Repair your computer option not working (restoring factory backup)

Page 3 of 21 FirstFirst 1234513 ... LastLast

  1. ussama
    Posts : 17
    Windows 7 Home Premium x64
    Thread Starter
       New #21

    Yes its Working...

    Akheer ho yaar tum ( meaning you are awesome)

    Thanks Alot.
      My Computer
    Quote Quote

  3. ussama
    Posts : 17
    Windows 7 Home Premium x64
    Thread Starter
       New #22

    Those Ids u marked are necessary to remove ?
      My Computer
    Quote Quote

  4. Kaktussoft
    Posts : 10,796
    Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
       New #23

    ussama said:
    Those Ids u marked are necessary to remove ?
    one is pointing to C:\recovery and that doesn't exit, you told me. It isn't referenced by any other ID anyway. so save to delete.

    The other entry is just a copy. reagentc /enable made it and didn't remove the old entry.

    Just type or copy paste the command and delete them as said in previous post. Geetings to Pakistan
      My Computer
    Quote Quote

  6. Kaktussoft
    Posts : 10,796
    Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
       New #24

    Kaktussoft said:
    ussama said:
    Those Ids u marked are necessary to remove ?
    one is pointing to C:\recovery and that doesn't exit, you told me. It isn't referenced by any other ID anyway. so save to delete.

    The other entry is just a copy. reagentc /enable made it and didn't remove the old entry.

    Just type or copy paste the command and delete them as said in previous post. Geetings to Pakistan
    It's very safe to delete them. But test winre again afterwards.
      My Computer
    Quote Quote

  7. ussama
    Posts : 17
    Windows 7 Home Premium x64
    Thread Starter
       New #25

    These are the final result after deleting those references.
    RE is working

    Windows Boot Manager
    --------------------
    identifier {bootmgr}
    device partition=\Device\HarddiskVolume2
    description Windows Boot Manager
    locale en-US
    inherit {globalsettings}
    default {current}
    resumeobject {8d8f1553-2785-11e1-a176-a0a89368bcab}
    displayorder {current}
    toolsdisplayorder {memdiag}
    timeout 10

    Windows Boot Loader
    -------------------
    identifier {current}
    device partition=C:
    path \Windows\system32\winload.exe
    description Windows 7
    locale en-US
    inherit {bootloadersettings}
    recoverysequence {c26c3bcd-5c99-11e1-a582-a4badbd9db87}
    recoveryenabled Yes
    osdevice partition=C:
    systemroot \Windows
    resumeobject {8d8f1553-2785-11e1-a176-a0a89368bcab}
    nx OptIn

    Windows Boot Loader
    -------------------
    identifier {c26c3bcd-5c99-11e1-a582-a4badbd9db87}
    device ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    path \windows\system32\winload.exe
    description Windows Recovery Environment
    inherit {bootloadersettings}
    osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    systemroot \windows
    nx OptIn
    winpe Yes

    Resume from Hibernate
    ---------------------
    identifier {8d8f1553-2785-11e1-a176-a0a89368bcab}
    device partition=C:
    path \Windows\system32\winresume.exe
    description Windows Resume Application
    locale en-US
    inherit {resumeloadersettings}
    filedevice partition=C:
    filepath \hiberfil.sys
    debugoptionenabled No

    Windows Memory Tester
    ---------------------
    identifier {memdiag}
    device partition=\Device\HarddiskVolume2
    path \boot\memtest.exe
    description Windows Memory Diagnostic
    locale en-US
    inherit {globalsettings}
    badmemoryaccess Yes

    EMS Settings
    ------------
    identifier {emssettings}
    bootems Yes

    Debugger Settings
    -----------------
    identifier {dbgsettings}
    debugtype Serial
    debugport 1
    baudrate 115200

    RAM Defects
    -----------
    identifier {badmemory}

    Global Settings
    ---------------
    identifier {globalsettings}
    inherit {dbgsettings}
    {emssettings}
    {badmemory}

    Boot Loader Settings
    --------------------
    identifier {bootloadersettings}
    inherit {globalsettings}

    Hypervisor Settings
    -------------------
    identifier {hypervisorsettings}
    hypervisordebugtype Serial
    hypervisordebugport 1
    hypervisorbaudrate 115200

    Resume Loader Settings
    ----------------------
    identifier {resumeloadersettings}
    inherit {globalsettings}

    Device options
    --------------
    identifier {c26c3bce-5c99-11e1-a582-a4badbd9db87}
    description Ramdisk Options
    ramdisksdidevice partition=\Device\HarddiskVolume2
    ramdisksdipath \Recovery\WindowsRE\boot.sdi
      My Computer
    Quote Quote

