 Professional x64
 
 

I had a similar problem while working on my mom's PC. It had an IDE hard drive and optical drive on the same cable - which meant that the hard drive was set to Master and the optical was set to Slave. We upgraded the optical from IDE to SATA, and after running into the POST screen stalling issue a couple of times, I finally drove myself to remove the hard drive and check the jumpers on it. Yep, it was still set to Master with Slave present. Just set it to Master or Single Drive Only and now it zips right past the POST screen.

Hopefully this can help either you or someone else. It's such an obvious and basic thing to check that I just overlooked it trying to delve deeper into the problem. o.o
My System SpecsSystem Spec
Reply

 cpu dying?




Thread Tools




Similar help and support threads
Thread Forum
Is my PSU Dying?
Well... I had an interesting evening today. Mom was using her PC as she normally does (formerly mine), when suddenly, a savage BSOD appeared, it pointed to atikumg (IIRC), so I assumed the drivers were faulty, so, I unisnstalled drivers, ran AMD driver cleanup, ran Ccleaner and upgraded to the...
Hardware & Devices
Machine dying??
The Ivy Bridge is slowly dying I am sure because of the increasing number of problems - the last but not least it is now not seeing sticks or other drives even thought the software for them is installing. Thhey do not show up in Computer or Disk management but do in diskpart?? Have tried...
General Discussion
Are your CDs dying?
http://www.zdnet.com/are-your-cds-dying-7000029547/?s_cid=e539&ttag=e539&ftag=TRE17cfd61
Chillout Room
Is my HD dying?
Hi all, I have noticed a few strange things regarding my HD lately. I have re-imaged my laptop a few times lately and once its completed i always run disk check after. The last 2 re-images i have done have shown a lot of cluster errors in disk check. I actually tried to create a new image with...
Performance & Maintenance
Which one is dying?.......
as far as i can gather (not much) i have either one. two, or three problems. i have noticed a severe decrease in load times, video plat back, and just general performance of my machine. i've boiled it down to 1 of 3 things. My cpu is finally kicking the bucket. the temperature diode isn't...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:31.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App