Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Chkdsk Turns Itself Off At Boot

29 Jan 2014   #1
schmieg

Windows 7 Professional x64
 
 
Chkdsk Turns Itself Off At Boot

I recently developed a quirk on one of my systems. All are running Windows 7 Pro and running on a wired home network through a Netgear WNDR4500. On one machine, a Lenovo, if I tell it to run chkdsk on the C: drive at the next boot, it will seem to take the command properly. At the next boot, it will show the chkdsk message to hit a key if I want to abort. No key is hit, but it will suddenly abort as if one was and then resume the boot process.

Now the stranger part. If I tell it two different ways to run chkdsk (say once using the Properties/Tools in My Computer and then once from the command line), it will fail the same way and then turn around and run it a second time successfully.

This is a bit irritating and I'm wondering if something has become corrupted, though I can't find any problems. Does anyone have an explanation for this behavior and, hopefully, a remedy short of reinstalling 350 gig of operating system, applications and data?


My System SpecsSystem Spec
.
29 Jan 2014   #2
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

I really don't have a answer to your problem but this might help and can't hurt. Please read completely.

By Brink?
SFC /SCANNOW Command - System File Checker
My System SpecsSystem Spec
29 Jan 2014   #3
schmieg

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Layback Bear View Post
I really don't have a answer to your problem but this might help and can't hurt. Please read completely.

By Brink?
SFC /SCANNOW Command - System File Checker
I tried that, but no joy. It does indicate corrupted files that it cannot repair. The system runs perfectly except for this chkdsk issue though and I hate to start over without serious operational problems as it ties up a couple of days to get it all done.
My System SpecsSystem Spec
.

29 Jan 2014   #4
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

You have problems with Windows 7 System Files. If they don't bother you it's okay with me also.
Have a nice day.
My System SpecsSystem Spec
Reply

 Chkdsk Turns Itself Off At Boot




Thread Tools




Similar help and support threads
Thread Forum
CHKDSK Occuring in Win 7 boot for Dual Boot win7/win10 computer
Hello everyone, I have a Dell Optiplex 760 SFF that has both win 7 and win 10 installed on a 1TB hard drive in the following partition order: 500 mb system reserve, 100gb win 7, 750gb data, 80gb win 10 I've also disabled the metro bootloader, as it wastes times when booting to win 7. Whenever...
Performance & Maintenance
CHKDSK evry boot
Hi I have two hard disk. In the first hdd i install windows 10 and Second hdd install windows 7.When i boot to windows 10 and restart pc and boot to windows 7 CHKDSK do for all partition .This CHKDSK is long time. Plz help me what do i for disable or resolution for this problem. I am so...
Performance & Maintenance
my laptop turns out suddenly shortly after boot
Hi, my laptop crashes shortly after logon window or startup but not in safe mode. I tried sysconfig but didnt get any result. I dont know which program or service is the cause.I reinstalled windows but the problem persists. in one of these crashes I got driver-rql-not-less-or-equal blue...
BSOD Help and Support
My second monitor works on boot up but then turns black!
Hi there I recently upgraded to have two monitors for my pc. My graphics card is the AMD radeon hd 7770 and I have a Benq GL2250 and a Samsung S22B150. On first setup everything was fine with my first monitor (Benq) plugged in via vga from the monitor into a vga to which I think is a dvi-i...
Graphic Cards
Graphic turns off on boot up
Help please. I have a windows 7 os that on bootup gets to the logo then it turns the monitor off so that it says no signal. I can hear the sound of it booting up...no signal. This is a 30 day old build that has been working perfectly. I used the onboard graphics card...same results. Everything...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:20.
Twitter Facebook Google+