Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Recent rebuild, but getting errors in Event viewer

06 Jun 2015   #1
Pitbull69

Windows 7
 
 
Recent rebuild, but getting errors in Event viewer

Recently rebuilt my computer, Installed a new SSD drive and new Motherboard,

sometimes when I boot the PC up I get a rgey square over my recycling bin, and it wont go away, unless I click on it, which then turns the screen 90 Degrees, not the end of the world but annoying,

Also when I boot up, once it gets to my home screen it seems to lag a little then flash, once it flashes it seems ok, again, not the end of the world but annoying, and dont want these issues to be something that become a bigger issue later,

I just checked my event log, and its full of errors, bnow forgive me as I have never used this before, so havent the foggiest what it means or if I should be worried,

I tried googling a few of the error codes but most draw a blank unless im copying the wrong part,

could anyone point me in the right direction with them, or tell me if I shouldnt be wrried about them

Recent rebuild, but getting errors in Event viewer-event-viewer.jpg




My System SpecsSystem Spec
.
06 Jun 2015   #2
Tookeri

Windows 7 Pro 32
 
 

I get Schannel errors sometimes and they are related to HTTPS sites when using Internet Explorer. I try to use Firefox as much as possible.

You can double click a message to view the details. For the "Application error" that will be useful to find out what program crashed, while probably not so useful for the Schannel errors.
My System SpecsSystem Spec
07 Jun 2015   #3
Pitbull69

Windows 7
 
 

thanks application error was my driod cam, was more concerned about the Schannel errors, I do use firefox, but also use UC browser, but im guessing from the way you replied these errors/faults are nothing to worry about ?

was also these that worried me, the kernel-pnp when I click on it I get this message The driver \Driver\WUDFRd failed to load for the device USB\VID_0FCE&PID_01BA\CB5A249HUY.
My System SpecsSystem Spec
.

07 Jun 2015   #4
Tookeri

Windows 7 Pro 32
 
 

About the Schannel errors I'd try and investigate why and where you get them. I've read they can relate to the use of Outlook and Skype for example, but in my case it was related to certain HTTPS sites when using Internet Explorer 11.

Schannel(secure channel) handles encrypted traffic over port 443(https). In my case some web sites I use don't fully work with TLS 1.2 in IE11 so they fallback on other perhaps less secure ciphers and that can trigger schannel errors. Info on IE11 and TLS 1.2: IE11 Automatically Makes Over 40% of the Web More Secure While Making Sure Sites Continue to Work - IEBlog - Site Home - MSDN Blogs

If you look at the details of a schannel error this can explain it more, if it's related to TLS/SSL and what version etc:
https://msdn.microsoft.com/en-us/lib...=vs.85%29.aspx

Unfortunately it's not easy tracking these errors to determine if they can be solved or ignored. I don't use IE11 that much anymore. That's my solution.

I get the Kernel-PnP too sometimes but they are only a warning compared to errors. Related to removal of USB devices and can be safely ignored I think.
My System SpecsSystem Spec
Reply

 Recent rebuild, but getting errors in Event viewer




Thread Tools




Similar help and support threads
Thread Forum
Event errors (11, 7000, 7026), intellipoint and event viewer freeze.
Hi, keep getting the errors above every startup regarding; 11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications." 7000 - "The Crypkey License service...
General Discussion
Event Viewer Errors
Im still getting some errors and warning in event viewer. how can I resolve these errors? Log Name: System Source: Microsoft-Windows-Kernel-PnP Date: 11/3/2013 12:05:07 AM Event ID: 219 Task Category: (212) Level: Warning Keywords:
Performance & Maintenance
Event viewer errors
I recently called two separate tech support people who remotely accessed my computer, and used the event viewer. Inthis, they showed me that in the application list, there were 36,246 entries, and in the system catagory, 58,424 entries, with lots of errors. They also said that I would need level 3...
Performance & Maintenance
WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)
Hi, I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating" Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words)...
Hardware & Devices
Two errors in Event Viewer
Hello SF! I have two errors constantly being registered every time reboot(or turn on) my computer that i cant resolve: The first one is a Event 3006 LoadPerf: And a second one a Event 1530 User Profile Settings:
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:51.
Twitter Facebook Google+