Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SpeedFan Volts

22 Jul 2011   #1
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 
SpeedFan Volts

I have touched on this a bit previously, but I have been trying to sort this out since, without any success. I'm totally confused by voltages displayed in SpeedFan, as shown in the screenshot. The only ones that I think that I understand are the 12v, 3Vsb and 3Vcc. I looking for a value for the 5v circuit, and the only thing that I think might be it, is the AVcc, but if it is, it is far too low...the same is true for Vbat.

I don't think that it is a power supply problem, because it was working perfectly on my old rig, and these numbers popped up from the very beginning with the new.

I'm also confused by Vin 1-3, as the only vague reference that I found said that Vin 1 is the RAM voltage, but the only one even close is Vin 2, and it is somewhat too low.

I have been looking for a comprehensive reference to define each of these values without any luck. Can someone point me in the right direction?

SpeedFan Volts-sf.png




My System SpecsSystem Spec
.
22 Jul 2011   #2
Dwarf

Windows 8.1 Pro RTM x64
 
 

I'll download and have a play with it when I get home.
My System SpecsSystem Spec
22 Jul 2011   #3
Dwarf

Windows 8.1 Pro RTM x64
 
 

Here is what I get with SpeedFan:

SpeedFan Volts-capture.png

These figures look OK to me.

I notice that you are using Version 4.43. As you can see, I am using Version 4.44. You could try that to see if it makes a difference.


My System SpecsSystem Spec
.

22 Jul 2011   #4
stormy13
Microsoft MVP

Win 7 Ultimate x64
 
 

Looks like you're not the only one with that motherboard and odd readings,

0001689: Support for Nuvoton NCT6775F - Almico's Bug Tracker

Alfredo says it should be supported no problem, but it doesn't look like it. Maybe post there as well and see what he has to say about it.
My System SpecsSystem Spec
22 Jul 2011   #5
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

Quote   Quote: Originally Posted by Dwarf View Post
Here is what I get with SpeedFan:

Attachment 166299

These figures look OK to me.

I notice that you are using Version 4.43. As you can see, I am using Version 4.44. You could try that to see if it makes a difference.
I just updated, but it didn't help.
My System SpecsSystem Spec
22 Jul 2011   #6
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

Quote   Quote: Originally Posted by stormy13 View Post
Looks like you're not the only one with that motherboard and odd readings,

0001689: Support for Nuvoton NCT6775F - Almico's Bug Tracker

Alfredo says it should be supported no problem, but it doesn't look like it. Maybe post there as well and see what he has to say about it.
Yes, I did not understand how he could consider that report to be resolved either. Instead of posting another bug report, I just sent him an email to see what he might say about it.
My System SpecsSystem Spec
Reply

 SpeedFan Volts




Thread Tools




Similar help and support threads
Thread Forum
Is 3 Volts enough to power a cpu fan
Is 3 volts enough to power a Cpu fan on a Solar panel?
Chillout Room
BSOD on new build - Increasing memory volts stabilised for 12 hours
Hi all, Well i've come here in desperation because i've tried every common sense solution off my own back and come up with nothing. I built my pc exactly a week ago, and after the first couple of days i started getting infrequent bsod screens. I tried googling codes, installing different...
BSOD Help and Support
970A-G46 MB Ram .Volts Question
Will this motherboard accept 1.6v memory by corsair vengance? im looking at the 1.6v memory modules and the g skill sniper series which run at 1.5v
Gaming
Set up SpeedFan
Hi, I need some help setting up SpeedFan. I didn't use this program before. The goal is to have automatic fan control (balance between noise PC and cool PC) but I can't even get it to control CPU fan speed manually as it's confusing. I can control the GPU fan speed though. Here are...
Hardware & Devices
OC older Pentium D, how many volts?
I have an older HP desktop that has an Pentium D 925 @ 3GHz. According to this: Intel BSEL & VID mod Guide I should be able to use the BSEL mod and VID mod on this socket 775 CPU. Now my only concerns are how much voltage would I need to use 1.4 or 1.45? The Pentium D has a bus speed of 200 MHz,...
PC Custom Builds and Overclocking
SpeedFan.............
Anyone on here actually use it? If so...got any step by step methods for me. Want to know how to exactly control the fan in my laptop so it stays cool. I havent really planned with it yet. But just decided to ask on here.
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:45.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App