![]() |
|
09 May 2015 | #1 |
|
Reliability monitor does not work any more since 22.04.15
I have Windows 7 Ultimate x64 installed on my self built PC. A month ago I did a clean reinstall due to BSOD's since then no more BSOD's but the reliability monitor stopped working on the 22.04.15, and I can't find out how to get it going again I have gone through all the systems settings and admin tools but no joy. Can anybody tell me how PLEASE
![]() |
My System Specs![]() |
. |
|
09 May 2015 | #2 |
|
Hello Lenn, and welcome to Seven Forums.
You might see if resetting Reliability Monitor may help to get it working again. ![]() Reliability Monitor - Reset |
My System Specs![]() |
09 May 2015 | #3 |
|
Sorry Brink IT DID IN FACT FIX IT all seems fine I will just to wait until to Tomorrow to see if it collects data. Thank you very much......lennmann
|
My System Specs![]() |
. |
|
09 May 2015 | #4 |
|
Great news. Please let us know how it went.
![]() |
My System Specs![]() |
10 May 2015 | #5 |
|
So far it is still blank but the notice says that it will take a while til enough data is gathered to rate the performance. It is still less than 24 hours since I reset it,but I will keep you posted as to how it goes....Best Regards....LENNMANN
|
My System Specs![]() |
15 May 2015 | #6 |
|
Hi brink,
Still no joy with reliability monitor I have gone through Admin Tools-Services and checked all that I could find to do with performance or error monitoring are started and started those that were not. Altered one to do with fault monitoring from manual to automatic so far nix. best regards..Len Mann |
My System Specs![]() |
15 May 2015 | #7 |
|
I'm sorry to hear that. It will then usually take a repair install or clean install to fix it.
![]() |
My System Specs![]() |
16 May 2015 | #8 |
|
Hi Brink, I'm sorry too as I only did clean install about a month ago because of too many BSODs. The clean install took care of them almost completely except the Elton USB3 driver with my motherboard was old and windows didn't like it. But Windows update fixed that so after a reg clean then a sfc scan all seemed ok until reliability monitor stopped working. Its a b...... a clean Windows install is quick and easy but its all the other programs that have to be re installed and reactivated that takes a lot of time but thank you for your help it could and should have worked.
All the Very Best LenM... PS I will try the repair install first and hope works |
My System Specs![]() |
19 May 2015 | #9 |
|
Hi Brink, did a repair install and it still did not work but I found out you must turn on reliability monitor before it will work after a reset or repair install. From Control Panal-Adim Tools-Task Scheduler-Microsoft-RAC- and enable RACTask as it will be left as disabled after a reset et al then hope like hell it works, but confidence never hurts. In any case I wont give up till I get the Bas....... of a thing going. I WILL LET YOU KNOW IF DOES WORK IT MAY help others
ALL the Very Best......LenM |
My System Specs![]() |
19 May 2015 | #10 |
|
Fingers crossed to avoid a clean install.
|
My System Specs![]() |
![]() |
Thread Tools | |
Similar help and support threads | ||||
Thread | Forum | |||
Reliability Monitor Hi all, Just curious if anyone can tell me how reliability viewer is setup to view on remote win7 PC's. I can go into Perfmon and connect to a remote PC, but when I right click on monitor to view reliability report it just opens my local machine report. The RAC task is running on all PC,... |
Performance & Maintenance | |||
Reliability Monitor Don't Get I had Google App do something funny on me today and look around and found out my computer been having two problems but I didn't know what the issues are. So I look in my Reliability Monitor and found two problems Compatibility Appraiser -> I think is from an update and uninstall all Windows 10... |
Performance & Maintenance | |||
Reliability Monitor i have just realized that the Reliability Monitor has stopped updating on my machine i have looked at the settings but it looks ok what is the best way to reset it and get it up and running again? |
Performance & Maintenance | |||
Reliability Monitor View Reliability and Problem History with Reliability Monitor in Windows 7 and Windows 8 This tutorial will show you how to open and use Reliability Monitor to review reliability and problem history to help resolve issues in Windows 7 and Windows 8. Reliability Monitor is an advanced tool... |
Tutorials | |||
Reliability Monitor The Reliability Monitor of Windows 7 is a very handy tool for monitoring the history of when which applications have failed. Being a developer, it is to be expected that applications that are "In-Development" will cause problems, which in turn negativly affects the scores of the Windows... |
Performance & Maintenance |
Our Sites |
Site Links |
About Us |
Find Us |
Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd All times are GMT -5. The time now is 07:01. |
![]() ![]() ![]() ![]() ![]() |