Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Black screen with cursor immediately following Windows logo

02 Sep 2015   #21
AndyR25

Windows 7 Home Premium 64bit
 
 

I tried again and even fewer of the files were collected. So if you can't make do with the first ZIP I sent, I will have to try a different approach.


My System SpecsSystem Spec
.
02 Sep 2015   #22
AndyR25

Windows 7 Home Premium 64bit
 
 

I actually found the poqrpog.sys file, and it IS a component of GMER. So therefore, the one BSOD from earlier (which I am not able to replicate) must have been something completely different. The BSODs whose dumps I collected are not the fault of Windows alone, and therefore are probably not related to the original problems of the hanging startup and the slow file system.

I did download the manufacturer's disk testing utility, which checked all sectors (about a billion of them, it took almost 3 hours) and did not find any bad sectors.
My System SpecsSystem Spec
03 Sep 2015   #23
GokAy

Windows 7 Ultimate x64 SP1
 
 

At the moment I can only think of a Repair Install - Repair Install
My System SpecsSystem Spec
.

18 Sep 2015   #24
blablubi

Windows 7 64 bit professional
 
 

In my case it was update KB3055642. Removed it and disabled it and windows was fine again.
Hope that will help someone, had to try different combinations of updates to find out.
My System SpecsSystem Spec
Reply

 Black screen with cursor immediately following Windows logo




Thread Tools




Similar help and support threads
Thread Forum
Black screen after windows logo
Howdy friends My PC specs ASUS M5A78L-M/USB3 Mobo AMD FX 6100 CPU Corsair Vengeance 8GB DDR3 Crucial MX 100 - 250 GB SSD Seagate 500 GB + 160 GB HDD ATI Radeon HD 5450 1 GB GPU
Performance & Maintenance
Black screen with cursor after Windows Logo, takes time to fully start
Recently, when I start my computer, the Asrock splash screen appears, followed by the pulsating windows logo. Once this is done, it moves on to a black screen with only the cursor visible. The cursor is movable but no key commands seem to do anything. Eventually the desktop appears but it can take...
Performance & Maintenance
Black screen on boot after windows logo with mouse cursor
Hi everyone, I know it's not a blue screen, and I'm sorry if it's not in the good section. But I really need some help and ideas ^^ I posted this topic on AMD forum My computer (HD 6870 ; I5 2500k ; windows 7) is having some annoying trouble: when I boot, I get a blackscreen (but with some...
General Discussion
few seconds black screen with cursor after windows logo
I have my OS installed on my SSD. Sometimes when i power on my computer, after it shows the windows logo screen there will be a black screen with cursor for like 15-20 seconds before logon screen comes on. This doesnt always happen, i find it doing this most of the time if i had the pc off over...
General Discussion
Black screen with flashing cursor in upper corner after Dell logo
This is my first time posting here. Please forgive my ignorance, as I'm super not tech-savvy at all. I'm going to try to explain what's going on as best as I can to see if anyone can throw me a bone here. I have a Dell Inspiron 531, about 4 years old, and it's worked just fine up until...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:35.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App