Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC/Scannow errors

05 Oct 2013   #1
willburstyle06

NY
 
 
SFC/Scannow errors

I'm having trouble installing Windows 7 Service Pack 1 KB976932, after downloading the update on reboot it says updated failed and reverts changes. I ran a SFC/Scannow command and the following two errors came up as un-fixable.

2013-10-04 23:16:21, Info CSI 0000003d [SR] Beginning Verify and Repair transaction
2013-10-04 23:16:21, Info CSI 0000003f [SR] Cannot repair member file [l:18{9}]"bfsvc.exe" of Microsoft-Windows-BootEnvironment-Servicing, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:16:22, Info CSI 00000042 [SR] Cannot repair member file [l:18{9}]"bfsvc.exe" of Microsoft-Windows-BootEnvironment-Servicing, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:16:22, Info CSI 00000043 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2013-10-04 23:16:22, Info CSI 00000046 [SR] Could not reproject corrupted file [ml:520{260},l:28{14}]"\??\C:\Windows"\[l:18{9}]"bfsvc.exe"; source file in store is also corrupted
2013-10-04 23:16:22, Info CSI 00000048 [SR] Verify complete






2013-10-04 23:17:38, Info CSI 00000156 [SR] Beginning Verify and Repair transaction
2013-10-04 23:17:38, Info CSI 00000158 [SR] Cannot repair member file [l:26{13}]"fveupdate.exe" of Microsoft-Windows-SecureStartup-BootServicing-Utility, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:17:38, Info CSI 0000015a [SR] Cannot repair member file [l:26{13}]"fveupdate.exe" of Microsoft-Windows-SecureStartup-BootServicing-Utility, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:17:38, Info CSI 0000015b [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2013-10-04 23:17:38, Info CSI 0000015e [SR] Could not reproject corrupted file [ml:520{260},l:28{14}]"\??\C:\Windows"\[l:26{13}]"fveupdate.exe"; source file in store is also corrupted
2013-10-04 23:17:39, Info CSI 00000160 [SR] Verify complete






These errors were in the sfcdetails notepad created. Any ideas how to fix them.


My System SpecsSystem Spec
.
05 Oct 2013   #2
MilesAhead

Windows 7 32 bit
 
 

Do you have a Restore Point previous to the one made by the SP install? If that doesn't work you may have to do a repair install.

edit: if possible I would make a backup image to an external drive first. Always set up if you can to get back to where you are currently. Otherwise you can go down a slippery slope until the system is unusable. Hopefully not but it's good to be prepared with a bail out strategy.
My System SpecsSystem Spec
05 Oct 2013   #3
willburstyle06

NY
 
 

I was hoping to be able to replace these two files fveupdate.exe and bfsve.exe from another clean windows version. Can anyone tell me what those two files are? I'm pretty sure they are related to my inability to install windows servicepack1
My System SpecsSystem Spec
.

06 Oct 2013   #4
willburstyle06

NY
 
 

I was able to repair the fveupdate.exe by replacing it in the command line by and extracted fveupdate.exe file from an windows 7 dvd. The bfsve.exe file even after being replaced was still corrupt. I ran sfc/scannow and only the bfsve.exe error is left. Can someone please tell me what the bfsve.exe file is and how to fix it?
My System SpecsSystem Spec
Reply

 SFC/Scannow errors




Thread Tools




Similar help and support threads
Thread Forum
Help With About (4) SFC /Scannow Errors Windows 7 Pro 64-bit SP1
This is my 1st post on this forum, so I'll try to be concise, and not break any forum rules (unintentionally). I'm having some trouble in obtaining a "clean" SFC that will complete 100% with no errors. I recently had the somewhat common "telemetry" error files. Fortunately, I was able to fix...
Performance & Maintenance
How do I fix errors from SCANNOW's CBS.log?
Hello, I'm new here- I've been going through a few problems with my computer. When I run SFC /Scannow I get errors the system is unable to fix, and are detailed in a CBS.log. I've added the CBS.log to my post, but how to I fix the errors? I do have my installation discs, if that's any help. ...
Performance & Maintenance
SFC /SCANNOW Errors + Unable To Fix
Recently I been getting BSODs here and there. Some of the errors were dxgmms1.sys and the latest one was memory management. I ran sfc /scannow from cmd (I did right click and select run as admin) and it found some errors and said it was unable to fix them. I ran sfc 3-4 times and it still couldn't...
Performance & Maintenance
Did sfc /scannow have errors.
So I did the sfc /scannow on my wifes puter. Got to 2% and had errors the scan stopped and that the errors could not be fixed. I looked at the log and am not sure what this means. I am using Windows 7 home premium. Thanks for any help.
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:32.
Twitter Facebook Google+