  8. Kaktussoft
    Posts : 10,796
    Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
       New #26

    If you deleted only the 2 ID's then it's working. Does memory diagnostics work from winre? Does hibernation work (in case you ever use it). Test yourself. Your initial problem has been resolved
      My Computer
    Quote Quote

  10. ussama
    Posts : 17
    Windows 7 Home Premium x64
    Thread Starter
       New #27

    Now From WIN RE I install windows recovery . After recovering the system I check repair your computer option and the problem arises again. Then i use reagentc commands and WIN RE starts working again. DO u suggest any permanent solution. and why the problem arises again.

    bcdedit/enum all (enteries just after recovery when WIN RE not working)


    Windows Boot Manager
    --------------------
    identifier {bootmgr}
    device partition=\Device\HarddiskVolume2
    description Windows Boot Manager
    locale en-US
    inherit {globalsettings}
    default {current}
    resumeobject {8d8f1553-2785-11e1-a176-a0a89368bcab}
    displayorder {current}
    toolsdisplayorder {memdiag}
    timeout 10

    Windows Boot Loader
    -------------------
    identifier {current}
    device partition=C:
    path \Windows\system32\winload.exe
    description Windows 7
    locale en-US
    inherit {bootloadersettings}
    recoverysequence {4ff2fcb5-a07f-11df-9201-a4badbd9db87}
    recoveryenabled Yes
    osdevice partition=C:
    systemroot \Windows
    resumeobject {8d8f1553-2785-11e1-a176-a0a89368bcab}
    nx OptIn

    Windows Boot Loader
    -------------------
    identifier {c26c3bcd-5c99-11e1-a582-a4badbd9db87}
    device ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    path \windows\system32\winload.exe
    description Windows Recovery Environment
    inherit {bootloadersettings}
    osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    systemroot \windows
    nx OptIn
    winpe Yes

    Resume from Hibernate
    ---------------------
    identifier {8d8f1553-2785-11e1-a176-a0a89368bcab}
    device partition=C:
    path \Windows\system32\winresume.exe
    description Windows Resume Application
    locale en-US
    inherit {resumeloadersettings}
    filedevice partition=C:
    filepath \hiberfil.sys
    debugoptionenabled No

    Windows Memory Tester
    ---------------------
    identifier {memdiag}
    device partition=\Device\HarddiskVolume2
    path \boot\memtest.exe
    description Windows Memory Diagnostic
    locale en-US
    inherit {globalsettings}
    badmemoryaccess Yes

    EMS Settings
    ------------
    identifier {emssettings}
    bootems Yes

    Debugger Settings
    -----------------
    identifier {dbgsettings}
    debugtype Serial
    debugport 1
    baudrate 115200

    RAM Defects
    -----------
    identifier {badmemory}

    Global Settings
    ---------------
    identifier {globalsettings}
    inherit {dbgsettings}
    {emssettings}
    {badmemory}

    Boot Loader Settings
    --------------------
    identifier {bootloadersettings}
    inherit {globalsettings}

    Hypervisor Settings
    -------------------
    identifier {hypervisorsettings}
    hypervisordebugtype Serial
    hypervisordebugport 1
    hypervisorbaudrate 115200

    Resume Loader Settings
    ----------------------
    identifier {resumeloadersettings}
    inherit {globalsettings}

    Device options
    --------------
    identifier {c26c3bce-5c99-11e1-a582-a4badbd9db87}
    description Ramdisk Options
    ramdisksdidevice partition=\Device\HarddiskVolume2
    ramdisksdipath \Recovery\WindowsRE\boot.sdi


    bcdedit/enum all (enteries after using reagentc commands)


    Windows Boot Manager
    --------------------
    identifier {bootmgr}
    device partition=\Device\HarddiskVolume2
    description Windows Boot Manager
    locale en-US
    inherit {globalsettings}
    default {current}
    resumeobject {8d8f1553-2785-11e1-a176-a0a89368bcab}
    displayorder {current}
    toolsdisplayorder {memdiag}
    timeout 10

    Windows Boot Loader
    -------------------
    identifier {6425ee6e-5ca5-11e1-a48c-a4badbd9db87}
    device ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{6425ee6f-5ca5-11e1-a48c-a4badbd9db87}
    path \windows\system32\winload.exe
    description Windows Recovery Environment
    inherit {bootloadersettings}
    osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{6425ee6f-5ca5-11e1-a48c-a4badbd9db87}
    systemroot \windows
    nx OptIn
    winpe Yes

