Show Us Your WEI

Page 61 of 300 FirstFirst ... 51596061626371161 ... LastLast

  1. Posts : 1,086
    Windows 7 Ultimate x64.
       #601

    Thorn8369 said:
    And yeah, the video drivres win7 throws at ya dont quite perform as good as the latest Vista drivers from Guru3d.com. Plus, the Win7 drivers wont allow you to OC with RivaTuner
    Oh yes they do, both in x86 and x64 mode.
      My Computer


  2. Posts : 12
    Windows 7
       #602

    Mine as below. It's seem like the highest is cap at 5.9

      My Computer


  3. Posts : 458
    Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
       #603

    bloke said:
    my acer travelmate 2480 (with some hdd bad sectors)
    Vista ult x32 but will be putting win7 on it eventually and upgrade the hdd and dvdrom.
    Attachment 6548
    my travelmate now with 7057 x32! soo much faster than vista with the same program on it, and not just boot up times either, the whole o/s and software run and load quicker! sweet!
    Show Us Your WEI-screen01.jpg
      My Computer


  4. Posts : 2,899
    Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
       #604

    my wei with 4gb Dual Channel (3.75 usuable as 256 is used for graphics...)
    Show Us Your WEI-wei.png
    still pretty good up...:)
      My Computer


  5. Posts : 6
    windows7 7057 64-BIT
       #605

    help anyone...

    don't know if this the correct thread to post this.

    I can't seem run WEI successfully in windows 7. I always get BSOD. In vista i have no problem running it.

    keep getting this error: Show Us Your WEI-untitled.jpg

    running 790gx & 3450 in hybrid crossfire. already updated to latest 9.3 driver. window 7 was clean installed 3 times already. even on the default windows 7 driver it won't run.

    p.s. My 3D CAD app Solidworks 2008 and 2009 works just fine in windows 7.

    thanks in advance.
    Last edited by vader72; 28 Mar 2009 at 21:13. Reason: additional info
      My Computer


  6. Posts : 458
    Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
       #606

    vader72 said:
    help anyone...

    don't know if this the correct thread to post this.

    I can't seem run WEI successfully in windows 7. I always get BSOD. In vista i have no problem running it.

    keep getting this error: Show Us Your WEI-untitled.jpg

    running 790gx & 3450 in hybrid crossfire. already updated to latest 9.3 driver. window 7 was clean installed 3 times already. even on the default windows 7 driver it won't run.

    p.s. My 3D CAD app Solidworks 2008 and 2009 works just fine in windows 7.

    thanks in advance.
    your running 2 different model cards in crossfire? maybe take the older one of the 2 out and then try it? i had prblems with quad sli in my setup, but when i remove the sli bridge it works just fine, maybe your problem is similar. i would remove the 790gx and just try wth 3450 (not a bit ati fan but is the 790gx older?)

    see if that can help.

    also your error should show a part in the log with something like error code: 0x033 or something like that, you need that code and the faulting module (file name like ntfs.dll or something like that) when the BSOD comes up.

    every time it BOSD is it the same code and fault?
      My Computer


  7. Posts : 13
    Windows 7
       #607

    Brink said:
    Here's mine.

    Attachment 318

    UPDATE: New WEI score here instead.

    How do you increase your shared memory by that much? Mine is
    Attached Thumbnails Attached Thumbnails Show Us Your WEI-my-wei.jpg  
      My Computer


  8. Posts : 2,899
    Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
       #608

    hello LoVac and welcome
    you are running a 8800 series while brink is running a 9600 series...
    that is the reason for the change in shared memory...

    bloke said:
    your running 2 different model cards in crossfire? maybe take the older one of the 2 out and then try it? i had prblems with quad sli in my setup, but when i remove the sli bridge it works just fine, maybe your problem is similar. i would remove the 790gx and just try wth 3450 (not a bit ati fan but is the 790gx older?)

    see if that can help.

    also your error should show a part in the log with something like error code: 0x033 or something like that, you need that code and the faulting module (file name like ntfs.dll or something like that) when the BSOD comes up.

    every time it BOSD is it the same code and fault?
    at this moment its has to be hardware related...
    hybrid crossfire is not really ready (as far as i have seen...)
    and so i believe the ati driver would be the cause for this (as hybrid crossx is not stable even in 9.3)

    also the 790gx is a integrated graphics....
    because im running the mobile version of the 780 series and the way it works is the hd3200 and a separate graphic running in crossfire ...
    i believe its the same for the 790 series...
    all he need to do is to disable it in the motherboard....
    and it wont any difference if it was enabled...
    it seems the wei benchmarks only one GPU and as such you wont see any change but having them even in crossfire...
      My Computer


  9. Posts : 6
    windows7 7057 64-BIT
       #609

    darkassain said:
    hello LoVac and welcome
    you are running a 8800 series while brink is running a 9600 series...
    that is the reason for the change in shared memory...



    at this moment its has to be hardware related...
    hybrid crossfire is not really ready (as far as i have seen...)
    and so i believe the ati driver would be the cause for this (as hybrid crossx is not stable even in 9.3)

    also the 790gx is a integrated graphics....
    because im running the mobile version of the 780 series and the way it works is the hd3200 and a separate graphic running in crossfire ...
    i believe its the same for the 790 series...
    all he need to do is to disable it in the motherboard....
    and it wont any difference if it was enabled...
    it seems the wei benchmarks only one GPU and as such you wont see any change but having them even in crossfire...
    i just disabled hybrid crossfire from ati cc and run WEI with just my discrete HD3450. same BSOD. i'll try to disable the m/b 3300 in the bios as per your suggestion and run it again.

    at bloke: i'll take note of the error code on BSOD next time i run wei.

    thanks for all your inputs.
      My Computer


  10. Posts : 6
    windows7 7057 64-BIT
       #610

    Show Us Your WEI-hd3300.jpg

    finally. however, the result is with the integrated vid HD3300. the discrete vid HD3450 still resulted in bsod even after disabling the HD3300 in the bios.

    also, there was no error code or faulting module (xxx.dll) on the bsod. just the bug check code that i have posted earlier. all resulted in BCC: 1000000ea.

    anyway, thanks for the inputs. i'll investigate some more why the my discrete vid is having problem. it's older than the integrated HD3300 so its driver should have been more mature.
      My Computer


 
Page 61 of 300 FirstFirst ... 51596061626371161 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:57.
Find Us