Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC.exe Prompt saying there are corrupted files and they are fixed.

18 Jan 2017   #1
JLAF5150

Win 7 Home Premium 64bit
 
 
SFC.exe Prompt saying there are corrupted files and they are fixed.

Hi Everybody,

First post here should be an easy one.. Well after running sfc/scanow in cmd prompt I finally solved all my issues.. the problem I am having if I run sfc.exe it still says there are corrupted files but there is not.

I looked in the cbs log and it stated at the last part All files and registry keys listed in this transaction have been successfully repaired which they have.. I will post that part in code.. now why is when I run sfc.exe it reports there are still corruption and my question is can I clear that so it report no integrity violations??

here is part of the log:

Code:
 Repairing 2 components
2017-01-17 22:55:51, Info                  CSI    00000332 [SR] Beginning Verify and Repair transaction
2017-01-17 22:55:51, Info                  CSI    00000334 [SR] Cannot repair member file [l:24{12}]"opengl32.dll" of Microsoft-Windows-OpenGL, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2017-01-17 22:55:51, Info                  CSI    00000336 [SR] Cannot repair member file [l:24{12}]"opengl32.dll" of Microsoft-Windows-OpenGL, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2017-01-17 22:55:51, Info                  CSI    00000338 [SR] Cannot repair member file [l:24{12}]"opengl32.dll" of Microsoft-Windows-OpenGL, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2017-01-17 22:55:51, Info                  CSI    00000339 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2017-01-17 22:55:51, Info                  CSI    0000033b [SR] Cannot repair member file [l:24{12}]"opengl32.dll" of Microsoft-Windows-OpenGL, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2017-01-17 22:55:51, Info                  CSI    0000033c [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2017-01-17 22:55:51, Info                  CSI    0000033e [SR] Repair complete
2017-01-17 22:55:51, Info                  CSI    0000033f [SR] Committing transaction
2017-01-17 22:55:51, Info                  CSI    00000343 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction  have been successfully repaired



My System SpecsSystem Spec
.
19 Jan 2017   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome JLAF5150 ok well it might be worth running this too
Disk Check < if necessary include the /f and /r in the command line as per Option2 (if you are going to use the /r switch there is no need for the /f switch)

Best in safe mode.

Just out of interest are you running an AV?? if so have you scanned the machine recently? It might be as well to run these to see if they come up with anything.
SUPERAntiSpyware | Remove Malware | Remove Spyware - AntiMalware, AntiSpyware, AntiAdware!
Malwarebytes | Malwarebytes Premium
AdwCleaner Download
ADW download from bleeping computer delete any rubbish found with the malware scans
(NB If you are running Kaspersky as the main AV then it might need disabling it when trying ADW because it does not like it at times)
My System SpecsSystem Spec
20 Jan 2017   #3
JLAF5150

Win 7 Home Premium 64bit
 
 

thank you, I did run chkdsk but not in safe mode I will give that a try.. I ran Adware and it did not find anything so that is good..

I run MSE and MalewareBytes.. I also wanted to let you know this is basically a fresh install of windows on a SSD with the drive wiped internally so it is as Fresh and install as I can get..

I ran into some trouble with SimPit Warp it is a Software for Fron Projection curved screens.. I deleted it for know and am running nThusim again which I like better.. After I installed SimPit warp there where 3 files that SFC said where corrupted:

1. OpenGL32.dll
2. d3d9.dll
3.dxgi.dll

So I deleted those files in both System32 and Sys64 and recopied them from my Windows disk.. Now when I run the scan it still states that OpenGL is corrupt but when I look in the CBS.log it states that they are all fixed??

I am just trying to find out why SFC says they are corrupt and the CBS.Log says there fine.. I am also trying to find out if there is something I can clear or copy over to get SFC/Scannow to say there are no integrity viloations again.. As The PC is running Superb and back to 99.99%
My System SpecsSystem Spec
.