    Windows Boot Loader
    -------------------
    identifier {current}
    device partition=C:
    path \Windows\system32\winload.exe
    description Windows 7
    locale en-US
    inherit {bootloadersettings}
    recoverysequence {6425ee6e-5ca5-11e1-a48c-a4badbd9db87}
    recoveryenabled Yes
    osdevice partition=C:
    systemroot \Windows
    resumeobject {8d8f1553-2785-11e1-a176-a0a89368bcab}
    nx OptIn

    Windows Boot Loader
    -------------------
    identifier {c26c3bcd-5c99-11e1-a582-a4badbd9db87}
    device ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    path \windows\system32\winload.exe
    description Windows Recovery Environment
    inherit {bootloadersettings}
    osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    systemroot \windows
    nx OptIn
    winpe Yes

    Resume from Hibernate
    ---------------------
    identifier {8d8f1553-2785-11e1-a176-a0a89368bcab}
    device partition=C:
    path \Windows\system32\winresume.exe
    description Windows Resume Application
    locale en-US
    inherit {resumeloadersettings}
    filedevice partition=C:
    filepath \hiberfil.sys
    debugoptionenabled No

    Windows Memory Tester
    ---------------------
    identifier {memdiag}
    device partition=\Device\HarddiskVolume2
    path \boot\memtest.exe
    description Windows Memory Diagnostic
    locale en-US
    inherit {globalsettings}
    badmemoryaccess Yes

    EMS Settings
    ------------
    identifier {emssettings}
    bootems Yes

    Debugger Settings
    -----------------
    identifier {dbgsettings}
    debugtype Serial
    debugport 1
    baudrate 115200

    RAM Defects
    -----------
    identifier {badmemory}

    Global Settings
    ---------------
    identifier {globalsettings}
    inherit {dbgsettings}
    {emssettings}
    {badmemory}

    Boot Loader Settings
    --------------------
    identifier {bootloadersettings}
    inherit {globalsettings}

    Hypervisor Settings
    -------------------
    identifier {hypervisorsettings}
    hypervisordebugtype Serial
    hypervisordebugport 1
    hypervisorbaudrate 115200

    Resume Loader Settings
    ----------------------
    identifier {resumeloadersettings}
    inherit {globalsettings}

    Device options
    --------------
    identifier {6425ee6f-5ca5-11e1-a48c-a4badbd9db87}
    description Ramdisk Options
    ramdisksdidevice partition=\Device\HarddiskVolume2
    ramdisksdipath \Recovery\WindowsRE\boot.sdi

    Device options
    --------------
    identifier {c26c3bce-5c99-11e1-a582-a4badbd9db87}
    description Ramdisk Options
    ramdisksdidevice partition=\Device\HarddiskVolume2
    ramdisksdipath \Recovery\WindowsRE\boot.sdi





    Waiting for your reply.
      My Computer
    Quote Quote

  11. Kaktussoft
    Posts : 10,796
    Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
       New #28

    the recovery didn't modify this:
    identifier {c26c3bcd-5c99-11e1-a582-a4badbd9db87}
    device ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    path \windows\system32\winload.exe
    description Windows Recovery Environment
    inherit {bootloadersettings}
    osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    systemroot \windows
    nx OptIn
    winpe Yes
    --------
    nor did it modify:
    Device options
    --------------
    identifier {c26c3bce-5c99-11e1-a582-a4badbd9db87}
    description Ramdisk Options
    ramdisksdidevice partition=\Device\HarddiskVolume2
    ramdisksdipath \Recovery\WindowsRE\boot.sdi

    These were linked together fine before recovery. And were linked find after recovery!!

    let me investigate further
      My Computer
    Quote Quote

  12. Kaktussoft
    Posts : 10,796
    Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
       New #29

    nicely linked now! please delete the ones that are useless first. I'll respond again in 10 minutes
    ussama said:
    bcdedit/enum all (enteries after using reagentc commands)


    Windows Boot Manager
    --------------------
    identifier {bootmgr}
    device partition=\Device\HarddiskVolume2
    description Windows Boot Manager
    locale en-US
    inherit {globalsettings}
    default {current}
    resumeobject {8d8f1553-2785-11e1-a176-a0a89368bcab}
    displayorder {current}
    toolsdisplayorder {memdiag}
    timeout 10

    Windows Boot Loader
    -------------------
    identifier {6425ee6e-5ca5-11e1-a48c-a4badbd9db87}
    device ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{6425ee6f-5ca5-11e1-a48c-a4badbd9db87}
    path \windows\system32\winload.exe
    description Windows Recovery Environment
    inherit {bootloadersettings}
    osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{6425ee6f-5ca5-11e1-a48c-a4badbd9db87}
    systemroot \windows
    nx OptIn
    winpe Yes

