Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer extremely slow during and after clean install and reboots.

3 Weeks Ago   #21
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thanks for the reply ICIT2LOL, it is appreciated.

This is what I did on the previous install before the re-install yesterday.

I run mdsched.exe (Memory Diagnostics Tool) in Extended mode and it said NO memory errors were detected.

I ran the SystemDiagnostics software that came with the computer which checked:

Hard disks - OK.
Main memory - OK.
Processors - OK.
DVD/CD-ROM drives - OK.
Network adapters - OK.
Graphic adapters - OK.
Device status check - OK.

I ran perfmon /report and everything was OK.

I went through the Device Manager and checked for driver updates and everything seemed OK.

I ran Memtest86+ from my USB and got 10 passes without error.

I downloaded and ran the SeaTools for Windows. I ran:

(1) S.M.A.R.T.
(2) Short Drive Self Test.
(3) Short Generic.
(4) Long Generic (this took quite a while).

...and they all PASSED.


My System SpecsSystem Spec
.
3 Weeks Ago   #22
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Sorry mate it has me scratching around now for an answer. Now the only thing we haven't touched on is the PSU and I am wondering if you want to check it out just out of curiosity and elimination purposes because incorrect rail voltages can throw the machine off course. If you do want to check it it only takes a few minutes and use this ditty of mine to have a look and if there are things out of whack then you can always check with a physical multilmeter (digital) to make sure as soem are not fans of HW Info.
Using HW Info
PART A:
You can test the volts on the PSU with HW Info HWiNFO - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT as a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE (sometimes the usual one for Gigabyte boards)
Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
Limits +/- (minimum - correct - maximum)
12v1 = 11.4 - 12 - 12.6v
12v2 = 11.4 - 12- 12.6v
5v = 4.75 5 - 5.25v
3.3v = 3.135 3 3.465v
-12v = -10.80 - -12 - -13.20v
+5VSB = 4.75 5 - 5.25v
The Power good signal voltage at pin 8 on the 24 pin plug (grey cable) should be the same as the 5v rail reading/s
See this for the rail voltage info
PSUs 101: A Detailed Look Into Power Supplies (Section 2.)
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.

Use PART A:


Attached Thumbnails
Computer extremely slow during and after clean install and reboots.-hw-info-desktop-psu.png  
My System SpecsSystem Spec
3 Weeks Ago   #23
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thanks for that, I will give it a go.
Out of interest, which of the four in the drop down menu do I download please?
My System SpecsSystem Spec
.

3 Weeks Ago   #24
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok Paul it opens with four screens one tiny one for an update that never happens and two that give running info close all three and just use the main interface see my pic


Attached Thumbnails
Computer extremely slow during and after clean install and reboots.-hw-1.png  
My System SpecsSystem Spec
3 Weeks Ago   #25
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Sorry, my fault, I didn't explain myself properly.
I meant on the download site...

FossHub (Fast CDN)
Local (U.S.)
SAC ftp (SK)
Old versions (Archive)

Thanks in advance.
My System SpecsSystem Spec
2 Weeks Ago   #26
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Paul the US one I always use it.
My System SpecsSystem Spec
2 Weeks Ago   #27
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thanks for that.
I installed the Local (U.S.) ut it didn't give me a program like yours, it only gave me sensors or summary.
Anyway, here is the information produced for the sensors.


Attached Thumbnails
Computer extremely slow during and after clean install and reboots.-1.png   Computer extremely slow during and after clean install and reboots.-2.png   Computer extremely slow during and after clean install and reboots.-3.png   Computer extremely slow during and after clean install and reboots.-4.png  
My System SpecsSystem Spec
2 Weeks Ago   #28
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Update:

I re-installed yesterday and after installation I ran the DeskUpdate which comes with the Fujitsu computer and finds new drivers and software. I installed the drivers (System devices, other devices, display adapters, mice and other pointing devices and network adapters) that it found but NOT the software as I had previously done.
That seemed to go OK but I did get the computer shutting down on its own on occassions but nothing like before.
I have been advised advised to run the following updates after a clean iinstall in the exact order listed below (they are all .msu's):

(01) KB3191492 - I.E.11 (54,605 KB) - Restart needed.