20 Jan 2017   #4
JLAF5150

Win 7 Home Premium 64bit
 
 

Well I just ran the chkdsk in safe mode it came back Clean.. I then ran sfc.scannow and it still states the same.. it was exactly the same as the log I posted in the 1st post.. except the time stamps are different now but same message..
My System SpecsSystem Spec
20 Jan 2017   #5
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

Hi Jlaf,
those dll's are usually referenced/used by your graphics card drivers, and are called when you run a game.
Are they upto date.

As you dont run games in safe mode there not called and the chkdsk results come back clean

Roy
My System SpecsSystem Spec
20 Jan 2017   #6
JLAF5150

Win 7 Home Premium 64bit
 
 

Well I am running the newest drivers 376.33.. Even If I run chkdsk in normal mode the same thing happens but I will run chkdsk again to see what happens..

And currently the cbs log only reports Opengl32.dll as corrupt, but I replaced them with the Windows disk and since updated my NVidia drivers.. So it should be fine..

The problem I am having is when I run SFC Scannow it reports I have corrupted files but they are not..
My System SpecsSystem Spec
22 Jan 2017   #7
JLAF5150

Win 7 Home Premium 64bit
 
 

Well I just reinstalled windows and all seems ok now thnx for all the help wish it would have turned out different but this will be good enough.. Still installing some last apps..

I did a SFC/scannow and it came back golden..
My System SpecsSystem Spec
22 Jan 2017   #8
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

And here`s some updates to avoid, they are optional/recommended but not needed.

You have to read the More Info details about every Optional/Recommended update that MS throws at you now, but it`s much better then 6 months ago


Attached Thumbnails
SFC.exe Prompt saying there are corrupted files and they are fixed.-updates-avoid.jpg  
My System SpecsSystem Spec
22 Jan 2017   #9
marytran

Windows 7 Ultimate x64
 
 

Simply restart your computer, access Safe Mode and run CHKDSK command again. I'm sure it will help you to resolve the issue.
My System SpecsSystem Spec
Reply

 SFC.exe Prompt saying there are corrupted files and they are fixed.




Thread Tools




Similar help and support threads
Thread Forum
Restoring permissions on fixed corrupted profile?
I'm going to try restoring a corrupted profile by copying files from the corrupted one to a new profile. I have the following questions: 1. Microsoft's "Fix A Corrupted User Profile" page advises not to copy ntuser.dat, ntuser.dat.log, and ntuser.ini. My corrupted profile has quite a few...
General Discussion
Many corrupted Windows7 files, SFC reads corrupted data but doesnt fix
Hello all, My copy of Windows 7 Home Premium x64 on my laptop has been having some strange issues lately. I cannot run .msi files, and device manager never populates a full list. Sometimes (rarely, but it does repeat) Windows Explorer will freeze, and if I attempt to close it and reopen it using...
Performance & Maintenance
Corrupted files not fixed through sfc scan through CMD.
Yesterday I tried to do a system restore due to bad audio drivers I installed, and got error 0xc0000022. So then I ran CMD sfc, and I got the error, "Windows source protection found corrupt files but was unable to fix some of them". So I don't know how to manually fix corrupted files, so I'm...
Performance & Maintenance
Corrupted files found by sfc /scannow cannot be fixed.
Corrupted files found by sfc /scannow cannot be fixed(please see attachment). Have gone through the sfc tutorial. The attached files cannot be fixed with chkdsk /r/f. I believe Windows7 SP1 is corrupted as my laptop cannot implement many of the current updates, and have errors when attempting to...
Performance & Maintenance
Corrupted Files + Unable to Repair + Corrupted Source
So, I reformatted my computer again. Did some SFC scans before I installed any Microsoft updates and all scans were clean. Did all the updates, drivers, program installations. Couple days later I decide to check with SFC and found some errors. There's also errors at the source, meaning I can't...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:23.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App