How do I test ram using MepamTest86+?
-
How do I test ram using MepamTest86+?
As many people say, they test each individual RAM for 7-10 hours and paired (testing both rams). Is this how you're suppose to test your ram?
How do you test your ram to ensure that it's not defective?
-
-
Download and run MemTest86+ to test your RAM.
Note
Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
RAM - Test with Memtest86+
-
Which do I use?
PRESS F1 for FAIL SAFE MODE
PRESS F2 for MULTI-THREADING (SMF)
In that case, I have it running on default (f1 failsafe mode) and I don't feel comfortable running memtest86+ for many hours. The cpu temp reads 75C.
Last edited by WindowsOP; 25 Jun 2014 at 01:08.
-
-
OK, one more time,
Will you please do everyone a favor and fill in your specs correctly.
System Info - See Your System Specs
You don't need to bookmark it, just run the tool and fill in the blanks.
Your OS says "California" it should say Windows 7 (Version & bit)
You also have something Sony listed but are now talking about a Dell.
Fill in as much as you can so we don't have to ask every time, it will show at the bottom left of every one of your posts.
-
OK, one more time,
Will you please do everyone a favor and fill in your specs correctly.
System Info - See Your System Specs
You don't need to bookmark it, just run the tool and fill in the blanks.
Your OS says "California" it should say Windows 7 (Version & bit)
You also have something Sony listed but are now talking about a Dell.
Fill in as much as you can so we don't have to ask every time, it will show at the bottom left of every one of your posts.
I have many laptop around the house including apple mac book. It doesn't let me include more than one laptop on my profile. I will try to think of a solution on how to include another laptop in my system spec profile. Perhaps I enter it under (Other Info)?
I will update tomorrow when am back from sleeping.
Thank you'
Edit: I am using the latest version memtest86+