Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 8-Core, overclocked machine slow...

20 Nov 2012   #51
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

I don't baby my SSD no more than I would baby a hard drive. Mine is warranted 5 years no mater how much I use it. If your SSD is made correctly it will last. I still don't recommend using a Ram Drive at least until you get your problem solved. I could run us all in circles.


My System SpecsSystem Spec
.
20 Nov 2012   #52
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

A RAM drive unless set up right will lose its data at every boot too. It can be set to write its data to a physical disk at boot and then re-write to the RAM disk. Where does the RAM disk write and read its data from?
My System SpecsSystem Spec
20 Nov 2012   #53
JoesMorgue

Windows 7 Ultimate x64/Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Britton30 View Post
A RAM drive unless set up right will lose its data at every boot too. It can be set to write its data to a physical disk at boot and then re-write to the RAM disk. Where does the RAM disk write and read its data from?
I made a disk image when I first set it up, it has folders in it and nothing else...

All data stored is either TEMP or cache, so it is not missed any time it is powered up again...

I never write new copies to the SSD
My System SpecsSystem Spec
.

20 Nov 2012   #54
JoesMorgue

Windows 7 Ultimate x64/Windows 8.1 Pro x64
 
 

New memory is installed.

I ran MemTest86+ one pass on each stick. All sticks were reported to be 400Mhz.

I ran OCCT, but I don't know how to read the results, havn't tried yet...
My System SpecsSystem Spec
20 Nov 2012   #55
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by JoesMorgue View Post
Quote   Quote: Originally Posted by Dave76 View Post
Nothing wrong with using what you paid for.

Did you make the BIOS adjustments?
Is it stable?
I made the adjustments. Ran the test, and I THINK it closed itself after it was done. [All I know is it didn't reboot]

This morning, I had a IE crash while playing a flash game that I play often, and don't remember a crash...

Stability is kinda Pot-Luck. I RARELY have a crash on the day it's booted...
Did you test with OCCT?
It makes a loud noise if it fails, hard to miss unless you are away from your computer.
Not sure if it will close itself after a certain time, as I usually keep a watch on stability tests.
Look in C drive > Users > (your user name) > My Documents > OCCT for the graphs it generates.
Post them all here.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

Post the CPUZ 'Memory' and 'SPD' tabs.
One pass of memtest86+ won't tell you much, better to install the RAM and see if it will boot.
Is your BIOS still set to run the RAM at 800MHz (actual 1600MHz)?
My System SpecsSystem Spec
21 Nov 2012   #56
JoesMorgue

Windows 7 Ultimate x64/Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Dave76 View Post
Quote   Quote: Originally Posted by JoesMorgue View Post
Quote   Quote: Originally Posted by Dave76 View Post
Nothing wrong with using what you paid for.

Did you make the BIOS adjustments?
Is it stable?
I made the adjustments. Ran the test, and I THINK it closed itself after it was done. [All I know is it didn't reboot]

This morning, I had a IE crash while playing a flash game that I play often, and don't remember a crash...

Stability is kinda Pot-Luck. I RARELY have a crash on the day it's booted...
Did you test with OCCT?
It makes a loud noise if it fails, hard to miss unless you are away from your computer.
Not sure if it will close itself after a certain time, as I usually keep a watch on stability tests.
Look in C drive > Users > (your user name) > My Documents > OCCT for the graphs it generates.
Post them all here.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

Post the CPUZ 'Memory' and 'SPD' tabs.
One pass of memtest86+ won't tell you much, better to install the RAM and see if it will boot.
Is your BIOS still set to run the RAM at 800MHz (actual 1600MHz)?
My memory is set at 1600 in BIOS. All my CPUZ info was posted earlier in this chat. [Page 4?]

I will post all the OCCT results later. My machine usually has it's sound off, because of location...
My System SpecsSystem Spec
21 Nov 2012   #57
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Do the CPUz snips from 4 days ago represent what you have now? You mentioned new memory.
My System SpecsSystem Spec
21 Nov 2012   #58
JoesMorgue

Windows 7 Ultimate x64/Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Do the CPUz snips from 4 days ago represent what you have now? You mentioned new memory.
It's the same brand/model of RAM [different revision]. Just all report the same speed now...

