Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC Scans finds errors and can't repair some of them

11 Dec 2011   #11
Brink

64-bit Windows 10 Pro
 
 

Quote   Quote: Originally Posted by PocketAcesDMB View Post
giving up on this
I don't understand. We already told you that you just needed to install the latest drivers for your tuner card. All you needed to do is find out what brand and model the tuner card is do that you could either download them, or post what it is here for us to help you find the driver for it. Since you do not remember, you'll probably need to pull the card out to see.


My System SpecsSystem Spec
.
11 Dec 2011   #12
PocketAcesDMB

MS Windows 7 64-bit SP1
 
 

Quote   Quote: Originally Posted by Brink View Post
I don't understand. We already told you that you just needed to install the latest drivers for your tuner card. All you needed to do is find out what brand and model the tuner card is do that you could either download them, or post what it is here for us to help you find the driver for it. Since you do not remember, you'll probably need to pull the card out to see.
up further inspection i do not have a tuner card at all what i have is this http://pctheater.ca/products_detail/...part/fp002.pdf its the only extra card i have
My System SpecsSystem Spec
11 Dec 2011   #13
Brink

64-bit Windows 10 Pro
 
 

From what little I can find on that card, it shows that it doesn't have drivers for it, so I suppose that it's just using generic drivers included in Windows 7.

If you are not having any issues with it, then there really is no reason to worry about it.
My System SpecsSystem Spec
.

11 Dec 2011   #14
PocketAcesDMB

MS Windows 7 64-bit SP1
 
 

im just worried about the sfc not being able to be 100 percent i know that it will and could lead to system issues in the future so it has to be something else
My System SpecsSystem Spec
12 Dec 2011   #15
Brink

64-bit Windows 10 Pro
 
 

The risk of causing issues trying to manually replace the xchalVx64.sys file with a new copy from your installation disc using the tutorial below are much greater than letting it be if you are not having issues with it. I would strongly recommend that you create a restore point before doing this in case you may need to do a system restore to undo any mistake that may be made.
Extract Files from Windows 7 Installation DVD
If you really must, then search your C: (Windows 7) drive for all locations that the xchalVx64.sys file is located. Next, use the tutorial above to extract a new copy of the xchalVx64.sys file from your installation disc at the same location on the installation disc. Next, follow the yellow TIP box at the bottom of the tutorial above to replace the copies of the xchalVx64.sys file on your computer with the ones that you extracted from the installation disc.

Hope this helps,
Shawn
My System SpecsSystem Spec
12 Dec 2011   #16
PocketAcesDMB

MS Windows 7 64-bit SP1
 
 

yes shawn it does helpnow trying to find where the file is located and what folders on my system

replaced and doing sfc scan check now
My System SpecsSystem Spec
12 Dec 2011   #17
PocketAcesDMB

MS Windows 7 64-bit SP1
 
 

files were replaced and still no 100 percent file verification latest log attached
My System SpecsSystem Spec
12 Dec 2011   #18
Brink

64-bit Windows 10 Pro
 
 

Yep, same file. I'm not sure what else or if you will be able to fix it.
My System SpecsSystem Spec
12 Dec 2011   #19
PocketAcesDMB

MS Windows 7 64-bit SP1
 
 

Quote   Quote: Originally Posted by Brink View Post
Yep, same file. I'm not sure what else or if you will be able to fix it.

so retarded
My System SpecsSystem Spec
Reply

 SFC Scans finds errors and can't repair some of them




Thread Tools




Similar help and support threads
Thread Forum
zhpcleaner finds one file, then repair does not remove...
Over the last two days, ZHPCleaner is finding one file to remove (Superfluous.Temporary.Empty), then when repair is run, it is getting stuck at the same place (see pic below). Yesterday, I did a reset, ran zhpc and the same thing happened - same place - 96% file #30. Powered down, ran zhpc, same...
Software
sfc finds corrupted files, but can't repair them
When I run my system backup program, it fails with a message about corrupted files. So I ran sfc /scannow, and it found some corrupted files which it said it could not repair. So I ran the disk checker, which found no errors on the HD. So what other program can I run to check and correct the...
Performance & Maintenance
Interrupted scans and disabled antivirus after Windows Startup Repair
Hello, need help. My computer froze while my Chrome browser was on and I had to bail out using the power key and Windows Startup Repair ran for my Windows 7 Home Premium 32 bit edition. After this, I must say my computer is not acting the same way. Usually, my Acer Aspire 5472Z laptop would...
System Security
CCleaner repeatedly finds same Reg Errors
Win7x64-HomePremium Using CCleaner regularly to clean the Registry I see these file types below listed in great numbers. Is there a specific place to look for a problem? Nothing seems to be wrong. Thank you. ActiveX/COM Issue ehGLID.GLIDPlugInUDCR -...
Performance & Maintenance
SFC runs, finds errors, but does not create CBS.log file
greetings all I have a similar problem (as it relates to cbs logs) as the OP of this thread: SFC runs, finds errors, but does not create CBS.log file - Vista Forums I read through the whole page, however I am not yet technologically advanced enough to understand what a "repair" environment...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 00:51.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App