    Windows Boot Loader
    -------------------
    identifier {current}
    device partition=C:
    path \Windows\system32\winload.exe
    description Windows 7
    locale en-US
    inherit {bootloadersettings}
    recoverysequence {6425ee6e-5ca5-11e1-a48c-a4badbd9db87}
    recoveryenabled Yes
    osdevice partition=C:
    systemroot \Windows
    resumeobject {8d8f1553-2785-11e1-a176-a0a89368bcab}
    nx OptIn

    Windows Boot Loader
    -------------------
    identifier {c26c3bcd-5c99-11e1-a582-a4badbd9db87}=>useless now!
    device ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    path \windows\system32\winload.exe
    description Windows Recovery Environment
    inherit {bootloadersettings}
    osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{c26c3bce-5c99-11e1-a582-a4badbd9db87}
    systemroot \windows
    nx OptIn
    winpe Yes

    Resume from Hibernate
    ---------------------
    identifier {8d8f1553-2785-11e1-a176-a0a89368bcab}
    device partition=C:
    path \Windows\system32\winresume.exe
    description Windows Resume Application
    locale en-US
    inherit {resumeloadersettings}
    filedevice partition=C:
    filepath \hiberfil.sys
    debugoptionenabled No

    Windows Memory Tester
    ---------------------
    identifier {memdiag}
    device partition=\Device\HarddiskVolume2
    path \boot\memtest.exe
    description Windows Memory Diagnostic
    locale en-US
    inherit {globalsettings}
    badmemoryaccess Yes

    EMS Settings
    ------------
    identifier {emssettings}
    bootems Yes

    Debugger Settings
    -----------------
    identifier {dbgsettings}
    debugtype Serial
    debugport 1
    baudrate 115200

    RAM Defects
    -----------
    identifier {badmemory}

    Global Settings
    ---------------
    identifier {globalsettings}
    inherit {dbgsettings}
    {emssettings}
    {badmemory}

    Boot Loader Settings
    --------------------
    identifier {bootloadersettings}
    inherit {globalsettings}

    Hypervisor Settings
    -------------------
    identifier {hypervisorsettings}
    hypervisordebugtype Serial
    hypervisordebugport 1
    hypervisorbaudrate 115200

    Resume Loader Settings
    ----------------------
    identifier {resumeloadersettings}
    inherit {globalsettings}

    Device options
    --------------
    identifier {6425ee6f-5ca5-11e1-a48c-a4badbd9db87}
    description Ramdisk Options
    ramdisksdidevice partition=\Device\HarddiskVolume2
    ramdisksdipath \Recovery\WindowsRE\boot.sdi

    Device options
    --------------
    identifier {c26c3bce-5c99-11e1-a582-a4badbd9db87}=>useless now!
    description Ramdisk Options
    ramdisksdidevice partition=\Device\HarddiskVolume2
    ramdisksdipath \Recovery\WindowsRE\boot.sdi





    Waiting for your reply.
      My Computer
    Quote Quote

  13. ussama
    Posts : 17
    Windows 7 Home Premium x64
    Thread Starter
       New #30

    Ok investigate ;-)

    Please let me know If you find any solution.
      My Computer
    Quote Quote

 
Page 3 of 21 FirstFirst 1234513 ... LastLast

  Related Discussions
Hello, I have a Dell Inspiron N7110 with windows 7 home premium. I want to restore my computer to factory settings but whenever I hit f8 at startup and choose the "repair your computer" option, my computer just boots up normally. I've tried several times and it never works. Please help!
My HP G62-455dx laptop began crashing last week. I finally restored it to factory settings,now it will only start in safe mode. When I try to start window normally, it just "thinks' for 10 mins or so and then crashes (blue screen of death). I read several suggestions on this site, and have tried a...
Hi! I have Dell Studio 1749 with Windows 7 Home Premium. I want to start its built-in recovery but when after pressing F8, I click on Repair your computer .This option didnt work and windows 7 begins its loading. Kindly tell me any solution for this problem. Thanks
Hello, the other day i had a problem with my hp g56 laptop, it was using some start up file was missing. no big problem, i just used my recovery disks i got for hp.(cant use a new fresh install off a iso disk because my prodect key is wore off) it took about 1-2 hrs to do and everything went fine...
I have a Dell Studio 1440 with Win 7 home premium 64bit. I want to use the built-in recovery but after pressing F8, I click on Repair Your Computer and Windows 7 begins to load instead of going to the recovery GUI. I am trying to restore the system to it's factory settings and it had worked...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 01:42.
Find Us