Here are the snips from OCCT from yesterday, AND Memory, SPD, and Graphics, taken a few minutes ago:
8-Core, overclocked machine slow...-2012-11-20-21h31-cpuusage-cpu-usage.png

8-Core, overclocked machine slow...-2012-11-20-21h31-fps-fps.png

8-Core, overclocked machine slow...-2012-11-20-21h31-frequency-bus.png

8-Core, overclocked machine slow...-2012-11-20-21h31-frequency-cpu-0.png

8-Core, overclocked machine slow...-2012-11-20-21h31-memory-usage-memory-used.png

8-Core, overclocked machine slow...-2012-11-20-21h31-temperature-core-0.png

8-Core, overclocked machine slow...-2012-11-20-21h31-temperature-core-1.png

8-Core, overclocked machine slow...-2012-11-20-21h31-temperature-core-2.png

8-Core, overclocked machine slow...-2012-11-20-21h31-temperature-core-3.png

8-Core, overclocked machine slow...-2012-11-20-21h31-temperature-core-4.png

8-Core, overclocked machine slow...-2012-11-20-21h31-temperature-core-5.png

8-Core, overclocked machine slow...-2012-11-20-21h31-temperature-core-6.png

8-Core, overclocked machine slow...-2012-11-20-21h31-temperature-core-7.png

8-Core, overclocked machine slow...-2012-11-20-21h31-temperature-cpu.png

8-Core, overclocked machine slow...-2012-11-20-21h31-voltage-3.3v.png

8-Core, overclocked machine slow...-2012-11-20-21h31-voltage-5v.png

8-Core, overclocked machine slow...-2012-11-20-21h31-voltage-12v.png

8-Core, overclocked machine slow...-2012-11-20-21h31-voltage-cpu-vcore.png

8-Core, overclocked machine slow...-2012-11-20-21h31-voltage-vin3.png

8-Core, overclocked machine slow...-2012-11-20-21h31-voltage-vin4.png

8-Core, overclocked machine slow...-2012-11-20-21h31-voltage-vin6.png

8-Core, overclocked machine slow...-2012-11-20-21h31-voltage-vin7.png

8-Core, overclocked machine slow...-2012-11-20-21h31-voltage-vin8.png

8-Core, overclocked machine slow...-memory.png

8-Core, overclocked machine slow...-spd.png

8-Core, overclocked machine slow...-graphics.png


My System SpecsSystem Spec
21 Nov 2012   #59
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by JoesMorgue View Post
Quote   Quote: Originally Posted by Britton30 View Post
Do the CPUz snips from 4 days ago represent what you have now? You mentioned new memory.
It's the same brand/model of RAM [different revision]. Just all report the same speed now...
So the answer is no?
My System SpecsSystem Spec
21 Nov 2012   #60
JoesMorgue

Windows 7 Ultimate x64/Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Quote   Quote: Originally Posted by JoesMorgue View Post
Quote   Quote: Originally Posted by Britton30 View Post
Do the CPUz snips from 4 days ago represent what you have now? You mentioned new memory.
It's the same brand/model of RAM [different revision]. Just all report the same speed now...
So the answer is no?
Actually, I thought they would be the same, but TO BE SURE, I included new ones and added Graphics. [Didn't compare before/after]
My System SpecsSystem Spec
Reply

 8-Core, overclocked machine slow...




Thread Tools




Similar help and support threads
Thread Forum
AutoCAD 2007 on Virtual XP Machine -- multi-core CPU not recognized?
Hi, Recently, I installed a VM XP Machine, on which I've been using AutoCAD 2007, which runs nicely. The one issue I have relates to the RENDER command. On my late true XP machine (Pentium 4 with Hyperthreading), AutoCAD RENDER took advantage of both threads. One saw two "tiles" scamper...
Virtualization
Slow Pc high core usage
I don't know but recently I am facing this wierd issue since a few days. See screenshots below http://i.imgur.com/1qcePbR.jpg http://i.imgur.com/DqnyCaa.jpg As you can see that the process svchost.exe is using way too much memory and you can also see in the second screenshot that all my...
Performance & Maintenance
Core 'explorer' process extremely slow
Haven't had any problems with this laptop in over a year. Came in this morning and it was locked up. Rebooted and it went to safe mode, things looked fine. Rebooted and laptop let me log in and seemed to be extremely slow, didn't finish bringing windows completely up. rebooted with repair...
General Discussion
6 core computer so slow to load.
Hey People I recently bought an AMD 6 core pc It's really slow to load, it takes a good 3 minutes to load, and theres hardly anything to load, where as my dual core laptop loads just as fast :/ Why is this? Thanks
General Discussion
Intel Gives Core i3, Core i5 Dual-Core Processors K0 Stepping Update
more..
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:12.
Twitter Facebook Google+