(02) KB3020369 (09,352 KB) - Servicing Stack Update April 2015.
(03) KB3125574 (488,32 KB) - SP2 sort of.
(04) KB3172605 (29,960 KB) - This one is IMPORTANT.
(05) KB3192391 (81,053 KB) - 2016, October.
(06) KB3197867 (90,132 KB) - 2016, November.
(07) KB3205394 (64,498 KB) - 2016, December.
(08) KB3212642 (06,335 KB) - 2017, January.
(09) KB4012212 (33,976 KB) - 2017, March.
(10) KB4015546 (38,425 KB) - 2017, April.
(11) KB4019263 (31,287 KB) - 2017, May.
(12) KB4022722 (48,130 KB) - 2017, June.
(13) KB4025337 (27,080 KB) - 2917, July.

(01) Run and installed OK on the second attemp because the first attempt gave me a BSOD and shut down.
(02) Run and installed OK.
(03) I just haven't been able to get this to install on ANY of the clean install.
(04) Run and installed OK.

Then I just had no luck with (05) onwards. This is when my problems of BSOD started with constanly just shutting down and having booting problems. I tried system repair which seemed to work for a very limited time. It took minutes to boot into Windows and on many occasions I had to hard boot, sometimes two or three times to get it to boot. When it did eventually boot, clicking a link in Control Panel took minutes to open.
It seems like it runs out of memory (although we have checked this and it was OK) or times out, although power options are set to never.

Thanks in advance.
My System SpecsSystem Spec
2 Weeks Ago   #29
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Oops sorry Paul mate it completely escaped me the machine is a laptop and it will only show the charge on the battery stuff and yours looks ok so apologies again but that is the right site. It is worth keeping that program for future use into looking at system details.

Look I am having serious broadband issues here as I just had the new national system put on and it is making posting a nightmare. So I shall be shutting down for the night shortly but anyway if you reinstalled just how did you do that?? and if you did a clean install with an ISO did you clean the drive first. My guess is that you are doing a factory restore and I am not sure if everything is ok with that.
My System SpecsSystem Spec
2 Weeks Ago   #30
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

No problems ICIT2LOL, I appreciate you sticking with me on this.

Quote   Quote: Originally Posted by ICIT2LOL View Post
...if you reinstalled just how did you do that?? and if you did a clean install with an ISO did you clean the drive first. My guess is that you are doing a factory restore and I am not sure if everything is ok with that.
I reinstalled from the recovery DVD that came with the laptop.

I am waiting for some DVD's to be delivered, hopefully either today or tomorrow.
The ISO that I downloaded and used on one previous occasion I burnt a 8x. When I get the DVD's I will burn it again at 4x to see if that makes a difference. At least from an ISO it should be OK, otherwise it will be something to do with the computer. When I do this I will clean all with DiskPart (again).

Thanks again.
My System SpecsSystem Spec
Reply

 Computer extremely slow during and after clean install and reboots.




Thread Tools




Similar help and support threads
Thread Forum
Extremely slow Windows 7 Installation (Clean)
My friend's Computer recently crashed and fails to boot up. It had 2 partitions (1 HDD) and was to the brink of its capacity. Seeing that it was no longer booting up, I initially tried loading up an install CD and attempted to repair the windows install. This attempt failed when it told me that the...
Installation & Setup
After a clean install.. my internet is extremely slow.
On Thursday I decided I was going to do a clean install of windows 7. I initially had windows home, but installed windows 7 pro this time. I created a backup on my external and proceeded to do a clean install. When the install was finished. I installed the motherboard drivers, then the video...
Network & Sharing
Win 7 clean install on new computer, extremely slow loading apps
solved
Performance & Maintenance
Extremely slow boot+log-on, poor performance after clean install
Well, I guess I'll just jump right into this. As the title says, I recently did a clean install of Windows 7 (deleted all my hard drive partitions, including the system reserved one, reformatted and then installed Win7) and since then I've been noticing some strange issues that I did not experience...
Performance & Maintenance
Extremely slow startup after Windows 7 clean install
I recently did a clean install from Windows Vista 32 bit to Windows 7 Ultimate 64 bit. Each time I try to restart or turn on my computer, it takes about 15 minutes to boot. It gets stuck at the starting Windows screen for the majority of that time and it looks like the hard drive does not show...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:49.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App