Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Shutdown-Always applying 18 updates

11 Nov 2009   #1
burn

Windows 7
 
 
Shutdown-Always applying 18 updates

Hi All,

I have installed Windows-7 Home Premium on my Sony Viao vgn-fw490 notebook without any issues. But, whenever I perform shutdown, it applies 18 updates and I have to wait for it to finish for 10 minutes. This happens always.
How can I fix this issue?

Thanks,
~Vikram


My System SpecsSystem Spec
.
11 Nov 2009   #2
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

Rather unique problem. If it were me, the first thing I would do is to use system image to restore to a point prior to the downloads. When your image is installed, you will get all the downloads again. Make sure that you are set to install manually. Then install one at a time. If you do not have a system image for that period, you can use system restore and go back to a point prior to the first installation and then go through the same procedure. Finally, if that does not work you can try to uninstall, through the updater and then reinstall the way that I mentioned. These are the three ways that I know, chose the order that makes you the most comfotable.
My System SpecsSystem Spec
11 Nov 2009   #3
travisrox5

windows 7
 
 

i am not 100% sure but in control panel
-system
-updates
change the settings to never update or a nother setting
My System SpecsSystem Spec
.

Reply

 Shutdown-Always applying 18 updates




Thread Tools




Similar help and support threads
Thread Forum
Shutdown button with updates warning symbol, but no updates
Hi The shutdown button on my PC has the yellow update warning symbol. But when I shut down the PC, no updates happends, and the next time Im gonna shut it down, the update symbol is still there Also my father living many miles away from me has the same problem. He also has windows 7, but...
Windows Updates & Activation
Applying Updates Not Applying
Will the SURT tool work on remote machines? I ask because I don't see failure messages on machines I patch with WMIC or using DISM. What I DO find is that 500+ machines do NOT have the MS15-046 patch (3054834) after I have applied it, 3 times now, over the past week with reboots of the machines.
Windows Updates & Activation
Windows 7 Slipstream - Order to applying updates?
Hey everyone, I'm preparing for a Windows 7 slip stream install using RT 7 Lite following this tutorial: https://www.sevenforums.com/tutorials/145343-slipstream-windows-7-sp1-into-installation-dvd-iso-file.html Does anyone who has experience with this know if there's a required order to...
Installation & Setup
Windows 7 - Fresh Install BSOD whilst applying windows updates
I built up a new PC before Christmas. These were the components: Asus P8Z77-V Motherboard Intel i5 3570K 3.4GHz 2 x G-Skill 8GB DDR3 1600Mhz PowerColor HD 6870 1GB GDDR5 Dual DVI HDMI PCI-E Graphics Card OCZ 120GB Agility 3 SSD Not really used it that much and have had random crashes...
BSOD Help and Support
Build 7100 REALLY slow after applying updates
I have HP 6930P with 4gb ram and Intel SSD drive. It was really fast with beta version of the Windows Seven. After I formatted the drive and installed Build 7100 everything worked fine. I used it for two days and today I installed all the updates. Everything is REALLY slow. I tried to uninstall...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:21.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App