Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 64Bit 7 not using all 4GB of ram

08 Nov 2009   #31
Frostmourne

Windows 7 Ultimate x86-64
 
 

Memory addresses have to be mapped and the gpu takes some of that - clear?


My System SpecsSystem Spec
.
09 Nov 2009   #32
Tieske

Windows 7 Ultimate X64 NL
 
 

Come on people let's be nice to each other. It makes no sense to piss each other off
My System SpecsSystem Spec
09 Nov 2009   #33
Prefontaine

Windows7
 
 

Windows 7 64bit, Asus A8n32sli-deluxe find that thread on general discussion. I had the same problem. Enabled the memory hole? I think. It's a bios setting read the thread it's there.
My System SpecsSystem Spec
.

19 Dec 2009   #34
lbjgh

windows 7
 
 

I've got Win7-64bit installed on a Gigabyte EP45-UD3P with a Q9550 and 4GB or memory.

Win7 shows that only 3GB is usable... how do I fix this problem? Vista64 used all 4GB of memory with exactly the same hardware!
My System SpecsSystem Spec
20 Dec 2009   #35
zzz2496

Windows7 Ultimate 64bit
 
 

@intelfan00

Look into your mainboard's BIOS, see if you can completely disable the integrated intel graphic chip.
If you can't disable it, at least configure it to use as minimum memory as possible.

See how it goes...

@lbjgh

Where/how do you see --> "3GB is usable"? I'm currently searching in my own Windows7, it doesn't say anywhere about "3GB usable"...
My System SpecsSystem Spec
21 Dec 2009   #36
Frostmourne

Windows 7 Ultimate x86-64
 
 

Quote   Quote: Originally Posted by zzz2496 View Post
@intelfan00

Look into your mainboard's BIOS, see if you can completely disable the integrated intel graphic chip.
If you can't disable it, at least configure it to use as minimum memory as possible.

See how it goes...

@lbjgh

Where/how do you see --> "3GB is usable"? I'm currently searching in my own Windows7, it doesn't say anywhere about "3GB usable"...
Probably msinfo32.exe.
My System SpecsSystem Spec
Reply

 64Bit 7 not using all 4GB of ram




Thread Tools




Similar help and support threads
Thread Forum
BSOD Winxp 64bit, Win7 Pro 64bit many error codes
Hi every one, i have this machine which is causing too much headache for me, this machine was having Windows XP 64 Bit, and it had a lot of BSOD crashes, then i just decided that it's the time to make the move to Windows 7 for this high performance machine, since i was not able to upgrade to...
BSOD Help and Support
Cant install 64bit even though my processor is 64bit capable.
Hey, I have searched all over the internet and found no solution to my problem. But considering my situation I am sure there must be a solution so here goes. Short story: My pc says its 64bit capable but it doesn't seem to be able to recognize any 64bit install disks. What should I do? ...
Installation & Setup
Twinhan DVB card driver works in Vista 64bit but not 7 64bit HELP HELP
Hello I have a DVB card called Twinhan 1025 Twinhan company is gone so they dont provide new drivers the driver we have is for Vista 64bit which works well with RAM more or less than 4 GB but in Windows 7 64bit it works with only RAM less than 4 GB :confused::confused: My RAM is 6 GB when...
Drivers
MathType add-in not working for 64bit MS Office 2010 64bit
Hi, Just got into the flavour of windows 7 for a couple of days and I'm lovin' it. Now, I installed Microsoft Office 2010 Professional Plus 64 bit on my system. Then I tried to use the Mathtype plugin 6.6a, but I cannot make it to work. What I've done so far: 1. Installed MS Office 2010...
Microsoft Office
Adobe Photoshop 64bit freezes on 64bit windows
getting frustrated as since i got windows 7 both Adobe Photoshop cs4 and Grass Valley Edius keep freezing. Edius usually only will freeze for 10 seconds then rectify but photoshop is freezing often.. especially after the pc has idled, and nothing can rectify it, so im losing work help!
BSOD Help and Support
Upgrading from 7232 64bit to 7264 64bit problems.
Guys, I'm have some difficulties in upgrading. I keep on getting the following message, I tried running the setup in compatibility mode, but same thing. I also tried changing the cversion.ini file. Same. Hope someone can give me some advise. Thanks!!
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:04.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App